Car or Truck Door Locks Not Working - Replacing Door Lock Actuator - 07-13 Toyota Tundra
Vložit
- čas přidán 11. 06. 2019
- I've installed several door lock actuators now and I've learned several things along the way. I also spoke with some professionals to get some tips and tricks. All of that information is shared in this video. There is definitely a wrong and a right way to install a door lock actuator. I highly suggest you do not purchase an aftermarket actuator. They are known to have issues. Brand new actuators can be very pricey but you have a great option on eBay.
This video is sponsored by Actuators Plus (eBay). They sell OEM actuators with an optional lifetime warranty. All you have to do is return your faulty actuator in their pre-labelled shipping envelope and your lifetime warranty will be activated.
www.ebay.com/str/Actuators-Plus
*Actuators Plus did provide the actuator for this installation video free of charge *
Symptoms of a bad actuator:
1. A door will not lock or unlock using your power locks button in your vehicle
2. Your remote will no longer allow you to lock or unlock the doors of your vehicle. - Auta a dopravní prostředky
I’ve had this part for about a year but have been putting it off. With your help it went way easier than expected. Many thanks my friend.
That’s great to hear!
Same here🎉
This video was very helpful! I fixed my door in no time at all. The tip about the rod going through the mechanism as well as the door lock fitting in the cross was the best and probably something I would have overlooked! Thanks!
That’s the reason I made the video! No others showed that step when I was looking.
Your teaching is so detailed and easy to follow. Super impressive! Awesome job!
Glad it was helpful!
All these years later and everything is still the same. Just replaced both of mine and your video was gold! Thanks!
Glad it helped!
BY FAR the most comprehensive and well explained video for this I have ever seen! Can't thank you enough for this! I wish I could like it 100 times. Thank you!
My brother, you saved my life!!!! This is the second time I've paid to get these actuators changed, and now for the third time you taught me to do it my self and it worked. IT WORKED!!!! Thank you so much! This time, the only expense was the part itself. THANK YOU X1000!!!
My pleasure. Hopefully you got a good quality actuator this time so you don’t have to do it again.
Thank you so much for posting this video. It made it possible for me to replace both driver and passenger side door lock actuators today. The best tutorial for this job hands down!
2014 Tundra
Bravo!! This is how a "How To" video is supposed to look. Very detailed and instructional. Thank you very much!
Thanks for the kind compliment! I’m a teacher by trade so I like to think I provide clear instructions. I have several other videos for this truck so be sure to subscribe.
Hey brother....took two tries but got it done. Your instructions were very clear and helped me out on my Sequoia. THANK YOU.
That’s great! I’m glad you got it done. It’s tedious process and you need to follow it step by step!
Thank you so much. Step by step instructions work exactly for a 2019 Tundra CrewMax. I appreciate you taking the time to help others. You saved me $650 at the shop to replace one actuator! Ditto other comments regarding the rod mechanism and the door lock fitting. Invaluable.
Great step by step directions worked perfectly for me. Thanks
I’m glad it worked for you too!
Thank you for such a well made video! Saved me from paying a mechanic.
That’s great! I’m glad the video gave you the confidence to get it done! I have several videos for the Tundra so be sure to subscribe.
This video was great. After I found it I ordered from actuators plus. The actuators came fast and I was able to install 3 actuators on my truck with little difficulty.
That’s great news!
Thank you so much for this video and link to Actuators Plus. I changed my passenger door out in about 45 minutes and thanks to your tips, had no issues. Thank you again!
That’s great!
Excellent tutorial. BRAVO! Thank you for the door latch trick. I would have surely made that one major mistake. Also mine is the driver's door so I would have missed that lock screw too. Very good. I've watched at least a dozen tutorials on this and they all missed the big stuff. Always greatful. Also bought an actuator from your guy. I've been using the door key for almost two years. Thank you.
I appreciate it. I’m glad it helped you out. I decided to make the video because others left some of the harder parts out. I have several videos for this truck to make sure to subscribe.
Worked perfectly! Very thorough video. Thanks a lot!
You're welcome!
Outstanding video!! I was able to replace mine for the first time in about 2x the time it took me to watch the video. I have now become a subscriber.
Thanks again!
That’s great! Im glad it worked for you too! Thanks for the sub.
Just did this a minute ago and I gotta say thanks for the informational video now all my locks work !!!
Great to hear!
