How To Make Your Own RUST KILLER.... STOP RUST FAST! BoomZilla Video Series #4
Vložit
- čas přidán 19. 02. 2021
- How To Save Money making your own RUST STOPPER we have found nothing else that works this well. This SPC Special Concoction Mix not only works better than any store-bought but also loosens rust on rusty bolts, nuts, and all-metal connections saving you time when you have to replace parts. This mix can even be painted over when you are ready to do so.
Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bdf6a6ky
We Guarantee you will love it.
Prior Videos in the SERIES:
1st • How To ReConditioning ... Overview of Project
2nd • How To STOP Wheel RUST... Tire and Wheel Reconditioning
3rd • How To SHINE The WORST... Paint Refurbing
USA TOOLS:
Dawn UL PLAT amzn.to/37wpgrf
Trans Fluid amzn.to/3aBGlBS
Blaster amzn.to/2OTeLYF
Spray Bottles amzn.to/3axb7vV
Sprayer Wand amzn.to/37rTnQM
Air Compressor amzn.to/2Zueeyb
Airline amzn.to/3qC95jM
_________________________________________________________
UK TOOLS:
Dawn amzn.to/3dsLZbv
Trans Fluid amzn.to/3pxWHzP
Blaster amzn.to/3uPypV7
Spray Bottles amzn.to/2ZyESpY
Spray Wand amzn.to/3qDc9Mi
Air Compressor amzn.to/3qBLzU0
______________________________________________
Australia Tools
Dawn amzn.to/3r3pnCe
Blaster amzn.to/2MdA9H8
The extremely small compensation we receive from these amazon links helps to keep our channel
available to you all for FREE!
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this CZcams channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS. - Auta a dopravní prostředky
Hello to all of our Great Subscribers!! *** Here is another restoration video on BoomZilla. Make sure you are always checking the new videos that are coming out. This rust stop mix will blow your mind we promise that. ***ALSO, DONT FORGET OUR SWEET SUNDAY REVIEWS ARE COMING BACK TOMORROW! Quote of the Day: If we did all the things we are capable of doing, we would literally astound ourselves.*** Thomas E,
Have you tried this with a garden sprayer? I'm thinking of the added reach and angled sprayer tip..?
Hi I live in Pensacola fl on barancas next to the golf course where y’all shop located so I can get my vehicle cerimic coated message me plz . 19 Audi A4
Yeah keep this good stuff coming my man great job
Thank you very much my friend! We appreciate your view and comment. Hope you have a great evening. mad Mike the hammer SPC
@@SweetProjectCars You didn't show the "after".....disappointing
Transmission fluid also is great on wood trailer boards. I learned this trick from a national park ranger. Spray the wood with a mix of diesel fuel and transmission fluid, let it dry for a few days and boom, wood is basically sealed and will last for years
Thank you for watching and sharing my friend! Hope you have a great day. mad Mike the hammer SPC
Does it add color?
,another amazing wood preserver/ hardener is the toxic (pink)kind of antifreeze. It actually bonds wuth the wood fibers.
What the ratio?
I've used motor oil with good results
Started with the AC video, worked over to the leather cleaning, watched the boom truck operation and now on rust prevention….it’s become evident that this channel has everything but the kitchen sink. Swiss pocketknife of CZcams diy and resourcefulness. Thank you!
Glad to help JP! Thank you for watching, we truly appreciate it my friend. Have a fantastic weekend. mad Mike the hammer SPC
If it's a SPC video, you can stake your life whatever it is about, it WORKS. PERIOD. I've used a lot of ideas from this channel and never been let down.
Thank you so much Irish Viking! We truly appreciate the view and comment my friend, comments like yours make all we do worth it! Thanks again, have a fantastic rest of your week. mad Mike the hammer SPC & team
What is your Blaster?
Hey Jerry! Made your rust killer formula on my 68 El Camino that's been sitting at the beach for about 25years. This stuff kicks ass, and will trim a lot of hours off the restoration of my 1968 El Camino restoration. Geezers like me appreciate your great tricks you share with us!!!
Glad we could help Enrique!!! That is great to hear! Thank you for watching and sharing your stupendous results, hope you have a sweeeeet week and a Happy Thanksgiving my friend. mad Mike & team
Glad we could help Enrique!! Thank you so much for watching and sharing your stupendous results, hope you have a sweeeeet week and a Happy Thanksgiving my friend. mad Mike & team
What is blaster?
