REBUILDING A BLOWN BMW E46 M3 ENGINE (ASMR)
Vložit
- čas přidán 18. 02. 2022
- IN THIS VIDEO WE REMOVE A BLOWN BMW E46 M3 ENGINE, REBUILD IT AND INSTALL IT BACK IN TO THE CAR. THIS IS A FULL REBUILD VIDEO SO KEEP WATCHING TO SEE THE RESULTS OF THE REBUILD.
SOCIAL MEDIA:
(INSTAGRAM) / performancerebuilds
(FACEBOOK) / performancerebuilds
(TIKTOK) / performancerebuilds - Auta a dopravní prostředky
FOLLOW US ON INSTAGRAM instagram.com/performancerebuilds/
DYNO!? 😉
Cost for build?
Should have replaced that radiator fan motor, they tend to go boom....
@@Truthseaaker пппшпшппшпшшпп
What was the parts cost and how long did it take? Did you have to get anything machined?
You are the most rookie, professionals I have ever seen in my life. Not everyone dares to do this job in their own backyard, you guys with balls.
me and my dad rebuilt
alot of motors on our back porch bsck when i was in highschool, one thing we never do tho is resurface the block like this, too much work and time consuming just for the block to blow again after couple years.
@@yeeahyeah9246 This M3 will be sold as "Engine NEW"
@@GOLTURBO555 you betcha, i know sometimes honing works if they get real precise with the measurements, we still dont risk doing it, rather spend couple hundreds to a thousand get a precise bore and resurfacing on block and heads, reputation is better than couple hundreds extra, never seen someone sand paper the heads and block before 😅
@@yeeahyeah9246 it's do able with good results, just look up how to sand a block on this website you may be surprised
@@ratataran yeah i know it is, but i know you have to be real precise with it especially with the measurements, unless youre just sanding it just to clean it and not to resurface the block, i just dont trust myself getting the right measurements to resurface a block using sand paper, if im gonna put the time and money to rebuild a motor i might as well throw in couple of hundreds for resurfacing so i have a peace of mind that it wont blow in couple months, but if it works for you then props to you man. 👍
A rebuilt engine is a thing of beauty. Fantastic job guys
are you blind?
The amount of work that went into this and the video editing is just amazing. Thank you
He's a certified BMW mechanic,not a technician.He knows what he's doing.
not even check rod clearances ,decking the block by hand,machine the cylinder walls without knowing how is the outcome.
also did you use the same crankshaft?
but they painted the block and head with silver! This alone added not less than 100hps!
@@aakolov at least 100 😀
Didn't measure rod bolt stretch either.
He use the same part or he change new parts for this engine and block ?
Intrigued from start to end. The amount of detail and skill to pull this off. Well done!
Just a huge and patient job for the mechanic. And he did it perfectly!!! BMW has a very capricious engine.
Fantastic skills, you make it all look extremely easy. E46’s are great machines.
Hi ! First timer here. I am usually picky about videos of restauration and I judge them harshly let me tell you guys something , you guys are artists I looked every detail you guys went and Lord everything was just perfect I really am glad that I found people like you that know what they are doing. Greetings from Republic of Kosovo and keep up the good work.
I like videos about restaurants too 🤣 I think you mean restoration
Like using impact on knock sensors/block? Or reusing head bolts? 😳
Shqipe
Nice work. I wish there was hard dedicated guys like that in my town. Seems like im the only one here in my town that seems to put that kinda effort on rebuilds. Im rebuilding a 2003 Nissan Frontier 3.3L Engine right now and it would be fun to have dedicated guys around to have more fun doing the job. Keep making great videos and keep on bring cars back to life.
Hope you dont use a fkn electric zip gun to do it..ugh, the lazyness.
U
And and and, you can have fun, and then, and then, you can have fun again, yeah, and and, then your having fun, yeah, and and, then, and and then you can have fun hee hee, and and then you have fun again hee hee.
@Zippo People who strip and rebuild engines with any power tool are just fkn lazy, you cannot tell if something is undoing, or shearing, gash as fk, mechanic for 45 years here not just since you tube was invented, carry on LOL
@Zippo No shit Sherlock the fact you can "run stuff up with them" .... I note how you jump on the "dont use them to crack bolts"....bit....after I gave you the clue LOL
That was a excellent rebuild loved it from start to finish keep up the good work 💯💯💯💪🏾
Fantastic!
