Rusty Coal Iron (1914) Restoration 🛠
Vložit
- čas přidán 18. 02. 2023
- An old rusty coal Iron from 1914 has to be restored.
Removing rust, polishing, sand blasting, woodwork and more.
All this fine handwork you will see in 4k.
If you are interested in restoration videos, handcrafting and woodworking, please subscribe this channel.
So you will never miss a new exciting video.
The puppy in this video is "SAM". 🐶
He is 20 weeks old and is a half-breed of two english and hungarian huntig dogs.
If you want to hug him... I will do for you. Just give a like and I know what to do😃
You will see him in all of my videos.
The seller of the Iron told me it was from 1914.
I don´t know if it is the thruth. I could not check it.
Following you can have a look to the tools and equipment I use:
Amazing Reusable Cable Ties:
In Europe: amzn.to/3VSqjbR
In America: bit.ly/3XVfCHr
Metal Cold Weld Mass :
In Europe: amzn.to/3Sbki9n
Heat Resistant Color Spray:
In Europe: amzn.to/3IAJLWy
Welding Maschine STAHLWERK:
In Europe: amzn.to/3XKDuMi
4K Film Camera I use:
In Europe: amzn.to/3VCGFp8
In America: bit.ly/3h729M4
Light I use:
In Europe: amzn.to/3BBhawL
In America: bit.ly/3XY4Kbz
If you use the link to buy I get a small reward.
The price for you is the same with or without the link.
Thank you so much for your support :) - Zábava
Again, quality craftsmanship . I'm never disappointed in your channel.
Thank you so much Peter 😀👍
Nice job well done. As it was your first welding project I am proud of you. About tips .. when you want to weld cast iron first preheat the work second tip use lower power (I noticed the work was melting) . Good luck 👍👍👍👍
Thank you so much my friend! I have to learn a lot of welding. But for the first time it was Ok I think. In the video you can only see the welding that has worked. All failures are not shown 😅 Thank you for watching my videos 😀👍
This is an antique chimney iron from the brand licsa, in the city of Elorrio in Spain. Great Job! I admire your perseverance to achieve a really good result.
Wow! This is great! I did not know. I am glad that you like the vido and write a comment. Thank you so much!😀👍
You have done a good job and from what I have seen on CZcams it is good to heat up the iron before you weld it. I am not sure what temperature, but a slight redness in the iron should be good.
Thank you for your comment! Yes I think you are right. I should have heaten the iron before welding. I still learn but this I will do next time. Thank you for watching my videos! 😀👍
Also a tip when cutting (making) threads that will help you a lot. You need oil to keep it from breaking and to cut the threads easier. 3-in-1 oil or actual oil made for using a tap and die.
Sounds good! I will try it next time😀👍
😅first time welding and you pick cast iron and stainless to start with...we all know you set the bar high, but that's just crazy lol. Great job! welding looks easier than it really is and I think you did pretty darn good.
😃 Hi! Thank you so much for your comment👍 Welding was not easy at the first time. But I will practice and hope some day I am not so stupid anymore 😂 Greetings to you from Germany 🖐
@@bestrestorechannel we all start somewhere :) I suggest practicing on rebar. It's cheap and will give you good practice on flat areas, curves, and bumps. That's how I learned, trial & error all the way!
😀👍
9:53 talk about a sad iron yes, jeez, also as a tip preheat cast iron before welding to avoid cracks later on, as for pin hole cracks like that one on the chimney spout thing you want it down quite low voltage so it does not burn through, there is plenty of videos about the basics of welding. Im no welder but once i do i should be able to pick it up quickly, me preferably i like plasma welding or brazing, less violent.
Thanks for the tip. I'll take that into account next time! 👍😃
I liked this channel. Cool to restore rusty things. 🙂
It would be a good idea to dim or fade the screen on the movie while welding for the sake of people with epilepsy, I think. 🤔
That is true. I will do it in the next Videos 🙂
A beautiful job well done sir nicely restored it looks awesome 👍👍👍👍💯💯💯
Thank you so much for your kind comment 🙂
Preheat the cast iron to around 600 degrees F. I prefer nickel welding rods, but stainless steel is fine, too.