Pb blaster
Finally, a cure for car cancer. Your Nobel prize money is in the mail.
Thank you very much Will, we will be watching out for it LOL :) Thank you for the view my friend. Hope you have a fantastic day. mad Mike the hammer SPC
More like car cancer 'treatment'.
Just want to thank you again,watched your video a year ago,and put it on my rusty tundra frame that was almost recalled,but the dealer sprayed it instead.dealer did a horrible job and it fell off a year later.i love that combination of fluids 😅and it works good has stop the rust from spreading and the wicking is unbelievable,spayed it on one spot in middle of frame came back a day later and was wrapped from top to bottom.im so glad you posted this video keep it up I’ll be watching for new great ideas.2008 rusty tundra guy..
Glad we could help, rusty tundra guy :) LOL Thank you for watching and sharing your awesome results, we really appreciate it, hope you have a great week Ron. mad Mike the hammer SPC
Dawn (most dish soap/liquid detergent) is a excellent surfactant. Makes the chemical wetter, tends to cover more area. We put soap in weed killer when spraying the pastures.
Yes it's good, thanks for sharing and watching mr good times :) Hope you have a great day. mad Mike the hammer SPC
Spraying poison in pastures?? Where our food animals eat? Please explain why that is a healthy smart idea? I must be missing something? Do you work for Monsanto?
@@seeer3240 it's called 2-4-D look it up. And I'm pretty sure your animals don't eat on these pastures.
@@seeer3240 If you do not kill weeds on pasture land the weeds kill out the grass. The live stock cannot eat some types of weeds so they will have less food to eat each year.
I want to thank you for sharing this with us on how to make the rust killer . You all always have great content on your videos. I found you all back several months ago, but I had sort of lost touch with all till I just found this a few minutes ago . I will be watching for more videos, so you all be careful and stay safe and keep on working and being helpful to viewers out here.
As always, Jeffrey !!!
We appreciate that Jeffrey! Thank you for watching and sharing, it makes all we do worth it when we have great viewers like you! Have a fantastic week my friend. mad Mike the hammer SPC
Great information for us welders and wood workers too!!! So happy you are sharing secret formula. I have many wood tools this should work just as a wipe-on. I also have lots of scrap metal I keep for projects.
Really great!
Glad to help! Thank you for watching and sharing, we really appreciate it, have a fantastic day my friend. mad Mike the hammer SPC
My old Toyota truck needs a little bit of this tender love. Sounds like a great project for once the snow melts and warms up a bit. Of course you don't know what snow is anymore. Old memories LOL
Sounds great! And I gotta tell you Leonard, I will never miss that snow :) Those are old memories and we are thankful for that :) Have a great day. mad Mike the hammer SPC
Dawn is also the best glass cleaner you will ever use. Mix up a bit in a bucket, like you are washing dishes. Dunk a terrycloth towel in the bucket. Ring it out. Clean your glass with your damp terry towel. Dry and buff with a soft microfiber towel... Scary clean.
Thanks for sharing and watching Jim. Have a great day. mad Mike the hammer SPC
Palmolive is better on glass then dawn and it’s cheaper.
I use motor oil
@@waterloo123100 Madge ,also, has been recommending it for years because it keeps your hands looking young. 😁
"you're soaking in it "
"Sippin' cyanide and Kool-Aid with Jim Jones." 😎✌
I like CarPro Eraser and a squeegee for glass. 👍
I can vouch for the power of ATF because my old Mustang had a transmission leak on the right side and it would run down and get on the bottom of the floor pans. And those floor pans still look like new where the ATF sat on them and soaked in.
Nice! Thanks for watching and sharing Mark, we really appreciate it. Have a great day. mad Mike the hammer SPC
Any kind of oil mixed with the road dirt will prevent rust well; cars that have engine oil leaks never rust on that side, or on all sides if it's the oil pan gasket,had a Camaro like that, needed half a quart every 300 miles.
Impressive. First timer, here. I’ve subscribed. TU so much. What a blessing!
Welcome aboard! Thanks for joining us, we appreciate it. Have a fantastic evening. mad Mike the hammer SPC
SPCs always has great DIY videos. I truly appreciate your videos sir !!!
So nice of you, thank you very much, we truly appreciate it my friend. Thanks for watching. Hope your day is fantastic. mad Mike the hammer SPC
😊😊¼0@😊SweetProjectCars
Thank you again for being amazing. Hope all is going well for you and your family.
