Great video… doing the same to my Bravo III right now. Nice to learn all of the tips and tricks. A few minutes into the video, I figured out that you sound like Ron White! I was imagining you with a cigar and a glass of scotch getting ready to tell a story about your ex-wife and a boat..:
Man what a great video wish you was in Florida I’d bring my Rinker/bravo three to ya. I’ve done the complete trans one assembly got my outdrive completely redone and now ready to enjoy but looks like the outdrive oil line is leaking lime a siv…😢 drive is full and the reservoir is empty and saw a little puddle tonight until I lowered the drive and it all poured out😮. Uuugh supposed take her to TN in three weeks, anyway awesome stuff man keep it up for us!!
Thank you and Thanks for watching, i have a 5th wheel set up in Florida but i live in SC and im at home for a while working on some of my boat projects
Thank you so much and Thanks for watching Vassmotorsports, im always doing custom work to boats and cars etc. Or even maintenance, motor swaps anything on boats from front to back in and out , so ill try to post more videos soon and thru the future. Have you seen the amazing super air Nautique g25 wake boat I did my custom touches on recently czcams.com/play/PLdT80g2lqT-CCYLNbUBrfjXbh5oOU48RN.html. Please subscribe and help my little channel grow, thanks again
Amazing Video! Thanks so very much man! I'm shopping for the Bellows Kit for my Mercruiser Bravo 3 on my Cobalt 220. Local Marina is a no, and Amazon Kits seem sketchy with reviews and low low prices. Do you have a suggestion on where to pick up a full kit that would be legit?
thanks so much for that. and thanks for watching Vassmotorsports and hope ya check out some of my other videos, I always buy the cheap kits on Ebay for $50 or less and always have good luck with them over the years and do all my boats and others for few people that can talk me into working on their stuff also haha (hardly have time for customers) the bearings even work fine and last many years and we use our boats alot , the weak link i feel with these kits is the shift bellow ,so i purchase a good Quicksilver seperately and can get around $30 or sometimes less without the clamps and just use clamps from the kit or the originals if clean and damage free. I ve bought the $300 kits before and dont see much difference,
my top cable (throttle) came loose far away from home, I stopped at a marina and they hooked it back up, made it home, and then it didn't want to go into forward or reverse. A mechanic told me that I need to replace the shift cable, but after he adjusted it, it started working again. On my last trip out it done ok, doesn't seem like it's getting full throttle. so my question is do I need to replace it or not ??? thanks... Great video too, It's a 2000 Rinker fiesta vee 270
Well thanks for watching Vassmotorsports, but that is a hard one to answer especially without seeing the boat in person, the throttle cable and shift cables have nothing to do with each other , if it's tight and tough to move shifter handle then try pushing in the round button at bottom (to put into neutral) and see if it's easier, if it is one of the shift cables are bad ,and even tho lower is more common to go bad it could be either and would have to disconnect at manifold and try again to see if changes , as far as not feeling like it's going as fast sounds more like the throttle cable itself or throttle/shifter handle mechanism , where did top cable come loose ? On throttle assembly or engine side ? Again sorry and hard to say without seeing it , hope this helps some
@@jimsr.4019 ok. You can put throttle all the way forward and see if throttle inside carb or throttle body plate is opening all the way against the stop , just to see if that has anything to do with the low power feeling
Im in Gray Court SC. So heck of a drive when has to be someone local to ya ,Thanks for watching Vassmotorsports and hope ya check out some of my other videos
Can do in few hours or an afternoon if stay busy and know where your tools are lol. I was doing other service to the boat in between so took most of my day
have to remove it to slide the cable thru the transom assembly to replace the shift cable bellow , it will not fit without removing this end piece , thanks for watching Vassmotorsports and hope ya check out some of my other videos, good luck with your project
There's a guy on CZcams that replaced the bellows on alpha sterndrive without taking the sterndrive off, do you reckon that would work on bravo?czcams.com/video/jJVfDbhwkwU/video.html
No it won't work on either. Drive has to come off to do the u-joint bellow. No other way to get it over the shaft. He must have only replaced exhaust or shift bellow. Impossible to do all 3 with drive on
This is the best video for Bravo bellows and shift cable replacement on CZcams thank you.
Wow thanks alot for that. And thanks for watching Vassmotorsports, hope ya check out some of my other videos
Great video… doing the same to my Bravo III right now. Nice to learn all of the tips and tricks. A few minutes into the video, I figured out that you sound like Ron White! I was imagining you with a cigar and a glass of scotch getting ready to tell a story about your ex-wife and a boat..:
Hahaha. I wish I had some Ron White money lol
always smiling and happy you must have a good life thank you for all the videos you put up especially when your always busy
Thank you for taking the time to share that!
Man what a great video wish you was in Florida I’d bring my Rinker/bravo three to ya.