Thanks! Saved me a lot of money and time. I've never removed a door panel or replaced a door actuator before. Felt good. One area where I messed up was not securing the green cable as far down as it would go in the door. I would open the door once and then it wouldn't work anymore because the cable kept slipping out of its holder. I used an aftermarket actuator because the OEM's are only lasting me about 2-3 years. This is the third set of actuators on this 2013 Sequoia Platinum. Total parts were just under $100 for driver and passenger doors on the front.
Clint Carter Hopefully you have your issue fixed now. I tried an aftermarket from Rock Auto but the latch part didn’t fit properly so I sent it back. That’s why I went with a refurbished OEM. I haven’t had an issue on any of the three I replaced so far.
Thanks for taking the time to show how to fix it. I have the same problem with my tundra 2007 and you just helped me saving hundreds dollars 🙏
Great! I’ve had to replace 3 of the 4 on my truck. Haven’t had any issues since.
My goodness this video was perfect. Exactly what I needed.
It’s my pleasure. I couldn’t find another video showing the full process. I thought I’d make my own.
Thank you for the video. Watch your video several times that it took me less than an hour to complete. Dealership wanted almost $500 for that service. Great job and thank you.
You are welcome. That’s a lot of saved money! I’m glad you found it helpful. I couldn’t find a video showing the whole process so that’s why I recorded this one. I have several other videos for this truck too so make sure you subscribe.
You the man tightwad. Just had to do the driver side on a Lexus GS350. Thanks for showing key tumbler step. Actuator plus should give you a cut of the action
Exceptional video! Changed out the passenger door actuator in my 2007 Tundra. Not long after, my driver side started acting up so I replaced that one as well.
I’m glad you found the video. It’s a tedious process for sure!
Video helped a ton. Ran through everything I needed to do
I’m glad you found it helpful.
Thanks for the great video, I followed your thorough instructions and completed the actuator replacement in far less time than I expected.
I’m glad you found it helpful. When I struggled with my first one I knew I needed to make a video for others. I have a lot of videos for this truck so he sure to subscribe.
How long
Was your part around 25$-60$
@@lovebarbie3589 45 minutes
Perfect! Both driver and front passenger locks have this same symptoms on a 2010 Tundra. Thanks so much!
Yes sir. It seems to be an issue with most Tundras.
Huge thank you for the video! I got the actuator on E-Bay, and your video made for a smooth install. Great stuff.
That’s great news!
Great step by step video. As my actuator just went out and had to replace!thank you.
I hope you’re able to get it fixed.
@@TightWadDIY with this video i was able to complete my replacement pretty quickly. Thanks again. Did have to loosen that window railing to get the actuator out.
Changed out the front right and left actuators on 07 tundra.
Excellent video and thanks for the actuatorplus tip.
Great! I haven’t had any additional trouble with mine!
Excellent video just did my 2018 Tundra using this only difference was the door handle wiring single plug instead of two. Thank you very much.
Good to know!
Very, VERY well presented and articulated!!! I just bought my son a 2010 Tundra & the passenger side door actuator needs replacing. I’m gonna use your vid as my tutorial.
Btw your name cracks me up!!!
Great video! Just knocked it out in an hr. I did almost forget to bolt the window rail back in place. Thank you!
Glad the video helped you out!
Great video! I would have never never attempted this without it. Thanks
That’s great to hear! I’m glad this gave your the confidence to fix yours.
Thank you🙌🏾🙌🏾🙌🏾🙌🏾✊🏾✊🏾✊🏾✊🏾✊🏾!!!! Saved me a ton of cash. Wife and I replaced it tonight. Best tutorial ever!
Yes! I’m glad it worked for you too! Thanks for the kind compliment. Please consider subscribing.
Great video. I followed along with my replacement and all went well!!!
My pleasure! I’m glad you found it helpful.
Very clear and helpful tutorial! Toyota actuators seem to be junk if my experience is typical. I replaced two actuators on my 2015 Lexus RX 350 yesterday and I have two more to replace on my 2012 Tundra.
Yeah I’v replaced three of the four on this truck.
This was really helpful. Replaced one today. Thank you!
I’m glad it worked for you too!
Man!! you just did exactly what I have to do. Just perfect bro
I couldn’t find a great video for it so that’s why I made this one. Let me know how it goes.
Just replaced to front door lock actuators on my 2014 Tundra thanks to your video! It was relatively easy. I did get my new actuators from Actuators Plus and I am very impressed! They included a postage paid return envelope for my faulty actuators. I am so grateful for your great post! My only hiccups were not knowing how to reconnect the drivers door electrical connector, and forgetting to bolt the passenger side window track before replacing the door panel, ugh. The whole job, including the hiccups took about an hour. I would encourage almost anyone to do this job before having a shop do it. If anyone knows of a video tutorial on all the Toyota electrical connectors and how they work please send me the link. Thanks again!
