Air circulation fan is supposed to work 24 hour and there is no connection socket for that , exhaust fan is suppose to work when temperature increases, yes need to place a fan throwing air outside by making hole in incubator body
@@Umairworkshop Thank u brother and can you stop the motor from rotating when the chicks are starting to break egg shells so as to stop movements and proper hatching
You are welcome, you can press the set and down button and the f1 settings will open there is a egg turning timer setting ,here is the information might help czcams.com/video/_SJ4mpKdwyA/video.html
Thanks for the educative video sir, my question is: assuming you have a larger incubator, and you need two turner motors, can you wire two motors to a single Controller?
Thanks for all your videos. My question is: can i use w9002 instead of xm18 though it doesn't have exhaust fan slot? I need to put it in a big incubator where exhaust fan is important. And it doesn't have the slot. But i need it because it is cheaper
You are welcome, exhaust is a very needed option in big incubator in case temperature rises up it will on the exhaust fan to throw excess temperature, if you are making big incubator consider xm18d
Hi mate any reason why the humidity sensor won't work. I have wired it up correctly but it says EE for the humidity level. could the Humidity sensor be faulty?
Please brother bohat din sy esku wiring ki urdu video Dhund rha hun.... Please thori c or mehnat kr den urdu me video record kren Allah apko ajr dy mery bhai
How come momma birds don't adjust their humidity when hatching, or do they by never getting off the eggs during a natural "lockdown" phase? Asking for a friend :)
please need help, tanks for content: please, where the exhaust fan located at the top of the incubator connects, the one that removes excess heat and humidity, I'm not referring to the fans that blow hot air onto the eggs.
It is socket 16 and Com which is 15 two wires of exhaust fan will be place there, it will be placed on the back of incubator to take out excessive temperature and humidity
Brother, it's me Rafain Shah from Hyderabad. Well brother I need it urgent because I have khaki Campbell breed ducks and they started eggs. I have so many orders for chicks I have to fulfill them so please help me in this matter. And one more thing how can I contact you Sir?
I have one question if you could please help me mine is a roller tray not a left and right movement it rolls the eggs in rollers and the wire is red and black only where would I put those in which numbers in the unit and also for the bulb the third one that is like an alarm do I have to put that and what is that for? If so what else can I use if I have to use that then the bulb
If the egg Turner is 220v then one wire in com and other wire in 17 it will only trigger at one side, for the alarm it is supposed to be a bell which is one wire in com and second wire in 20 , for further understand please search xm18 wiring on Google images
@@Umairworkshopone more question sorry does the unit control the humidity as well like turning off the humidifier when it’s high and on when it’s low on the unit can you adjust the humidity too also one more thing on the unit can you add the duration the turning will last and each hour the rotating should rotate the rollers for the eggs
Why are we to install 2 heaters? What is the power of each of them? Suppose I increase the size of the incubator does will the amount of electricity increase also?
1 heater is big heater which work when needed second heater work as to manage the temperature to stay on 0.5 degree difference and will always turn on , yes it will consume more electricity
Q: on my XM-18D (110V) there are two pins labeled "12V" + and - (red/black). Do you know if this is an optional 12V "IN" similar to the 110V "IN" on the opposite side of the lower connectors, should I choose to control all 12V equipment? Are they just labeled to (save on printing costs for the schematic sticker) and only functional if I would have gotten the 12V version vs the 110V? Or is this a 12V "OUT" power supply should I wish to install an external switch and perhaps 12V internal light or manual 12V fan?
@@Umairworkshop yes. I checked with a Voltmeter. I assume the company printed one label to use for their 110V and their 12V versions or models. If mine were a 12V version, the 110V "INput" would be a dead terminal pair.
Hi, can you please help me. I have automatic egg turner tray with 2 wire motor, i connected them one to 18 and the second to 17 but it didn't work, then i tried to contact one to 17 and second to 15 it worked but only to the left side, any ideas?