Kudos to you gentlemen, from accident damage to blown engines, there's nothing on a car that you cannot fix!!
👌👌👌
Fire damage ☹️
@@rj6110 it actually can! Check out tavarish burned car rebuild
The engine definitely was worse for wear when it came in but you guys did an amazing job rebuilding this block absolutely killing it guys 🔥
Im confused - 12:08
Didn’t they replace that blown engine block with a brand new one?
Or did they re-use the one with the holes in it from what looks like a blown rod?…
@@mro4ts457 they definitely used the one with holes, they wanted to make sure all the oil came out before the first start, that's how you know you got a good BMW engine
@@1mawesomel1kethat
😂Tell me about it lol
My fuckin differential is making a whining noise now after I just fixed the brakes and vanos timing.
If it aint broke, it’s not a BMW🤣
I can honestly say, out of all the things in life I wish I could do, it would be that right there! Great work!
just brilliant....love the tools, no chat, excellent work. big respect from Mauritius
Watched the whole video it was truly something. Putting it all back together is my favorite part.
You guys are awesome, been watching from the start and you blow me away .zee amazing keep up the channel it’s my go to relaxation mode
The beauty of having a shop. Try that on the side street and having to worry about something getting stolen by the next day or a neighbor ratting you out to the city. When your out there just minding your business. Sheesh!
I was gonna just have this video playing in the background while I worked, but it was only about 5 minutes before it had my undivided attention. A great rebuild of a thrashed engine, beautiful work!
man these guys know what they are doing! got it started back up on the first go! and it was a manual transmission! legit
Wow! That's the coolest thing I ever seen for a rebuild. Well done!
Pleasure to watch. The younger mechanic is a master 👍🏾👍🏾👍🏾
We need more video like this .....no music no talking ......thanks guys
I liked your video, no bullshit, no commentary, no ads just pure business.
One of the best engine rebuild videos I have ever seen on youtube. You sir are a master craftsman. Stumbled upon this video and am glad I did.
wow you did not see many videos huh?
amazing, detailed restoring bmw engine, impressive!!!!, congrats guys !!!
Incredible effort guys. Good camerawork, editing and very detailed
You guys made it look simple.🙂 But this know it wasn't and to film it at the same time. Outstanding work👏🏾👏🏾
Incredible zee congratulations on building a engine which was completely knacker BMW will be getting in touch shortly offering you a job
A rebuilt engine done right is a thing of beauty lads. Blessings from Shropshire.
I love disassembly videos like this. I have learned how to do so much stuff with videos like this.
The work you do in house is amazing. All these USA videos shipping things here and there to get done, but you boys just get stuck in an get it done in house, and done really well. I'm a fully skilled engineer and that whole process looks very daunting to me. Hats off to you.
Incredibly satisfying. Great job guys!
There’s a good chance that a lack of power wasn’t of any concern prior to this minor mishap.
Great video.. thanks for sharing
Just brilliant, the time effort to every detail 👍👍
Congratulations, excellent craftsmanship! I wish you continued success
no music , perfect engine surgeons doing their stuff .
Thank you for not using old gaskets. I really appreciate it.
After working with some guys from India I can tell you with enough patience and time almost ANYTHING can be rebuilt even using old used parts even if those parts are broken. Not sure if I would reuse S54 bearing shells but if they are not worn and have good clearance have at it! Just did a light rebuild on an s54 and used lots of used parts but new gaskets.
Fascinating video. You guys are really talented 👏
Perfect way to fill time while doing online traffic school 😅
from start to finish in one video. love it!
What a wonderful workmanship. Great work 👌🏾
More ASMR rebuilds please! More more more!!
Absolutely incredible superb job best regards to you guys and everyone out there Mark from billericay 😃👍🚗🇬🇧
I have to say lads I take my hat to you 👌 watching how you strip down that engine and take it out of the car is Amazing 😱I mean how do you know how to put it back together again 😜 I mean what parts go on first and we're are the bolt's...god bless you lads you do a great job 👍👍👍
Great work guys! How the hell do you remember where it all goes 🤯🤯🤯
Ikr
Excellent work on motor, love to watch it, i learning something new! BMW POWER!
best video of how its done,very good we need more like this !