Thank you! I learned to preheat the cast iron. Next time welding will be better i promise. I am happy that you Watch my Videos! Greatings from Germany 😀👍
Buddy having never welded before you did a good job, the thing is you were willing to try. We learn from experience and I am sure as time goes on you will become more efficient at it. Over all I think you did an outstanding job on restoration of this old iron.
Hello! Thank you so much for your comment and your kind words 😀 I am happy about this. Every day i learn and next time welding will be better i promise. 👍 I send you greatings from Germany 🙂🤝
Esta restauración es bellísima, esta plancha es sin igual.
La plancha de mi abuela era más sencilla pero igual se utilizaba el carbón.
¡Hola! Me alegra que te guste el hierro. 😀 Si en algún momento nos quedamos sin electricidad, todos volveremos a planchar con carbón. 😅 Te mando saludos desde Alemania!😉
Please put a welding tint filter on the camera lens - 😣, the footage gets washed-out by the arc = we are blinded by it and the camera’s sensor will be slowly damaged,
Thank you for this tip. I did not know that it can damage the camera. I will get a Filter for the camera. 🙂 Thank you for watching my Videos 😀👍
Esa gran paciencia y muy buen trabajo, se merece un like.
Thank you so much for your comment 😃
And for the LIKE 👍
I seen you had troubles in some areas especially the welding. But over all you did a good restoration job. Keep up the good work and learn from your mistakes then you will get much better.
Thank you so much my friend! I am happy that you enjoy the video 🙂 Greetings from Germany to however you are 😀👍
Wow, I do believe that Everyone is impressed. That is beautiful. Quite an awesome job you did their! Thank you so much for sharing.🎉😊👍🏼💐🙋🏼♀️🇨🇦
I thank you so much for your comment! I am glad that you like the video 😀👍 It is a difficult time now for my channel. Because i have so Less time to make videos. I hope and I promise to do more Videos in the next weeks. Thank you for subscribing 😀 Best greatings from Germany!
Is a little hot , put down the adjustments, preheat the material and use the rod welding for cast iron .
Thank you for your comment and Tips 😉👍
Wow, compared to some other guys that I’ve watched, you seem to know a bit more of what you’re doing. You even have a heck of a lot more tools I must subscribe thumbs up to you have a very nice evening.🙋🏼♀️🇨🇦🍀🍀🍀🍀
😀👍
I just saw a restored VW Bus driving through the local grocery chain parking lot today. It was in a type of green. Very cool.
VW Bus is an legend 😀👍
Two keys to filling a hole, especially with cast iron. Get amperage just above non-binding point. Too high and you make the hole larger as seen in video. Second start from the perimeter of the hole and work towards the center. If you start in the middle, again, you'll make the hole bigger. Also, have you considered electrolysis or at the very least a liquid rust remover before sandblasting? Overall, nice job. Cheers!
Hi! Thank you for your tips for welding. It was my first time welding... Please excuse🫣 I will learn and some day i will be a pro. I hope 😀
Trying welding for the first time "on the air" is a brave step. Let's hope you keep doing it and get to be great. Fun video.
Thank you for your comment 😀 Sometimes you have to switch of the brain and hope you do not ruin everything. Welding is not my favorit. But i am willing to learn 😉 Thank you for watching my video 😀👍
Obviously better than brand bloody new. Great job !
Thank you for this kind comment 😀👍
When is pretty tough like that to get off.. have you ever thought about spraying some oil on it to loosen it? I’m just offering you a suggestion that’s all it’s my first time here. I find it pretty interesting watching you restore whatever that item is.. Good luck. Have a nice day.
Oh yes, I did it several times with oil to loosen it. Sometimes it works, sometimes it does not work. But it is always worth a try. Thank you for your advice 👍🙂
Great job. I restored a similar iron, even did ironing
Thank you! I am happy that you like my videos 😀👍
Beautiful job as always.