Thank you very much Shawn, we truly appreciate it my friend. Hoping all is well with you and yours also, have a great evening. mad Mike the hammer SPC
As always I love your video's.......your video's are a real time & money saver...Thank You!! for all of the hard work,time you put into your video's to share with your viewers !!
Glad to help Frederick, it's our pleasure. Thank you so much for watching and for your kind words, we really appreciate it, it makes all we do worth it. Hope your day is the best. mad Mike the hammer SPC
You are a genius! I used to work on a golf course and when we needed to keep moisture on the greens we would add Dawn to the sprayer. It would bind the water molecules to the plant. Thanks again!
Glad it was helpful Sean! Thank you so much for watching and sharing, we really appreciate it. Hope you have a fantastic weekend my friend. mad Mike the hammer SPC
Interesting. Usually soap will kill plants in the sun.
I don't get it, water is bad for metal
Hello You are correct transmission fluid mist definitely stops rust even before it starts. Bought a 89 K5 Blazer. The rear trans seal had a slight leak and coated the underneath of the blazer which were areas that they rusted out. Due to this leak when I purchased it I found truck was preserved No Rust. Excellent video
Nice!! Thank you for watching and sharing Joseph, we appreciate it. Have a great day. mad Mike the hammer SPC
Great Mike. Take care and look after yourself and family etc in these difficult times.
Thanks, you too! All is well here at SPC, thank you for watching Hari! Hope you have a great day my friend. mad Mike the hammer SPC
Thanks for the tip. I'm always looking for a rust killer. Great video!!
You will love this mixture Mike! Thank you for watching, we truly appreciate it. Hope you have a great day. mad Mike the hammer SPC
THANK YOU, THANK YOU, THANK YOU!!! Gonna try this on my '76 El Camino.
You're welcome Brian! You will love the results my friend. Have a fantastic day. mad Mike the hammer SPC
Me too I'll definitely do this on my 96 Ford Bronco, thank you very much Sir for sharing this on your CZcams ....
Very nice stuff Mike. Thanks for sharing and have a great weekend guys! Dutch regards, Nico
Thanks! You too Nico! Take care my friend. Hope you have a great evening. mad Mike the hammer SPC
WTF? I'm genuinely impressed! I've used ATF and acetone mixed in equal parts before to free up bolts and it dissolves the hell out of rust! So I believe that it does work. It's the soap component that has got me blown away. I have to give this stuff a try.
You will love it, Jeff! Thank you for watching and sharing, we really appreciate it, have a great week my friend. mad Mike the hammer SPC
Thanks for the great tip! I have a bit of rust under the fuel door of my car. I'm going to do this before it gets any worse!
Absolutely Donna! Thank you for watching and sharing, we truly appreciate it. Hope your day is the best! mad Mike the hammer SPC
If you want that spot to last longer without rusting more you need to sand it primer and paint it, or you can use whats on the video but you will have to reapply probably every couple Weeks or months depending on how much it rains I suppose
Love your channel! Your always giving us some of the best advice I've ever heard of, and product advice as well! Thank you so much for keeping a good thing going!
Thanks so much! We really appreciate the view and kind comment my friend. Have a fantastic day. mad Mike the hammer SPC
I have used just ATF for years on bare metal. I have never found anything better. I never thought of adding PB Blaster and Dawn to it, but I am definitely going to try it.
You will love it Hubba! :) Thanks for watching and sharing, hope you have a fantastic day my friend. mad Mike the hammer SPC
@@SweetProjectCars hello, just found your video on the rust killer, I was wondering what is the product you use (4on of the yellows stuff), we live in Canada and rust is part of our live, too much salt on the winter icy roads to make our lives better but hell for our cars and trucks. Thank you very much.
@@pierrejoly9094 PB Blaster. Ne’er to find it in a bulk container not the little spray cans
I have no need for this but just enjoy watching videos from people who know stuff. This was so interesting.
Thank you very much Peggy, we appreciate the view, hope you have a great week my friend. mad Mike the hammer SPC
Great video and tips, I can use this one for sure, thank you!
Glad it was helpful!
I used this on my f150 2013 on the rusty spots on the frame. It looks great and I think it’s going to be very worth while.