How the heck some people can destroy an engine is beyond belief. Thanks for the video; a great job on one of the best engines BMW produced. 🙂
Not keeping up with oil maintenance
You dont know what you're talking about.If they were any good they wouldn't have a recall of all 2001 to 2003 for new rod bearings.2004 cars had the up dated bearings and mine spun a bearing and scratched the crank.Matter of fact the s65 in the e92m3 the s85 in the m5 and m6 are eating their rod bearing too.When rod bearings are wear items the engines are garbage.
Good job guys. Very impressive work.
That was awesome !!! So satisfying to watch !
Great job! One comment, never use 2 pins with the timing bridge. One at a time. If you need to adjust a cam you'll be off on the other side or bend a pin.
This is art. Great work
so relaxing to watch when I'm supposed to be working at work lol
Right thing to do rebuild the engine. You guys will get massive returns
The e46 m3 is just a beautiful machine! It really is Art on 4 wheels!
I loved every second of this video thanks for documenting !
FairPlay lads that was a fair bit of work
Well done... you worked hard... how professional... may you be healthy and happy❤❤❤❤❤❤❤
Every video of you guys gets me more interested in the automotive field❤️❤️
Would it not be better to put alot of new parts in engine Would need like new then
He could of super tuned it too and once that battery was charged… omg heart❤ that baby started right up
I Salute you guys, you are the best mechanics l have ever seen.its my 1st time watching your videos keep it up..
Pure dedication and talent
Awesome, enjoyed that a lot, many thanks.
bravo, my man, you're good mechanics. your video is better, I watched it to the end without ever getting bored
Majstori moji! Odlicniiste! Perfektni i profesionalni! Stigla dizalica! Samo napred puno pozdrava iz SRBIJE
Them youth know them thing hood vuys
Wow. I enjoyed ever single torque wrench click. 😊
My most favourite video on the internet now 👍🏽
This is a piece of art !! Thank you
im already preparing myself to have to do this one day and honestly this is making me look forward to it
I never saw a such perfect repair video! Abo!
I was about to purchase a BMW but after watching this video I changed my mind
Smart man
This young man is mustard at stripping down, would love to learn from him, good work mate 🤝👍👌
should not use such a hard material on insertion of the pistons. even the slightest improperly vectored shock could permanently deform the piston or worse yet cause disassembly in the rotating assy below the piston or worse yet unseat one of the rings.
Otherwise decent DIY rebuild job. Would also recommend a machine shop handle honing / boring and maybe crank balancing.
Thoroughly enjoyed that. Nice work 👏
Amazing work. What makes an engine to blow up like that?
Niesamowite. Super super robota.
Szacunek.
This was dope, every second of it.
so excited to watch tearing down the machine, but for sure knowing all part to assembling again not left anything is something...
Great work performance Rebuild very toughest job it's simple for you guys really great
Great vid from you guys...best one I`ve seen all year so far.
That's a new use of a durablock I've not seen before!
You guys are awesome!!, what a fantastic video,,keep up the good work
Wow, when you say blown, you're really not kidding are you. That thing had big enough holes to sink the Titanic.
U guys did great job. Wonderful video
Very professional, restore the car only by itself
Gotta say, this is really enjoying to watch...
Great job guys!
Puts my feeble car maintenance efforts to shame.
And I used to have an E46 M3 - fantastic car.
I just love a straight six everything about it is just excellent
beautiful job guys. A pleassure to watch
excellent work thank you for the nice video but question why didn't you change the guides?
Awesome vid.Thanks for sharing.
Outstanding build guys 👌👌👌
Amazing! Absolutely amazing.
At first I thought, "well at least the block doesn't look beat." But then I saw the tool cart through the other side and said "Ohhhhhhhhhhhhhh!!!" LMAO!
1yr, 1.5M views, and only 14K likes,,, wtf?
I was mesmerised until the end, then easily added my 👍🏼
Well done lads
That was amazing gentleman. Very well done.
Very good video an grate work , step by step , to understand all the beginers. Hello from Romania!
Fantastic! Congratulations guys!