I’ve done the complete trans one assembly got my outdrive completely redone and now ready to enjoy but looks like the outdrive oil line is leaking lime a siv…😢 drive is full and the reservoir is empty and saw a little puddle tonight until I lowered the drive and it all poured out😮. Uuugh supposed take her to TN in three weeks, anyway awesome stuff man keep it up for us!!
Thank you and Thanks for watching, i have a 5th wheel set up in Florida but i live in SC and im at home for a while working on some of my boat projects
thanks for taking the time to share some of your knowledge. much appreciated.
Thank you so much and Thanks for watching Vassmotorsports, im always doing custom work to boats and cars etc. Or even maintenance, motor swaps anything on boats from front to back in and out , so ill try to post more videos soon and thru the future. Have you seen the amazing super air Nautique g25 wake boat I did my custom touches on recently czcams.com/play/PLdT80g2lqT-CCYLNbUBrfjXbh5oOU48RN.html. Please subscribe and help my little channel grow, thanks again
interesting video thank you for putting it up
man great video
Great video, thanks man 💪
good videos thanks
❤Merci beaucoup ❤❤❤❤❤❤❤❤❤❤
🤝
doing my 2006 bravo 3 tomorrow
Good luck with that ,hopefully everything goes smoothly
Amazing Video! Thanks so very much man! I'm shopping for the Bellows Kit for my Mercruiser Bravo 3 on my Cobalt 220. Local Marina is a no, and Amazon Kits seem sketchy with reviews and low low prices. Do you have a suggestion on where to pick up a full kit that would be legit?
thanks so much for that. and thanks for watching Vassmotorsports and hope ya check out some of my other videos, I always buy the cheap kits on Ebay for $50 or less and always have good luck with them over the years and do all my boats and others for few people that can talk me into working on their stuff also haha (hardly have time for customers) the bearings even work fine and last many years and we use our boats alot , the weak link i feel with these kits is the shift bellow ,so i purchase a good Quicksilver seperately and can get around $30 or sometimes less without the clamps and just use clamps from the kit or the originals if clean and damage free. I ve bought the $300 kits before and dont see much difference,
@@Vassmotorsports Yes I have checked out the other Vids... Lov'em. Thanks for that reply... I feel better about the future purchase :)
@@flemingfamilyadventures3035 no problem. Hope you get it knocked out ,
my top cable (throttle) came loose far away from home, I stopped at a marina and they hooked it back up, made it home, and then it didn't want to go into forward or reverse. A mechanic told me that I need to replace the shift cable, but after he adjusted it, it started working again. On my last trip out it done ok, doesn't seem like it's getting full throttle. so my question is do I need to replace it or not ??? thanks... Great video too, It's a 2000 Rinker fiesta vee 270
Well thanks for watching Vassmotorsports, but that is a hard one to answer especially without seeing the boat in person, the throttle cable and shift cables have nothing to do with each other , if it's tight and tough to move shifter handle then try pushing in the round button at bottom (to put into neutral) and see if it's easier, if it is one of the shift cables are bad ,and even tho lower is more common to go bad it could be either and would have to disconnect at manifold and try again to see if changes , as far as not feeling like it's going as fast sounds more like the throttle cable itself or throttle/shifter handle mechanism , where did top cable come loose ? On throttle assembly or engine side ? Again sorry and hard to say without seeing it , hope this helps some
the throttle cable came loose off of the pin on of the back mount@@Vassmotorsports
@@jimsr.4019 ok. You can put throttle all the way forward and see if throttle inside carb or throttle body plate is opening all the way against the stop , just to see if that has anything to do with the low power feeling
Where are you located? I’m near Louisville Ky. and wanting to get this work done.
Im in Gray Court SC. So heck of a drive when has to be someone local to ya ,Thanks for watching Vassmotorsports and hope ya check out some of my other videos
Could I replace the U Joint bellow without removing the shift cable?
Yes you can. It's tight but I've done it. Thanks for watching Vassmotorsports
wow super guy very good video
Thanks so much for that and thanks for watching Vassmotorsports. Hope ya check out some of my other videos, and good luck with your boat repairs
how long did this take you to do?
Can do in few hours or an afternoon if stay busy and know where your tools are lol. I was doing other service to the boat in between so took most of my day
Why are you removing the shifter cable? drive end of shifter cable open to slip it on .... no?
have to remove it to slide the cable thru the transom assembly to replace the shift cable bellow , it will not fit without removing this end piece , thanks for watching Vassmotorsports and hope ya check out some of my other videos, good luck with your project
There's a guy on CZcams that replaced the bellows on alpha sterndrive without taking the sterndrive off, do you reckon that would work on bravo?czcams.com/video/jJVfDbhwkwU/video.html
No it won't work on either. Drive has to come off to do the u-joint bellow. No other way to get it over the shaft. He must have only replaced exhaust or shift bellow. Impossible to do all 3 with drive on
The drive must come off to set the inner ring .