Note that ALL wires controlling the relays control 220v equipment. The heater, the turning motor, the humiditifier, the fan, the light, etc all must be 220v (or 110v if you have a US/110v version). You cannot connect a DC 12v (or 24v) piece of equipment directly to this controller unless you wire an 220(110v) power outlet, and use a transformer adaptor (known as a "wall wart", the black box at the end of the plug). Each DC item will require its own transformer - 12v or 24v power supply as you would burn up a DC item with 110v or 220v AC. Note in this video, the egg turning motor is 220v. When buying you're incubator equipment, try to stay with a uniform power requirement instead of mixing AC and DC items for ease of installation. I've created a modified power strip that is easily removed for cleaning between hatches and also allows for replacing failed equipment on the fly should a fan, motor, or humidity unit fail during a hatch. Consider running an external alarm to inside your home (or WIFI) so you can be notified quickly, and also consider having back up equipment ready on hand. Things break when you don't want them to!
I have found it pretty challenging to find a 220V humidifier in Canada for a decent price...most of what I have been able to find states right on the Ad "NOT FOR USA". I am in Canada but I suspect the CSA Regulations are equal to if not higher than the USA. Do you know of a similar Controller in 120V?
I have the same, my question is the following: the wires of the temperature probe have no particular distinction, both are black ???? (a particular clue on the wire that goes to 5 and 4)
There is no polarity for temperature sensor probes. They are not "powered" (humidity sensors are powered by 5V and therefore, require color coded wires).
Bro i created a incubator it successfully running but Thier is current cutting problem,if i want to buy battery it is a high price,i can't invest that much money,pls tell me a solution pls bro
perfect course step by step. show nice
Thank you
Very easy for understand as breefly explain by you sweet bro thanks ♥️
You are welcome
Best video so far. Thank you
You are welcome
Thank you. You did give us good lesson
You are welcome
good job sir. You are the best
Thank you
We love you and ur channel. One 😘
Thank you
Good video brother
Thank you
Brother you have perfectly explained everything!!!
Kindly tell me the setting of inner and exhaust fan plz.
The inner fans are direct working 24 hours ,only exhaust is controlled by the xm18 for maintaining heat inside and ventilation which is already set
@@Umairworkshop And 1 more thing which type of aluminum sheet (market name) should be used in incubator?
@@umartahir007 you can tell them you need a almunium sheet for bathroom door which protects from water
Good vid bro, so please explain difference between exhaust fan and air circulation fan....does incubator need air holes for ventilation
Air circulation fan is supposed to work 24 hour and there is no connection socket for that , exhaust fan is suppose to work when temperature increases, yes need to place a fan throwing air outside by making hole in incubator body
@@Umairworkshop Thank u brother and can you stop the motor from rotating when the chicks are starting to break egg shells so as to stop movements and proper hatching
Again thank you
@@mondayflix8389 you can plug out the motor wires from the tray or by installing bed switch with wire
@@mondayflix8389 you are welcome
Thanks for the assistance
Help me to set how I can set time to town eggs
You are welcome, you can press the set and down button and the f1 settings will open there is a egg turning timer setting ,here is the information might help
czcams.com/video/_SJ4mpKdwyA/video.html
Brother, is this kind of thermostat, still need to be calibrated or not??regarding with the temp. If the set value of the temp. Is correct??
It is factory set no need to calibrate
you have link for buy "Alarm wiring" . Does it come with the device or purchase separately? tanks.
The alarm wiring comes separately sorry I don't have any Amazon link
tanks for information.
Thanks for the educative video sir, my question is: assuming you have a larger incubator, and you need two turner motors, can you wire two motors to a single Controller?
You are welcome, yes same wiring of the first motor connection can be attached to second motor as well
Very nice video
Thank you
Good video bro
Thank you
Thanks for all your videos. My question is: can i use w9002 instead of xm18 though it doesn't have exhaust fan slot? I need to put it in a big incubator where exhaust fan is important. And it doesn't have the slot.
But i need it because it is cheaper
You are welcome, exhaust is a very needed option in big incubator in case temperature rises up it will on the exhaust fan to throw excess temperature, if you are making big incubator consider xm18d
Hi mate any reason why the humidity sensor won't work. I have wired it up correctly but it says EE for the humidity level. could the Humidity sensor be faulty?
Yes it might be a problem with the sensor
Please brother bohat din sy esku wiring ki urdu video Dhund rha hun....
