Awesome video. Thank you Sir. I have the exact same issue on knocking noise when turning over any bumpy surfaces on my 2022 RAM Rebel. Now I know what to tell the dealer as they haven't figured it out yet!
I don’t off road, but I still can hear that noise when entering or leaving the driveway at my job site. Uneven pavement surface caused it. I always wondered what the issue is, thanks to your video, I understand it. Thanks for sharing your knowledge. No vehicle is perfect, I had a similar issue in my 2012 Raptor, but it only seemed the rear end was doing it, in a certain location.
@@CatchMeOffroad I have a 21’ TRX too. I’d like to get a newer year so that these little things are all just fixed, but it just doesn’t make sense with insane interest rates and vehicle markups for nothing from 21’ to 23’ model years 😢
Anyone know the torque specs? I broke one front bolt. And it looks like I might have to remove the body mount to make it more accessible to get the bolt tail out.
Have a Nov 21 build 2022 trx and it clunks on left side under driver when I go slow over a large and long speed bump. I can’t find a fix. What do you think?
@@CatchMeOffroad My 23 TRX developed a chatter type noise that sounds just like what you showed in the first part of the video during the off-road driving (it's not quite as loud, but it sounds like the same noise). This last week while it was super cold (highs in the low single digits or just below 0) the noise came out of nowhere. I'm always very aware of new noises and such on my vehicles, so I noticed it as soon as it started.
I believe the front tow hook and A pillar are 80ftlb, and B/C pillars are 97ftlb. Technically you're supposed to use new bolts also, but I reused mine 👍🏼
@@adamg3911 loosen bolts first then jack up the body. You can use the rock rails or side steps as jack point if you have them. I didn't use loctite but might be a good idea if you have some of the blue stuff
This swap did not go well for me. Started on the passenger side, removed front and A pillar bolts, loosened B and C pillar bolts. Jacked up cab to get top of A pillar and when I went to remove the B pillar the bolt it now just clicks and spins 1/4 turn and does not come out or in. When I did the driver's side, I removed the front, A, and B bolts and loosened the C pillar bolt and now that bolt does the same thing. Now I have a damaged bolt on both ends that I can't get out or tighten. Time to do some research. Open to any thoughts on what to do next...
Wow do you think the threaded part inside the body is stripped or something? What is the clicking noise? I wonder if something broke when you lifted the cab, you would have heard a noise though I'd think... Have you tried putting some lift pressure on the body with the jack, and loosening the stuck bolts while there's some tension? Not sure if that would help, just a thought...
@@CatchMeOffroad Finally got some time this weekend to dig in further. Turns out there was no damage to the body mount threads. Only had to remove the rear seat to get access and see. I was actually able to back out the body mount bolt even with the clicking. I took a die to the threads of the bolt and it was able to go back into the body mount and be torqued down with no issues. I think there was an issue with the amount of thread locker that was causing the issue of the bolt clicking.
Awesome video. Thank you Sir. I have the exact same issue on knocking noise when turning over any bumpy surfaces on my 2022 RAM Rebel. Now I know what to tell the dealer as they haven't figured it out yet!
When I was at the dealership we had a TRX come in for knocking or rattling. I don’t think they ever figured it out. Very well come be this.
I don’t off road, but I still can hear that noise when entering or leaving the driveway at my job site. Uneven pavement surface caused it. I always wondered what the issue is, thanks to your video, I understand it. Thanks for sharing your knowledge. No vehicle is perfect, I had a similar issue in my 2012 Raptor, but it only seemed the rear end was doing it, in a certain location.
Yes I'm glad they fixed the issue for newer builds as well, just something you have to deal with if you want a first model year of any new vehicle 👍🏼
@@CatchMeOffroad I have a 21’ TRX too. I’d like to get a newer year so that these little things are all just fixed, but it just doesn’t make sense with insane interest rates and vehicle markups for nothing from 21’ to 23’ model years 😢
Thanks for this… I just got my parts in last week and did the swap yesterday.
Awesome! Was everything in stock? Last I heard, the crown looking pieces were on backorder...
Took a few weeks to get them. I think I ordered about a month ago and they told me the parts were on back order. I just had them leave the order open.
Thanks always..
Well here i was upset my truck took 8 mos to come glad a decent amount of issues were sorted like this before it came.
Is there a service bulletin for this?
Thanks for the video. Do you by chance have a part number for the bolts as well?
Sorry I don't, although your dealer should be able to help. Definitely good to use new bolts when swapping mounts 👍🏼
6511825AA. Front body mount bolts! Had to find that one out cuz I broke one!
Anyone know the torque specs?
Anyone know the torque specs? I broke one front bolt. And it looks like I might have to remove the body mount to make it more accessible to get the bolt tail out.
I have the front clunk. Jan 22 build… I wonder if there is a way to see if I have the old mounts.
Yes pretty sure you have the old mounts... you could look at your mounts and see if the part numbers are different than the ones I listed.
Have a Nov 21 build 2022 trx and it clunks on left side under driver when I go slow over a large and long speed bump. I can’t find a fix. What do you think?
Check the opposite body mount from the one shown on this video.
my truck has been making a knock sound if i hit a big enough pot hole ands its a january 22 build
Are these issues also on the 23’ year builds?
No it was corrected in the first half of 2022.
@@CatchMeOffroad My 23 TRX developed a chatter type noise that sounds just like what you showed in the first part of the video during the off-road driving (it's not quite as loud, but it sounds like the same noise). This last week while it was super cold (highs in the low single digits or just below 0) the noise came out of nowhere. I'm always very aware of new noises and such on my vehicles, so I noticed it as soon as it started.
Saved me some research hopefully. How many ugga duggas did you hit the bolts with when putting it back together?
I believe the front tow hook and A pillar are 80ftlb, and B/C pillars are 97ftlb. Technically you're supposed to use new bolts also, but I reused mine 👍🏼
@@adamg3911 loosen bolts first then jack up the body. You can use the rock rails or side steps as jack point if you have them. I didn't use loctite but might be a good idea if you have some of the blue stuff
This swap did not go well for me. Started on the passenger side, removed front and A pillar bolts, loosened B and C pillar bolts. Jacked up cab to get top of A pillar and when I went to remove the B pillar the bolt it now just clicks and spins 1/4 turn and does not come out or in. When I did the driver's side, I removed the front, A, and B bolts and loosened the C pillar bolt and now that bolt does the same thing. Now I have a damaged bolt on both ends that I can't get out or tighten. Time to do some research. Open to any thoughts on what to do next...
Wow do you think the threaded part inside the body is stripped or something? What is the clicking noise? I wonder if something broke when you lifted the cab, you would have heard a noise though I'd think...
Have you tried putting some lift pressure on the body with the jack, and loosening the stuck bolts while there's some tension? Not sure if that would help, just a thought...
@@CatchMeOffroad Finally got some time this weekend to dig in further. Turns out there was no damage to the body mount threads. Only had to remove the rear seat to get access and see. I was actually able to back out the body mount bolt even with the clicking. I took a die to the threads of the bolt and it was able to go back into the body mount and be torqued down with no issues. I think there was an issue with the amount of thread locker that was causing the issue of the bolt clicking.
@@AndyDrury awesome, glad to hear it was fixable! 🙌🏽
What A pillar pod mounts are you using ?
SDHQ mounts with M&R Automotive lights
@@CatchMeOffroad Thanks, these guys are local to me here in AZ.
I thought you were going to post the part numbers in the description?
Sorry ended up just posting them in the video...if you pause you can read them