Awesome Jimmy! Glad we could help, thank you for watching and sharing, we really appreciate it, have a great week my friend. mad Mike the hammer SPC
Used your trick of baby oil covered by garbage bag for floor pans. This looks good too. Say hola to Julio for me
Will do dave! Thanks for watching and sharing, we truly appreciate it my friend! Hope you have a stupendous day. mad Mike the hammer SPC
Great video ! Thx for helping me put my rusty fiat back on the road🤠
Thank you very much, it's our pleasure Zippy! Thank you so much for watching and sharing, we appreciate it my friend. Hope you have a great day. mad Mike the hammer SPC
WOW THANK YOU THIS IS SO FANTASTIC 💯🇬🇧
Glad you enjoyed it Racer! Thank you for watching and for your comment, we appreciate it. Hope you have a fantastic day. mad Mike the hammer SPC
The frame on my toyota tacoma was supposed to be replaced...based on Vin and recall notice... When the dealership inspection was completed, the said my frame wash n perfect shape and does not need replacing... Oh, and they asked " who applied the undercoating " I did it myself with a secret formula
That is sweeeeeeet Mooseracks!! Great work my friend! Thank you for watching and sharing your results, hope you have a fantastic day. mad Mike
Thanks for sharing your tips and tricks!
Glad you like them! It's our pleasure. Thank you for watching. Have a great day John! mad Mike the hammer SPC
This is truly Sweeeeeeet! Thanks for sharing!
Glad you liked it! Thank you very much for the view and comment Danny! Hope you have a great week. mad Mike the hammer SPC
Yes, I've been using ATF for years on rust! Works well on all rust....
Great to hear! Thank you for watching and sharing my friend. Hope your day is the best. mad Mike the hammer SPC
Using straight ATF, no mixing?
How often do you reapply the ATF?
Once a year!
Does the rust color go away? Or it stays
@@rev.w.santos2764 thanks!
I used to work on those Altec boom trucks for the Jacksonville Electric Authority. They're quite an interesting and well designed piece of equipment, it should serve its ownership well if maintained properly. SPC: Thanks for another video that shows us how to make life a little easier and our battle against rust more easily accomplished.
It's our pleasure William! Thank you so much for watching and sharing your interesting info, we appreciate it my friend. Have a great day. mad Mike the hammer SPC
What is
What did you say the orange one is n Smith 🇺🇸
You can be sure I will be doing this to my daily driver 12yrs old & 66000 miles .
On and off road in Wisconsin, still a solid 4×4
You'll be glad you did Eric! Thank you for watching and sharing, hope you have a great weekend. mad Mike the hammer SPC
My daily driver is 20 yes old over 400thousand miles doesn't use oil still going strong
Thanks for the video. Transmission fluid contains detergents which is why it’s used in a transmission.
Thanks for watching and sharing. Have a great day. mad Mike the hammer SPC
@@SweetProjectCars welcome. Thanks for the great videos and tips !
You got me hooked for the whole video. When is it coming out? Thumbs up 👍
Our videos are posted every Saturday, so stay tuned my friend! Thank you for watching, we appreciate it. Hope you have a fantastic day. mad Mike the hammer SPC
Thanks for the tips!! Looks like 4oz of Blaster, 12oz trans fluid and 1oz of Dawn.
Our pleasure my friend. Thank you for watching, have a great day. mad Mike the hammer SPC
@@SweetProjectCars He said this makes a total of 16 oz so since he makes it clear there is 4 oz of Blaster and 1 oz of Dawn there must be 11 oz of transmission fluid?
@@microgreensgrower3946 it has 12 oz ATF so it makes 17oz total👍🏼
What is blaster
@@SweetProjectCarsI apologise for asking, probably too obvious in US, but what is a blaster? I'm in UK and never heard about it, thanks
Zep Acidic Toilet Bowl Cleaner quickly removes rust. Its powerful 10 percent Hydrochloric Acid gel formula enables the cleaner to dissolve the heaviest rust buildup. The thick gel clings to vertical surfaces. I am a Machinist with over 30 years experience and I am super picky, trust me buy a gallon of this for about $13 and you will never use anything else for removing rust again.