Please thori c or mehnat kr den urdu me video record kren Allah apko ajr dy mery bhai
Okay I will try
Good day sir, very detailed video ,may I ask where can I buy the egg turner assembly that you use, thank you
You are welcome, These trays are available on online sites as well same as this controller
How come momma birds don't adjust their humidity when hatching, or do they by never getting off the eggs during a natural "lockdown" phase? Asking for a friend :)
please need help, tanks for content: please, where the exhaust fan located at the top of the incubator connects, the one that removes excess heat and humidity, I'm not referring to the fans that blow hot air onto the eggs.
It is socket 16 and Com which is 15 two wires of exhaust fan will be place there, it will be placed on the back of incubator to take out excessive temperature and humidity
How would I wire 110v version would the com be live or neutral wire ?
Com is for neutral wire only
@@Umairworkshop just received mine does it make small rattle noise when you shake it a bit?
Brother, it's me Rafain Shah from Hyderabad. Well brother I need it urgent because I have khaki Campbell breed ducks and they started eggs. I have so many orders for chicks I have to fulfill them so please help me in this matter. And one more thing how can I contact you Sir?
Salam , please see the description of this video
it so clear😃😃
Thank you
Thanks for the video. What happens is there is a power outage?
After 3 hours of power outage eggs will stop developing
great video! thank you
what size of wire do you use?
You are welcome , it is 23/76 gauge wire
I have one question if you could please help me mine is a roller tray not a left and right movement it rolls the eggs in rollers and the wire is red and black only where would I put those in which numbers in the unit and also for the bulb the third one that is like an alarm do I have to put that and what is that for? If so what else can I use if I have to use that then the bulb
If the egg Turner is 220v then one wire in com and other wire in 17 it will only trigger at one side, for the alarm it is supposed to be a bell which is one wire in com and second wire in 20 , for further understand please search xm18 wiring on Google images
@@Umairworkshopone more question sorry does the unit control the humidity as well like turning off the humidifier when it’s high and on when it’s low on the unit can you adjust the humidity too also one more thing on the unit can you add the duration the turning will last and each hour the rotating should rotate the rollers for the eggs
@@Umairworkshop also my fan is 12v so should I wire it like you did to the terminal and the other wire to 17
@@jpwonders1742 yes it will turn off the humidity and turn on the ventilation fan to manage humidity, yes can adjust egg turning time
@@jpwonders1742 it is given output of 220v if you place 12v directly it will burn please place a power supply before fan it will work fine
Hi..nice présentation !!! where Can i buy this model of mistmaker
You need to search it is model number on Google
Why are we to install 2 heaters? What is the power of each of them? Suppose I increase the size of the incubator does will the amount of electricity increase also?
1 heater is big heater which work when needed second heater work as to manage the temperature to stay on 0.5 degree difference and will always turn on , yes it will consume more electricity
Kitne watt tk ka heter laga sakte hain
Around 2 thousand watts tak ka heater laga saktay hain
How to run the fan and no left and right motor
If you want to run the fan then you need to place in Ground and 220v same where controller getting power so fan will keep working 24 hours
What is the warning mission for point 20?
That is for alarm can attach 220v siren in 20 and com , so it will siren when temperature low or high
Now you are from any country and is there an export of a control panel ready and full of cables and how many dollars?
Sorry cannot export , you can search on Google for this controller and local electrician to wiring
Umair bhai urdu me bataya karo bhai pl
Okay I will in next videos
Q: on my XM-18D (110V) there are two pins labeled "12V" + and - (red/black). Do you know if this is an optional 12V "IN" similar to the 110V "IN" on the opposite side of the lower connectors, should I choose to control all 12V equipment? Are they just labeled to (save on printing costs for the schematic sticker) and only functional if I would have gotten the 12V version vs the 110V? Or is this a 12V "OUT" power supply should I wish to install an external switch and perhaps 12V internal light or manual 12V fan?
I tried to connect a cpu fan but it doesn't work then give 12v to it nothing happens also
@@Umairworkshop yes. I checked with a Voltmeter. I assume the company printed one label to use for their 110V and their 12V versions or models. If mine were a 12V version, the 110V "INput" would be a dead terminal pair.
Hi, can you please help me. I have automatic egg turner tray with 2 wire motor, i connected them one to 18 and the second to 17 but it didn't work, then i tried to contact one to 17 and second to 15 it worked but only to the left side, any ideas?