That’s great! I’m glad to hear you were able to get yours done too!
Great video. You made this job so easy. Thanks.
Thanks for letting me know. I couldn’t find a great video for it so I knew I needed to make one.
excellent video , helped me do all 4 doors I less than 3 hours with no issues , also like the price and service of the actuators plus , thank you again
That’s awesome! I’m glad you were able to get it done easily! I’ve done three of my four. They are a great company. I love OEM parts so their service is a no brainer.
Video was spot on. Great instructions!!
I’m glad it worked for you too!
Very well put together video.
This video was excelent, and helpful , I fix my sequoia 2008 step by step and I did it!!! 👏🏼👏🏼👏🏼👏🏼
Glad it helped!
Great video. I've been dreading replacing the small motor and after seeing your video, ordered the actuator and 30 min install because of your clear instructions. My lock works now and I avoided the shutting my door and not being able to open it up pitfall thanks to your instructions. :-)
I contemplated replacing the motor too but I’m so glad I didn’t!
@@TightWadDIY My wife couldn't believe how fast I did this project, very successful and I only broke one clip which I had purchased from a year ago when I was going to do the motor replacement. :-) Much thanks!
@@kbroomfield7528 it’s always nice to impress the wife while saving money! 👊🏼
Thanks so much! Saved me a good amount! Excellent video.
You’re welcome. I’m glad you found it helpful. Be sure to subscribe. I have several videos for the Tundra.
This worked perfectly for my 2017 Sequoia
I’m glad to hear it worked for you too
Thanks, brother! Super helpful!
My pleasure. I have several videos for this truck.
you saved me a lot of money thank you again
56nawal You are welcome. Did you get yours replaced yet?
He is very right on making sure that metal rod is in place 😂...what a pain in the ass to get the door open. Luckily a 3ft rod from Homedepot with a hook bent on the end and an endoscope taped to the rod. I was able to fish the makeshift rod through the window switch panel hole and somehow hook the lever opening the door. Took about an hour of fishing around and bending the rod but I can't imagine what a mechanic would have charge me!! Less learn watch the whole video!! Haha
That’s a great idea for anyone else in that situation. I’m sure you were quite frustrated.
Great an very helpful tutorial sir. Thank you
My pleasure!
Great Video- thank you!
My pleasure!
Great video!
Thanks! I hope it helped you out!
Thank you soo much this helped a lot
Glad it helped!
You had the answer as to why I could not unlock my door with the key. Thank you
Were you able to get it fixed?
Very good informative video
So nice of you
Thanks!
Thank you
VERY thorough instructions. I am glad I came across your video. My husband followed it precisely and now I don't have to use the long handle of the squeegee to lock/unlock the passenger door. YAY!!!!! If you don't already have a 2015 Rav4, please purchase one, so you can teach him how to fix anything that may go wrong. Subscribing to you now!
It’s a tedious process. I’m glad you found the video and we’re able to get yours fixed too.
Thank you!
You’re welcome!
That's how training videos should be.
Thanks!
Thanks! That’s actually why I started the channel several years ago. There were too many videos with good content but poor instructions.
just watched your video as I'm getting ready to do mine. one question, could you test the manual outside handle before getting everything in place...just to double-check that it was installed correctly?
very good
Unusual situation - my key would turn the lock, but no result. 2012 Tundra. I was ready to remove the lock assembly, until I saw your tip about the key assembly. I took that apart, seemed fine, reassembled just the key lock. Works fine. And it feels different. It now has a solid feel to the actuators. Wonder if it was not seated in the nylon star in the door? Anyway, great tips well done - and you just saved me a buttload of work. Thank you.
It’s odd that it would have lost connection but glad you figured it out.
Awesome!!!
Thanks!
Outstanding Video - Thank you so much. I did the drivers side front door on my 2014 Tundra, all went smoothly. I had watched another video when doing my rear passenger side door and never put the metal bar back in. The door is now shut but it cant be opened from inside or out. BIG MISTAKE working on how to remedy this since it is nearly impossible to pull the door skin with the door closed. If any one has a suggestion - I'm all ears. If I find a way, I'll post it
I’m glad you found the video helpful. I’m really not sure how to get the door open. Maybe ask a local mechanic if they have any ideas.
Found out the hard way that my key didnt work after replacing actuator. Thanks for the video!
What made the key not work?