Thank you 😀😀
Schweißen ist üben üben üben und nochmal üben. Wenn Du Dir nicht sicher bist ob die Stromstärke passt nimm erst ein Probestück wo Du es testest. Manchmal sind zuviele Unterlegscheiben zuviele Unterlegscheiben 🙂. Kürz doch einfach die Schraube . Aber ein tolles Ergebniss . sieht echt super aus. .
😀 Danke, ich werde mich ran halten was das schweißen betrifft. Es war ja auch eher Löcher stopfen als richtig schweißen. Ich werde weiter üben 👍Bei den Unterlegscheiben gebe ich dir recht. Ich habe überlegt die Schraube zu kürzen. War aber die einzige die ich in der Größe hatte und ich hatte muffen daß sie zu kurz wird. Und dann das Projekt noch länger dauert nur wegen der Schraube. Das Projekt hat 4 Wochen und ca. 70 Arbeitsstunden plus 20 Stunden Schneiden gebraucht. Ich hatte 900 GB Filmmaterial 🫣 Aber du hast recht... Sieht nicht gut aus mit den ganzen Unterlegscheiben. Aber funktioniert und ist auf der Innenseite.. Von daher. Toll daß du meine Videos schaust und auch was schreibst 😀👍
@@bestrestorechannel danke für deine Antwort. Und nebenbei, es gibt für jedes Material die passende Elektrode. Wow, das ist echt heftig viel arbeit gewesen. Wie gesagt , das Ergebniss kann sich sehen lassen. Mit einem Meßschieber kannst Du die Tiefe messen. Dann passt auch die Schraube und im Zweifel gild, lieber zweimal schneiden als einmal zu kurz.War auch nur als Tip gemeint nicht als Kritik. :-) LG
Ich habe gerade mit dem Arzt
Man kann nicht vorsichtig genug sein 😅👍
Good attempt but man, that welding :'( you need to get a mig welded for thin stuff and practice! Keep up the effort though 👍🏻
Thank you for your tip. I am an absolute beginner in welding. But i will practice 😉 Hope my skills will grow 😀👍 Did you guess the 3 movies?
@@bestrestorechannel No problem, gotta practice :) I did not :(
"I like the smell of rust (napalm) in the morning" - Apocalypse Now + "This is not a knife - THIS is a knife" Crocodile Dundee + "I am your father" - Star wars V
But dont tell the others...they should find out by themself 😀😋
Лайк поставлю за терпеливый труд.Но хочу заметить,сварочный аппарат не верно указывает ампераж.Второй момент,изделие(утюг)литое,железо слабо углеродистое,потому хрупкое.Соответственно диаметр электродов нужен меньше,чай не рельсы варишь))).
Спасибо за совет! Я все еще учусь. Я первый раз сварил. Надеюсь, мне скоро станет лучше. Большой привет! 🙂👍
And you say you never welded before ... I dn't believe it!
Hello my friend. 😀 Thanks for your comment. It's true. I've never welded before. In the video you only see the scenes that worked reasonably well. There's at least 30 minutes of welding left, which isn't shown in the video. Quite a lot went wrong there. 😏 Most of the time it just didn't weld even though the contact was there. But whatever. The main thing is that you liked the video. Best regards from Germany 🙂
Think of it as just a long rehearsal.
@@bestrestorechannel
Aweasome Work!
Well done❤😊
Thank you so much! 😀
cool das dass sogar am ende funktioniert 👍
Danke mein Freund! Ja, das Bügeleisen wird jetzt jeden Tag benutzt 😉👍
You did it well I think, keep it up 🤘🏻
Thank you so much 😀👍
Looks cool.👍
Thank you Bro! 👍😀
NICE JOB
Thank you! I am happy that you like my Video 😀👍
Your rust dust comment... I love the a Mell of napalm in the morning...
Yes, that is right too 😀👍 But 1 movies is missing. Tip: It has to do with a knife 😉
#3-Crocidile Dundee #2-Star Wars: Return of the Jedi #1-Stripes???
Hi my friend! Good observed. Star Wars and Crocodile Dundee are right. But Stripes is wrong. Sorry. Do you want to try another suggestion? Or should I tell you the 3. movie? I am happy that you like my video 😀
Great job and incredible at the same time. I would like to know: What do you do with the metal scraps or dust you colected in the cristal jar. Thank you so much!