It is suppose to work on 3 wire motor but can also work with 2 wire motor but will only trigger one side for that motor , it will work fine no problem
Vou comprar um, porque e completo. Brazil
Okay
E só xm-18 ou tem mais algum referencia?
sir sabhi saman ka detail de sakte h kya
I made a series of information like these you can search in channel
czcams.com/video/ga6L71qATKY/video.html
Do exhaust fan and inner fan are connected in same port or not please cleare that
No , inner fan is connected directly from outlet
Note that ALL wires controlling the relays control 220v equipment. The heater, the turning motor, the humiditifier, the fan, the light, etc all must be 220v (or 110v if you have a US/110v version). You cannot connect a DC 12v (or 24v) piece of equipment directly to this controller unless you wire an 220(110v) power outlet, and use a transformer adaptor (known as a "wall wart", the black box at the end of the plug). Each DC item will require its own transformer - 12v or 24v power supply as you would burn up a DC item with 110v or 220v AC.
Note in this video, the egg turning motor is 220v. When buying you're incubator equipment, try to stay with a uniform power requirement instead of mixing AC and DC items for ease of installation.
I've created a modified power strip that is easily removed for cleaning between hatches and also allows for replacing failed equipment on the fly should a fan, motor, or humidity unit fail during a hatch. Consider running an external alarm to inside your home (or WIFI) so you can be notified quickly, and also consider having back up equipment ready on hand. Things break when you don't want them to!
Thank you for good information
I have found it pretty challenging to find a 220V humidifier in Canada for a decent price...most of what I have been able to find states right on the Ad "NOT FOR USA". I am in Canada but I suspect the CSA Regulations are equal to if not higher than the USA. Do you know of a similar Controller in 120V?
@@brucenelson9404 it comes in different voltages you can search on Google if it is available international
I'm from South Africa 🇿🇦 where can I buy the xm-18d? Please help
You need to search on Google if someone in your country selling it
@Umairworkshop is been a year now trying to get it with no luck. I've been scammed several times. Please help brother
@@clearancechirwa9364 you need to get it from Ali express please search on CZcams how to order from there
I have the same, my question is the following: the wires of the temperature probe have no particular distinction, both are black ???? (a particular clue on the wire that goes to 5 and 4)
It can be connected in any socket of 4 and 5
There is no polarity for temperature sensor probes. They are not "powered" (humidity sensors are powered by 5V and therefore, require color coded wires).
Brother, i have a question, exhaust fan is ok, but where is the circulating fan?
I have ZL 7918 A controller. 🇱🇰 Thx
You need to install the circulation fan separately or you can place it's wire where the xm18 getting 220v
@@Umairworkshop Appreciated your reply 🇱🇰 Thx a lot
Bro my rolling tray motor has only two wires now which one wire I should put into 15 (neutral)
You can place any wire in the left or right and other wire in com
Hello my problem is that, I bought this controller thing that it's Dc, I want to connect it directly to solar. Please how should I convert it to dc ?
You can use Inverter for that purpose
هلأ انت من اي دوله وهل فيه تصدير لوحت تحكم جاهزة وكامله الكيبلات وبكم بدولار
You can search on Google
Do you if there is way to change the controller from celsius to fahrenheit?
This xm18 only works on celcius
@@Umairworkshop ok thank you for your help.
Awesome
Thank you
Please sir what's the difference between xm 18sw and this One??
Xm18sw have a wifi connection and added feature
How can I stop and start motor rotation during and after lock down?
You have to place a male female connection when joint with motor
@@Umairworkshop thanks
Hi ,
ET on my controller doesn't work can you help me?
The ventilation should work if high temperature if it still it work then change the fan otherwise faulty in xm18
How many volts is the fan???
Fan is 220v 15 watt fan
Bro i created a incubator it successfully running but Thier is current cutting problem,if i want to buy battery it is a high price,i can't invest that much money,pls tell me a solution pls bro
You mean load shading or current fluctuation
@@Umairworkshopno bro, current problem ,in a day their will be only 18-20 hours current will be Thier
@@Umairworkshop i need a mini inverter bro please tell me one solution
@@pochampallyikkathweaverswo1354 you can search mini inverter on Google
follows
Thank you
Aoa bhi
Salam, yes what is the question
Sir is key price kia hai
In sub items Kay information is video mein
czcams.com/video/VPJWOXv3Z7Q/video.html
@@Umairworkshop already whach video
@@Umairworkshop thanks
Worst sound quality
Sorry about that