@@TightWadDIY I never loosen the torx screw and repositioned the piece back in
@@johngillings2102 ahhh.. were you able to get it fixed?
@@TightWadDIY absolutely! Thanks again
Thank you so much for your videos.. I just have one question when you replace the door lock actuator.. can you use the old key bop.. mine's not working.
Appreciate your help, thank you,
Lucille
Yes. Are you sure you got the rod with the star on the end from the outside handle in the correct way? You aren’t changing anything except the motor really. It has no impact on the keys.
Would I have to do anything to my fob for the doors to unlock/lock when the actuator is replaced or is it good to go after installment?
On my 2015 Sequoia the Left driver door locks and unlocks with remote just not with physical key in the door lock, what could be the issue? I looked with a boor camera to make sure that cross you make reference to in your video is turning left and right, is there additional linkage going down to the lock actuator from the lock cross?
One of my rear locks won’t “lock” when I use the key fob. It unlocks no problem. When I move the lock switch manually I can unlock and lock also. Do you think the actuator is going bad in my instance?
Question!!!!
What if my door is shut and I can't open it? I know for sure it's everything in this video that I have to do but the part with the bar with tight space is what's loose or off and now I can't get my back driver side door open???
Makes me want to be a mechanic!
Haha! Makes me appreciate mechanics!
Is this the same procedure for the rear doors? I have a rear passenger door that has a door lock issue. Great video! Thanks.
Yes. It’s very similar.
Great tutorial. I removed and replaced. I order part from Actuators plus as recommended but I had same issue. Either they sent me a part that they did not repair or I have a different issue what do you think.
I would reach out to Actuators Plus. He was very responsive and knowledgeable when I emailed him.
Thanks for your video i have one question you think that a Toyota tundra 2005 it maybe the same process or not
It should be similar but know some parts will vary.
Awesome video, wish I would have found it before I did the job. I missed the back rod, and my door is now sick shut. Not clue what to do.
Thanks. I’m really not sure how to fix that. You may have to call an auto repair shop. Maybe a body shop.
@@TightWadDIY I emailed actuatorsplus, who I bought the actuator from, and he gave me some advice. You can get it with a rod(thick wire hanger) going down the window slot, but it is tedious, and frustrating.
@@brentleedy79 I hope you are able to get it. Glad he offered some advice!
2015 Toyota Tundra do you know the model number mine is having the same issue
Great video!
Question, my door will always lock. But very rarely unlock. Is that the same issue as described in this video?
Thank you
It could be. I’m not positive though.
Thank you. Very interesting! But it is way over my head. (Is it a good idea to find an actuator at an auto "grave yard" where they sell parts that you pull from the old cars yourself? My son's got problems with a car window and is thinking of getting the part that way.)
mourningwarbler That is a good way to find affordable parts. The only issue is they don’t typically come with warranty. The actuator wouldn’t be the part he needs if his windows don’t work. It only controls the locks.
@@TightWadDIY I know. Thanks!
If you're door won't open on either side roll down the window take the window trim off of the exterior the trim that has the filt facing inside that will give you a bigger gap to look down the door with your light i took a carbin fiber cleaning rod push down the actuator handle down open the door
That’s a great tip! Thanks.
Very frustrated.... your video was great. My 2011 crew max is having issues... The drivers door is the only one that works with my drivers switch. The key fab does the same thing. I just changed my rear drivers actuator out... still not working... Any tips???
Are you sure you installed it properly? The first one I bought from RockAuto didn’t work.
Greetings TightWadDIY, I have a problem that the manual door lock moves freely... I can press the power locks to lock the door, but the manual lock button simply rocks back and forth... Any suggestions?
One of the cables shown here (green and white) could have come loose.
Great video, I did get the parts from Actuator plus and will replace my actuator this weekend. I have a question? When I unlock my doors only the driver side works and the other 3 doors wont unlock, and if unlock it from the driver side by pressing the button to unlock only the driver side unlocks. does that mean I need to replace the actuators from the back doors too? I would appreciate any comments
It does sound like your actuators may be bad on all of the doors that aren’t unlocking. Did they all start this at the same time though?
@@TightWadDIY I did replaced the actuator and it worked a OK, all the doors were unlocking but few days after it stop working, so I am wondering if the locking and unlocking switch is bad as well? I went ahead an order a switch for my passenger door and we will see. I hope that is the problem!
@@abdiarguello8881 That’s the only other thing I can think it might be.
Great video thanks , I have a question , what happens when changing the driver door actuator and locking it, I try opening my door and it opens , even tho the locks work my handle opens the truck ! Would it be a bad actuator ?