Hi my friend! Thank you so much for honoring my video 😃 I collect the rust and other things because i think maybe some day I can use it. But until now I have no idea for what I will use it. But I guarantee: When it will be done, you will see it in a video 👍 Best regards from Germany 😃👍
I actually love reading manuals. I brought a drone recently and I read the manual about twice now. When things are engineered to very high tolerances, I find it interesting to read about them. Because I'm a nerd. 🤓
😅 Thank you for your interesting comment 👍 I am always impatient and want to start immediately. Reading the manual ist better I know. But it takes time...😃 In the end I sometimes regret not to have read the manual 😅 I am happy that you like my video! All the best for you and greatings from Germany 🇩🇪
Thanks. Much love and greetings from the USA 🇺🇸. God Bless and sorry about your pipeline. Lol 😅
Você trabalha bem um belo trabalho. 👏👏👏
Muito obrigado! Fico feliz que goste dos meus vídeos. Envio-lhe saudações da Alemanha. 😀
@@bestrestorechannel obrigado a você amigo
What an awesome restoration. You are a true master craftsman! Who is not afraid of trying new techniques in front of your audience.
Thank you so much for your kind words 😀👍 I am happy that you like the restoration. I send you greatings from Germany 😀
Perfeito 👌 lindo demais 👏👏👏👏👏👏👏
Obrigado pelo seu comentário! Fico feliz que você goste do vídeo. Mando saudações a Portugal 😀👍
You need a piece of copper being the hole when filling it. The copper won't weld to the piece and it will let you fill the hole better.
Hi, thank you for your tips! I will consider it next time. It will held me improve my skills! 😀👍
Best work. Parabéns 👏👏
Muito obrigado! 😀 Fico feliz que você goste do vídeo. Envio-lhe saudações da Alemanha! 😀🤝
👍Schöne Idee, zum Schluss das Logo-T-shirt zu bügeln und zum subscriben hinzuweisen! Grüße in die Werkstatt!!
😀 Ja man tut was man kann ! 😋👍
FICOU CHIK NOTA 1000
😀
very nicely 👍
Thank you 😀👍
Przepiękne jest to stare żelasko odrestałrowane z 1789 roku produkcji pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍👍👍
Przesyłam pozdrowienia dla Polski😀
Creative and beatiful in the vedio,the movement of the car.greetings
Greetings to you my friend 😀
QUE BUEN VIDEO Y QUE BUENO USTED
¡Muchas gracias! Me alegra que te gusten los videos. Espero que disfrutes los próximos videos. Saludos de mi parte para ti! 😃👍
From what I have seen, most cast iron has been braised and not welded. The cast iron is to soft and blows out with the amps needed to weld.
Hi my friend 😃 Yes I think you are right. Welding cast iron was not the best idea. But sometimes you have to try to learn for the next time 😉 I am happy that you watch my video. Thank you! I wish you all the best and send you greatings from Germany 😃👍
Amazing work brooo ! Keep going ! You have subscribe and like
Thank you so much for your comment! I will Check you channel too 👍😀
💫💫
If you were to use a tank of water that you put the item in @ the beginning with salt. Pit a wire to help the electricity along to the iron and then an iron rod across the top to hook the wires to. You would have gotten rid of most of the rust from the start.
But nice job
Thank you so much for your comment 🙂 I've seen your suggestion in other videos. I think I'll try it on one of the next projects. I still need to get some information about it. Thank you my friend and greetings from Germany. 😀
👍👍👍
Thank you😀👍
good job, subscribed
Thank you so much! I am proud that you like my videos 😀👍
👍🏻👍🏻👍🏻
Большое спасибо! Thank you!
Why did the rust magically dissapear when the oil went on it.
There is silver stuff in the oil so it looks silver after using the oil.
Couldn't you've used j.b. weld or something?