You can use whatever you want to use we are just sharing what we know works and is safe for both you and your vehicle. Have a great day. mad Mike
& wishing you a safe & happy time. Thanks Bill
Same to you! Thank you for watching Bill, we appreciate it my friend. Have a great day. mad Mike the hammer SPC
I desperately needed this
Glad we could help! Thank you for the view and comment, we really appreciate it. Have a great day. mad Mike the hammer SPC
The dish soap works because it breaks the surface tension allowing the fluid to lay flat and not bead up... works for almost anything you want to spray for coverage... even homemade herbicides like vinegar and salt... add dish soap and it keeps the solution from 'beading up'
Thanks for the info! Hope you have a great day! mad Mike the hammer SPC
It's like flux for solder. Break the tension and allow it to pool
Surfactant
@@Leatherstockingfella that's what she said 😅
Great info. I plan to make up a batch and use on the inside of my van’s door panels. I use dawn for removing grease before painting and it’s good for washing your greasy hands after working on the car (use something like cornhuskers lotion afterward because it will dry out your hands)
Sounds great! We're with you on the dawn, we do the same thing to wash hands after dirty work! Thank you for watching and sharing Don, hope you have a great week my friend and all the best on your project. mad Mike the hammer SPC
What's in that Corn Huskers Lotion? I put some of that on my hands right before I went to pick up my little grandson. He slipped right through my hands. I didn't have him that far off the floor yet as I went to lift him so he wasn't hurt but I was shocked that the huskers left my skin with no grip ability. That was the first and the last time I ever used Corn Huskers. Scary stuff.
This is terrific! Thanks so much fellas.
Our pleasure Dave! Thank you for watching and sharing, we really appreciate it, have a fantastic week my friend. mad Mike the hammer SPC
Goodbye Krown! Nice. Can't wait for the snow to melt.
Thank you for watching Mikey! Sorry about the snow :( Hope you have a great day. mad Mike the hammer SPC
Mike, I wish I had this formula 30 years ago..Boat trailers showed the age. I was using Boeing T-9 and that stuff cost $$$. ..Thank you..
Thanks Kyle! Appreciate your view and comment! Hope your day is the best my friend. mad Mike the hammer SPC
Thanks for this. Its going to work amazing in my toranardo gun..between your concoction and the way the Toranardo applys the chemical
Glad to help! Thank you for watching and sharing, have a great week my friend. mad Mike the hammer SPC
How is it holding now ? Also did you undercoat?
Thanks for sharing guys. Dutch regards, Nico.
Our pleasure! Thank you Nico! Hope your day is the best. mad Mike the hammer SPC
I'm so impressed!
Thank you very much, we appreciate your view and comment. Have a fantastic day. mad Mike the hammer SPC
Nice recipe. I used half-half ATF and melted petroleum jelly for consistency. Will try yours too.
Thanks for watching and sharing, we appreciate it. Have a great day. mad Mike the hammer SPC
Anything that will keep the oxygen away from the metal will stop it from rusting keep that in mind oxygen is what makes the metal rust, if only we could wrap a Ziploc baggie Around our vehicles and suck all the oxygen out wouldn’t that be great
Wow very cool I have a 03 suburban and there is some serious rust underneath I was going to use Corroseal but now I'm using this method. I really like that you can spray it safely everywhere not so with the Corroseal
Thanks for sharing 😁👍
Glad we could help! Thank you for watching and commenting! Hope you have a great day my friend. mad Mike the hammer SPC
@@SweetProjectCars Yes liked 👍and subbed and saved to my Suburban videos. Can't wait to do this I live in the rust belt and I'm going to be bringing the Suburban on the beach this summer so I want to address the rust issue before hand.
Thanks again for sharing this will be a massive help 👍😁✌
@@SweetProjectCars Hey Mad Mike I'm getting read to do this to my suburban I just have a question can I spray undercoat over this and if so is there any preparation like drying time for the mix or can I just spray over it ? Thanks in advance 😁✌
Zombie: Corroseal would work differently ... use it if you want to attack the rust problem and convert the rust to a paintable surface then paint it. If done correctly it should stop any future rust, as long as your surface was prepped right, the corroseal applied right and your finish coat of paint applied right. SPC's concoction is to prevent further rust UNTIL you decide to attack the problem, not INSTEAD of attacking the problem.
Another excellent video, thanks for the info.
Glad you enjoyed it, it's our pleasure my friend! Thanks for watching. Have a great evening. mad Mike the hammer SPC
Fluid Film is my go-to. Problem is, it's just so darn expensive for how little you get. And it can take a few cans to do a whole vehicle. Could easily run you $30+ to do the job. Your alternative seems more cost effective. Thanks for sharing
Buy the gallon.