Are you sure the locks are actually locking or are they locking and unlocking really quickly?
@@TightWadDIY they are locking correctly same speed all of them, just the driving door opens as soon as I pulled my door handle, lock or unlock still opens
I’ve got a 2011 tundra and just recently my power door locks only engages 21:33 the driver’s door. There used to be a slight delay and the other 3 doors would lock or unlock. Would one actuator fix this or do I have to replace all of them
Each lock is typically independent. I’ve replaced 3 of my four actuators but all at different times.
Got an ‘07 Tundra. The driver side door handle won’t open the door from the outside. You can open it from the inside but not outside. The door handle will also not retract back, almost like it has lost whatever tensioner it was connected to. Dealership said it was the door handle that’s broken but I don’t think it is. I tried to install a new handle and it was doing the same thing. Any tips?
I’m really not sure. I assume there is a cable that should be attached that provides the tension.
I've replaced both front actuators using CZcams , but now I need to replace the rear door lock actuator on my 2012 CrewMax. Do you know if there is anything different in the process? I can't find a video specific for the rear doors on a 2007 to 2013 Tundra.
It’s similar. If you’ve done the front, you can do the rear pretty easily. I’ve done one of mine.
@@TightWadDIY Thanks
If I want to fix the rear door would it be the same? Because the doors don’t have the same lock as the front one. I’m talking about Mazda Lantis 2004.
Thank you!
It’s similar but doesn’t have the piece with the cross.
Thank you so much
Help. I have a 2008 nissan altima rear passenger door is locked up due to low temperatures. Actuator burned out. Can't unlock. It's locked at locked. Took it to my mechanic. Was told had to take it to a body shop. Is it possible to replace the actuator without damaging the door or car? If this happen before on nissans? Thank you. Any information helps.
Sorry this happened. I’m not sure how to get to it without being able to open the door.
Do you have ideas as to why the door will open from the outside but not the the inside handle? Thank you again.
It sounds like one of your cables is disengaged or broken.
@@TightWadDIY thanks for the reply. I went back and checked all the cables. They were still connected. I took the new one off and returned it auto zone. It was $277 and didn’t work. Ordered from the eBay store you suggested and saved over $200 more dollars. Only issue I have now is I cross threaded the screw to reset the key lock. It is holding now with some lock tight. Thank you so much. I also did the toothpaste headlight restore last night.
@@8u2b You could try using a tap to rethread for that screw if the loctite fails. I always recommend using OEM parts when available. I also started with an actuator from RockAuto and it was close but not an exact match so I returned it prior to finding Actuators Plus. I’ve now replaced all four of my actuators using their parts and have had zero issues.
@@TightWadDIY got the new to me one installed and everything is working great. Took me probably 30 minutes this time around. Thank you sir!!
@@8u2b The second time is much easier for sure!
Have you ever tried replacing Serpentine Belt, Tensioner Pulley, & Idler Pulley on said truck?
I replaced the serpentine belt but haven’t uploaded the video yet. Didn’t replace any pulleys.
@@TightWadDIY Can not wait to see the video! It is my next project.
Would this also work on a 2010 Jeep Liberty? I'm about to take the plunge as I cannot afford the $500 bill a mechanic wants!
It’s the same concept but Obviously not exact.
Is the 2013 Toyota Sequoia the same setup as the your Tundra?
Should be. I think it was 07-13.
@@TightWadDIY Thanks
What’s the different between that and the door lock motor?
It’s all the same system.
My doors are not locking with remote or on door switches. They will unlock with remote and switches. Doors will not lock when speed is reached but will unlock when placed in park. Am I understanding correctly that both driver and passenger actuators have failed at the same time?
Interesting. I’d try just one first to see if that is your issue.
I'm waiting for the delivery of the driver's door actuator. I'm not convinced that is the issue but I'll let you know.@@TightWadDIY
I went to my dealership, and they said it's going to take 3 weeks for them to even look at my door! I have a Ford Fusion and my front door does not stay closed. Do you think it's because of this issue?
It could be related to the same part. Does the part on the actuator flip down when you push on it?
Do you have the link from eBay ?
Is the one in the description working? Here it is: www.ebay.com/str/Actuators-Plus
what if it’s all four doors? cause i can’t even lock and unlock with my key fob! even tried to reprogram it but still not working so imma get it looked at tomorrow not toyota probably Monday if the place i go can’t fix it
Could be the fob or a fuse.
@@TightWadDIY yah cause i tried reprogramming the fob n it still didn’t work even got a new battery for the fob