I am no pro in welding. It was my first time. Hope i will get some more skills soon. Thank you for watching my Videos 😀👍
That's not for cloths silly. It's a camping grilled cheese press 😊
Let's try... 😄👍
Pre hear rhe cast you are welding
Thanks for the tip. I'll take that into account next time! 👍😃
God job bos fom indonesia😁👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🇲🇨
Thank you so much bro! 😃👍
they are called geese not gooses
If you belive it or not. I saw it on Google Translater. But that sounds so wrong and crazy to me that I used "gooses". That sounds much better to me stupid german. 5 years school english and always bad school grade 😅 Please excuse me for that 🫣 Thank you for watching my videos and writing a comment 😀👍
...обломаную лерку в детали просто молотком выбил, но со сваркой поработать надо!👆😖😉👍👍👍💥
мы работаем над этим😀👍
💗😜😀😃💗
😅👍
Learned how not to do so many things. Thanks!
It's a pleasure! I am glad that you like my videos! 😃👍
never heard of cutting oil, if you use it your tap won't break as quickly or not, and the voltage plus amperage setting of your welding machine is way too high
Thank you for your comment 😀👍
Those are Sandhill Cranes not Geese. But never the less that’s very cool.
I'm not that good at biology. I thought it was geese. Thank you for pointing this out and for watching my videos.😀👍
Hmm..christmas vacation...star wars...crocodile dundee
😃 Thank you for your comment my friend! Star Wars and Crocodile Dundee is right 👍 Christmas vacation is wrong. Sorry. Do you want to try another suggestion? Or should I tell you the 3. movie? I am happy that you like my video 😀
Apocalypse Now
The Empire Strikes Back
Crocodile Dundee
Ja! That's right! First time someone found All 3 movies 😀👍Thank you for watching my Videos!
Ładnie wykonana renowacja. Tylko jedna uwaga nie można tu stosować śrub gwiazdkowych ani krzyżakowych bo to dyskwalifikuje całą robotę.
Myślę, że masz rację. Śruby nie pasują do żelazka, które ma więcej niż 100 lat. Niestety dla mnie to była jedyna opcja. Mam nadzieję, że efekt nadal był zadowalający. Pozdrowienia dla Polski! 🙂👍
@@bestrestorechannel Dzięki i pozdrawiam.
National Lampoons European Vacation, Star Wars, Crocodile Dundee
Close 😉... Crocodile Dundee... Star Wars... Apokalypse Now ("I love the smell of Napalm in the morning!") - Thanks für watching my Videos 😀👍
Es waren keine Gänse , Kraniche , man hört es am Ruf . Eine Kreutzschlitzschraube und eine Schraube mit Innensechskant sind fehl am Platz , Restauration heißt im Original erhalten. Ich wünsche dir weiterhin viel Glück. Gruß aus Magdeburg
Vielen Dank! Grüße zurück nach Magdeburg 😀👍
How much one of these cause I have one I want to sell am from the Bahamas
Sorry, I dont know that.
А зсередини в димарі гвинт, який обварювали, так і залишився стирчати?
Так. іншого шляху не було.😀
😂 quiero que hagas un trompo de fierro
Maybe next time 😉👍
The next time you want to put finish on a wood piece. Keep it on the machine.
hmmm... ok👍
Acco
Absolut 😉
Darth Vader star wars
Right 😀👍
Así de oxidada es mi vida sin balor será que Jehová así quiso que viviera de mantenido eso creo
I wish you all the best!
one hour is a really "too much long" video... content is good, but seeing EVERYTHING of EVERYTHING is not..
Hi! Yes you are right! It is too long. I want to manage my videos around 20 - 30 Minutes. But it is not easy. For this video I had 900 GB of film material. Round about 20 hours. But I will shorten the next videos, i promise 😀👍
@@bestrestorechannel if u make a simple video for 20/30 mins is very good, because if it is too long, u can loose watchers
I agree with that.
very nicely 👍
Thank you Bro! 👍🙂
@@bestrestorechannel 💫💫💫
Przepiękne jest to stare żelasko odrestałrowane z 1789 roku produkcji pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍👍👍
Przesyłam pozdrowienia dla Polski