Totally agree! Thank you for watching and sharing, we really appreciate it my friend. Hope you have a great day. mad Mike the hammer SPC
I missed the 3rd ingredient..I got tranny fluid and dawn. What was the 1st?
@@jeanine0125He said "Blaster" ..I assume PB Blaster?
@@Note10plusAura Thank you. Lol
This is genius great for boat trailers thanks for the tips 👍
Glad you like them! Thank you very much, we really appreciate it Paul! Thanks for watching, hope you have a great day. mad Mike the hammer SPC
I guess Julio no longer down by the school yard, now a chemist in the laboratory, way to go J !!!
LOL, nope, he's our mad scientist now :) Thanks for watching Paul, have a great weekend. mad Mike the hammer SPC
Love your videos! Thanks!
Glad you like them! Thank you for watching Michael, have a fantastic weekend my friend. mad Mike the hammer SPC
👍 Sounds promising. Look forward to the follow-up vid. [Rewinding to get that mix ratio/additive measure now....]
Thank you! Cheers! Hope your day is the best! Thanks for watching my friend. mad Mike the hammer SPC
Landscaping tip. Add dawn to roundup. It will make it stick to anything you spray.
Thank you for watching and sharing Ron! Hope you have a great day. mad Mike the hammer SPC
Roudup is an ecological and biological (including humans) poison. Please find an alternative.
@@Marcoosianism nah
Roundup spray adjuvant based on ammonium sulfate will do more good. Even better in drought conditions or on more mature weeds.
Ty for sharing all your great ideas
It's our pleasure Peter, thank you for watching my friend. Have a fantastic evening. mad Mike the hammer SPC
brillant! Way to go Julio...
Thank you very much Brian! We appreciate the view and comment. Hope you have a fantastic day my friend. mad Mike the hammer SPC
Thanks for the great video!! I have just one question: What is this thing called Blaster? Sorry, wrong question. My real question is: Is this spray just for surface rust? Ok one more question: Should the rusty area be hit with a wire brush to remove scale and/or paint bubbles to allow the fluid to reach all areas? Thanks in advance for your responses. Thanks for making great instructional videos!!
You answered your own question, perfectly, yes, it needs to be touching the rust, so a wire brush is an excellent way to remove those scales/bubbles. Thank you so much for watching, we appreciate it. Hope you have a great evening my friend. mad Mike the hammer SPC
I have been using ATF allot. I will try your trick out. I have also used chainsaw bar oil. I found the chainsaw bar oil to stick well.
Thanks for watching and sharing Robio! Hope you have a fantastic day my friend. mad Mike the hammer SPC
So easy to mix it..full with instructions..but I'm still searching the ingredient to make one..tqvm for sharing mate..hope more useful videos for helping a lot of people like me(poor)😂😂
Our pleasure Spozz! Thank you so much for watching and sharing, we truly appreciate it my friend. Hope you have a fantastic day. mad Mike the hammer SPC
Lol what I seriously thought you were missing part of a finger in a different video the other day. Got me.
LOL, no, I still have all of them in tact :) Thanks for watching Nic, we appreciate it, have a great week my friend. mad Mike the hammer SPC
Gracias for your diligence Hoolio with an H !!
Our pleasure! Thank you for watching my friend. Have a great day. mad Mike the hammer SPC and Hoolio too :)
You mean Julio?......Hoolio is not a name....so is Whoolio lol.
Those Harrison spray bottles work good.
We agree with you utuber! Thanks for watching. Have a great day. mad Mike the hammer SPC
FANTASTIC INFO! 👏👏👏
Thank you very much my friend we appreciate that, mad Mike the hammer SPC
This is terrific!
Glad you liked it my friend! Thank you for watching and sharing, have a great weekend. mad Mike the hammer SPC
When I was a kid somebody told me how they did it back then. Way back then. They would use a sprayer and spray the entire under carriage with transmission fluid. And then drive down a Dusty Clay Road. Really fast. And that would coat all of the transmission fluid and hold it in place. Poorman rustproofing right there
Thank you for watching and sharing, have a great day. mad Mike the hammer SPC
I heard something similar to this works well to loose rusty bolts. Use 50% real acetone and 50% ATF (automatic trans fluid)
Thank you for watching and sharing, we appreciate it my friend. Have a great day. mad Mike the hammer SPC
It is great. Only thing is the acetone will evaporate if not in a sealed container. Best penetrating fluid that I have found.
