Lichtenberg Epoxy Table | Lichtenberg burning
Vložit
- čas přidán 23. 12. 2021
- How to make an epoxy and wood kitchen table ? kitchen tables can be made in many ways but this is our method of making an epoxy + wood kitchen table.
#OCEAN #Oceantable #Epoxytable - Jak na to + styl
![Graver la FOUDRE sur du bois ! - Figures de Lichtenberg - [Science 2.0]](http://i.ytimg.com/vi/DBCtZLPxbXA/mqdefault.jpg)
Well done on still being alive.
Please tell me you have engineering in your name, what sort of engineer are you? No way is it electrical.
One of the most dangerous set ups I have seen, you could not pay me to hold onto the high voltage rods like you do, absolutely no safety standards at all.
If you not answer some simple questions stop doing this
1 insulation rating on the rods
2 voltage rating on the cable
3 safety equipment voltage rating
4 what triggers the transformer incase of emergency
5 have you trained anyone on high voltage rescue and CPR
6 voltage output of the transformer
Your video is a lesson on how not to do this.
I truely love how people with no idea of the danger they are holding show people how to do this wrong, well done.
Nice work on your table and chairs. Beautiful. I've done some burning like that but never mixed it with epoxy. Enjoyed your video.
Lindo trabalho.
I strongly recommend that you do not hold the probes in your hands, A fellow in western Canada did and he never got to tell his story. Beautiful art work.
Gorgeous craftsmanship!
Beautiful table & chairs 👍
Beautiful job
Beautiful Work!
Thank you very much!
its beautiful!!!!!!!!!!!!!!!!
Wow. A awesome job.
Thank you!
What you use prior of burning word? Epoxy ?
It's a very good
What did you use for the polishing with the wheel after the final sanding
Saludos desde PERÚ
Buen trabajo y se nota lo bueno
Thank you very much
Muito lindo. Obrigado
Thanks
wow that was amazing!
Try the process on red-clay...flower-pots, roofing tiles.
It burns a glossy black ribbon of glass into the clay.
It doesn't branch at all, rather it arcs directly between the points.
Once the arc is burning into the clay, the glassy discharge can be guided with ease.
A 15Kv 'ignition transformer' can pull about 4 inches before the arc fails.
Было бы здорово, если Вы указывали, какую смолу и затвердитель используете. Отличная работа!
What is the music at 1:40??
beautiful art work
Thank you! Cheers!
Awesome work :D
Gosh, that's beautiful! 😍
Please be sure to stress the vital importance of ALWAYS using complete proper ventilation and safety protocol, such as P100 cartridge ventilator mask, eye protection, & gloves when working with resin. It is incredibly dangerous to ever inhale resin fumes, so cautionary advisory to anyone who does currently or has considered working with resin! ALWAYS put your health & safety first. Some of the damage from the inhaled toxicants is irreversible. Make cool stuff safely! 💗
Maybe I should re-consider my "just don't breathe in and open a window" protocol lmfao.
Though it has worked well so far
Never mind the electrical hazard.
This only applies if you happen to survive the fractal wood burning , please don't do it !
4UnlimitedBEing, without doubt, the concerns you list pale compared to the fractal burning. Any one of thousand possible screw ups give a 70% chance of outright electrocution, and the 30% who don't die are badly mangled, blinded, severe nerve, limb heart and organ damages.
no blue red ❤
Не забывайте, что это работа связана с риском поражения эл. током.
А ещё вас могут зарезать в подъезде
@@darkaz899 Нет, лучше 380V, если хочешь умереть
One of the best resin designs I’ve ever seen. Absolutely awesome. 👌🏻💯
Can't this be done with a welder? I am not holding those things in my hands.
Voltage wouldn't be high enough I think, no smart person would ever hold high voltage probes in their hands
What product do you use for the blue color?
epoxy resin
Yeah I was talking about the pigment.Epoxy resin is clear.What product is the blue pigment color???
@@stevechance4422It's called Stupid Blue Extreme.
It looks tree of life
Tree of life when product is finished :)
Just realised that i bought this exact same table😅
😁
These lichtenberg figures are all over the surface if the earth. Makes me wonder what could have so much current as to do that to the earth?
Could it be lightning? Hmm
@@BrandonWatson-sk3yq what could form a lightning bolt big enough to scar miles worth of a lichtenbeg figure.
A lightning bolt that size is pretty mind blowing! Perhaps Zeus' lightning bolt would do it
Safety,safetysafety!
Very dangerous but it’s worth it. Amazing to watch. Just subscribed so thank you for the calming burns ⚡️💯😎
What is dangerous?
@@patriziapiccardo2428the fractal burning. High amperage can cause death. Extreme caution must be taken. That said, it’s awesome!
Yes..I agree..I ised a power pack from a microwave oven and took out the resistor that kept voltage low..if you use this..BE CAREFUL..you could actually die..graveyard dead !! But works great !!😅
Helo sir
god i wish it was a guitar
WARNING... This is very DANGEROUS
One of my friend was doing this ...and She DIED!!!
Which transformer have you used?
dont try this. super dangerous
optimus prime
I've heard dozens of DIY noobs have died doing this electric burn table technique.
What was your setup for doing this without getting electrocuted?
Just don't touch the electrodes, baby.
Had a friend who died doing this. It's cool but extremely dangerous.
Sand me content no sir
Fractal burning poses a significant hidden risk of electrocution. The American Association of Woodturners Safety Committee and Board of Directors strongly recommend woodturners avoid the risk altogether, by refraining from the use of Lichtenberg burning techniques.
This type of art has become increasingly popular and deadly due to exponential popularity in the use of CZcams type video teaching. THIS CAN BE DEADLY!!!
It's natural selection, baby.
@@darkaz899moron
This is very dangerous, don't do it, folks. One slip and you're dead.
A process much like this, but originating from space, is how the Grand Canyon and similar places were created.
Lol
lol holy crap this guy has a death wish
How do you so happily conclude he has a death wish and why are you so happy about it?
औबरो वस( एसयोर)$ इंडिया पिसी( 57)
Do not build these do not use these it’s not worth it I lost a very good friend I was two days away from using my own that I had built his son eight years old found him dead in his garage don’t do that to your family
I'm confused. What has he table got to do with the dead man?
@@patriziapiccardo2428 people are building these devices called a Lynchburg device they are extremely high voltage. The two most popular ways are to use a transformer out of a microwave oven or to purchase a neon sign transformer. The problem occurs that you’re holding them one in each hand and if you make contact it basically runs electricity through your arms through your heart disrupting it’s normal electrochemical rhythm. Without a defibrillator The heart will simply just fibrillate not pump blood thus your dead. The way that the device works is that you use an electrolyte either salt water or baking soda painted on the board so it absorbs and then the electricity will follow the electrolyte in the solution thus burning the board.
@@oneanddonetzone3673the high voltage involved also cooks your muscles on the way through, so in the slim chance you live, you will never be the same again. Low voltage does what you described high voltage is a whole other world of hurt.
Thanks for info i dont do this. 💙💙💙
Not everyone is dumb like your friend.
The worlds most dangerous copy and paste! Epozy tables is the most copied uncreative thing ever, but adding the fractal stuff is hilariously NPC.
Sounds like someone is jealous.