Hangar 9 CubCrafters XCub 60cc Build - Overview, Prep, and Control Arm Installation

Please click "...more / Show more" for links and more information. Visit www.horizonhobby.com/product/... for more information on the CubCrafters XCub 60cc.
Welcome to the first build video in the Hangar 9 CubCrafters XCub 60cc build, part of the Hangar 9 Back to Balsa Series! This video gives an overview of the electronics, engine, and propeller that will be used in this XCub 60cc for the build. You will also see how to prep the covering on your XCub 60cc for the build. during shipping, the XCub's UltraCote covering is often exposed to many changes in temperature, humidity, and pressure which may result in wrinkles. It is a good practice to go over all of the covering with a heat gun or iron to shrink it and get rid of the wrinkles. This ultimately eliminates the risk of potentially loose covering tearing off in flight. Lastly, you will see a good technique in how to install the control arms into the control surfaces.
Aircraft Setup:
Engine - DLE 55RA
Propeller - Falcon 23x8 Carbon Gas
Servos - Spektrum A6320 for surfaces and Spektrum A6330 for throttle
Receiver - Spektrum AR20400T with two 7.4V 4000mAh 2S 15C Smart LiPo Receiver Batteries
Kill Switch - Tech Aero IBEC HV
Fuel Tank - AJ Aircraft 24 oz.
(4) Spektrum 24-inch Servo Extension [SPMA3005]
(2) 12-inch EC3 Battery Extension [SPMEXEC312]
(1) Dubro Super Strength Long Servo Arm: 23T [DUB671]
(2) Aluminum Servo Arm - [HAN9151]
Watch the rest of the Hangar 9 CubCrafters XCub 60cc build videos here! - • CubCrafters XCub 60cc ...
Follow Hangar 9 on Facebook!
/ hangar9rc

[@Hangar9RC]

Please click "...more / Show more" for links and more information. Visit www.horizonhobby.com/product/HAN5260B.html for more information on the CubCrafters XCub 60cc.
Welcome to the first build video in the Hangar 9 CubCrafters XCub 60cc build, part of the Hangar 9 Back to Balsa Series! This video gives an overview of the electronics, engine, and propeller that will be used in this XCub 60cc for the build. You will also see how to prep the covering on your XCub 60cc for the build. during shipping, the XCub's UltraCote covering is often exposed to many changes in temperature, humidity, and pressure which may result in wrinkles. It is a good practice to go over all of the covering with a heat gun or iron to shrink it and get rid of the wrinkles. This ultimately eliminates the risk of potentially loose covering tearing off in flight. Lastly, you will see a good technique in how to install the control arms into the control surfaces.
Aircraft Setup:
Engine - DLE 55RA
Propeller - Falcon 23x8 Carbon Gas
Servos - Spektrum A6320 for surfaces and Spektrum A6330 for throttle
Receiver - Spektrum AR20400T with two 7.4V 4000mAh 2S 15C Smart LiPo Receiver Batteries
Kill Switch - Tech Aero IBEC HV
Fuel Tank - AJ Aircraft 24 oz.
(4) Spektrum 24-inch Servo Extension [SPMA3005]
(2) 12-inch EC3 Battery Extension [SPMEXEC312]
(1) Dubro Super Strength Long Servo Arm: 23T [DUB671]
(2) Aluminum Servo Arm - [HAN9151]
Watch the rest of the Hangar 9 CubCrafters XCub 60cc build videos here! - czcams.com/play/PLUfse7Ks5AZiX6KAoGCayDQvm6HSlzVC0.html
Follow Hangar 9 on Facebook!
facebook.com/Hangar9RC/