Man that new fastback is nice, props.
Thanks we appreciate that. Have a great evening, and thank you for watching. mad Mike the hammer SPC
No kidding, he got right to the point , gave us the ratio of products and it was only 1/4 way over. I stuck around to see what else he had for me, this was painless unlike most that drag it out. Nice job!
Thanks, came back to get the amounts.
Glad we could help, Charles! Thank you for watching and sharing, have a great day and all the best on your project my friend. mad Mike the hammer SPC
Great mix. Went back through vid and got exact mix. Confused about only one thing, when you mixed it up you ended up with 1/2 of a bottle. Then on the rear bumper of Zilla, you had a bottle that was full. Since I didn’t see a ton of bubbles in it I’m assuming you didn’t top it off with water. Did you just double all of the original mix you quoted to get a full spray bottle?
You are correct! You can mix up a whole batch of this concoction if you want to :) Thank you for watching my friend, we appreciate it! Hope your day is the best. mad Mike the hammer SPC
I made some using your formula and it works great. I’ve had a spray bottle on my shelf for about three mounts and I’ve noticed the blaster seem to form a sludge like material at the bottom. Sometimes if I shake it really hard some of it will remix partially.
Have you experienced any thing like that.
Thanks
Excellent video.
Hello Jim, just shake it up good before you use it, everything will be ok. Also, try to use up what you mix within a couple of weeks as the shelf life isn't very good. Thanks for watching, have a great day my friend. mad Mike the hammer SPC
It's the dawn that does that just take out the clumps and and fresh dawn
@@mannysoto7643 thanks!
This is great. Just subscribed
Awesome! Welcome aboard Chris, we really appreciate the view and sub, hope you have a great day. mad Mike the hammer SPC
I think the Sierra Club in Californication will have you shot on site! They are a little extreme about placing the object on 3 layers of 6 mil plastic, capturing and bagging twice, gooseneck the bags, mark “Hazardous Waste” and paying $180 per bag to have burned. Great stuff. I use rendered tallow with dawn and thin with boiled linseed oil. It’s organic!
CA is not for us, FL is the Freedom state :) Thank you for watching and sharing Dean, hope you have a fantastic day my friend. mad Mike the hammer SPC
@@SweetProjectCars I am sure they will go bankrupt and ask the US to pay them our taxes!
Shortly, I hope they slide into the sea, after we get all the good old steel vehicles out!! 😆
Mike I am tired of winter here in Canada ,it makes even simple tasks a pain.As i have said before I have painted Timberjack, Skyjacks,John Deere,Caterpillar.I wish I could be there to help you my friend,for all you have taught me it would be a honour.
Thank you so much David! We would welcome you here in Florida my friend. The sun is out and it's a beautiful day today :) Take care. mad Mike the hammer SPC
Dawn is so awesome! This is just amazing to me. I have a rusty bathroom sink that has these little annoying spots that keep popping up and now I know exactly how to kill the rust and banish it for good! Thank you!!!
Absolutely Trish! Thank you for watching and for your comment my friend. Hope you have a fantastic day. mad Mike the hammer SPC
"And it softens hands while you do the dishes" 😁
This may be a dumb question, but what is the ingredient "blaster"? Great video, I have lots of projects to use this on!
@@frankfell6737 PB Blaster (loosen bolts)
What is the blast er
Really good information
Glad it was helpful! Thanks so much for watching and sharing Jeffery, we appreciate it my friend. Hope you have a great day. mad Mike the hammer SPC
Thanks for the video I just did on my f150 under the truck corners bumper
Good job! Thank you for watching and sharing, we really appreciate it, have a great day my friend. mad Mike the hammer SPC
Thank you. What is Blaster? Is it a brand name? I need to use this on my brothers Chevy truck . Its sat for years and only start the engine time to time to keep it new. Yes its a 350 out of a z camero 69 I did see that the engine that came out is a large nickel block. I never seen one until the rebuild.
Now, I want to protect the body..of the truck. So thank you very much.
It's this amzn.to/2OTeLYF Thank you for watching and sharing, we really appreciate it! Hope you have a great day my friend. mad Mike the hammer SPC
You’re talking, I’m staring at the snake.
LOL, this made us laugh this morning :) HA! He's a good conversation piece for sure. Thanks for watching (the snake) and being here with us Kirk. Hope you have a great day. mad Mike the hammer SPC
I use a hand pump sprayer like that used for insecticide. $20 on Amazon. Great video. You remind me of me.
That is awesome! Thank you for watching and sharing, hope you have a great day my friend. mad Mike the hammer SPC
like 5 glon weed sprayer?
@@jacobgreen6939 2 gallon
@@speakbigtruth9383 thx
Thanks!
Well done...! Thank you!
Our pleasure! Thank you for watching and commenting, we really appreciate it. Have a fantastic day. mad Mike the hammer SPC
I can see how this mixture would be good at stopping rust, although I would Never use this concoction on anything I wanted to paint. Even if you could pressure wash off, there are bound to be areas that if this were not completely removed, your paint would not adhere to the surface.
That's why you paint first, Rickey! Thanks for watching, have a great day. mad Mike the hammer SPC
And why is that Rickey? Most automotive paint is oil based, I know you wouldn't want wd40 anywhere near but I'm not sure about pb blaster.
*A follow-up in a year or so would be greatly appreciated.*
We will await your video results! Thanks for watching. mad Mike the hammer SPC
@@SweetProjectCars No. I was hoping YOU would post a follow-up video in a year or so showing how well your rust killer held up.
If this works so well how did it get that bad in the first place? Any follow up video? Thanks in advance!
Watching your channel from Alaska going to make up a bottle of this stuff.
Awesome! Thanks for watching and being here with us from Alaska! Hope you have a great weekend. mad Mike the hammer SPC
Ah, you have already answered the questions from one of your previous subscribers........just looked.....he (she) also from Ireland....interesting..
Bill Thanks
Great to hear, Bill! Thank you for watching and commenting. Hope you have a fantastic day. mad Mike the hammer SPC
Dawn has glycerine in it which causes it to stick. Check out using chain bar oil for the same thing, that is put on with a brush or squirted. Also Dot 5 Brake fluid has a rust inhibitor it is silicone-based as does all modern brake fluid collects the moisture in the air and keeps it away from metals.
Thank you for watching and sharing Michael, have a great day. mad Mike the hammer SPC
But brake fluid is flammable though.
Transmission fluid, acetone, 50 50 mix. The Dawn? Never thought of that. Helps the Rust Buster stick too the metal. Rock salt, dishwashing soap, sprayed on grass kills it. Cheaper than Weed Be Gone
Thank You for sharing my friend
Funny thing you may like to investigate - My truck had leaf springs 20+ years old that were covered in Lime. Looked like putty or mud, but was almost white. I scraped all that off and the steel was perfect underneath and could still read the stamped part numbers on them. So does limewash prevent rust?
Love your videos and watch all of them. For the rust proofing with the dawn, what is the Blaster you refer to? Is it one of your concoctions.? if anyone knows what's in it would you let me know? Thank you.
It's this amzn.to/2OTeLYF Thanks for watching and asking Bill, and just a reminder, all of the products/tools we use in our videos can always be found in the SHOW MORE of the videos description, if you can't find it let us know and we will help you. mad Mike the hammer SPC
Well I'm totally embarrassed! Turns out Canadian Tire carries PB Blaster. It's similar to WD-40. I tried it on my truck and cars various squeaks and noises, even grinding sounds Etc., and they immediately disappeared. So when it comes to making the rust proofing, it simply consists of transmission fluid, Dawn dishwashing liquid , and PB Blaster. And the blaster sold for Less than WD-40! I'm hooked on it. they also have a lubricant I'm going to try.
How does it dry, does it stay tacky and pick up dirt over time? I’m wondering if I could use this instead of cosmoline as a winter undercoat.
You sure can use it, it's the best stuff you will ever use I promise, it will outdo anything on the market. It doesn't do anything like stay tacky and pick up dirt, we only put out videos that really do work, hence our 700 videos. Thanks for watching and asking Kevin, we appreciate it. Have a great evening. mad Mike the hammer SPC
One of the best rust killers is MOLASSES. Takes time though, but never damages paint or metal.
You can use whatever you want to use, but the last thing I would want to use is something that's going to attract insects and ants. And btw, we have never had this mixture damage paint or metal after years and years of use. Thanks. mad Mike the hammer SPC
Thanks for this video
Glad to help Shermette! Thank you for watching and commenting, hope you have a great week my friend. mad Mike the hammer SPC