Bevel Steel Like It's Nothing with the Metabo Beveller KFM 16-15 F
Vložit
- čas přidán 26. 08. 2024
- Metabo's KFM 16-15 F Beveller can put a perfect 45-degree bevel, up to 5/8" deep, on steel and stainless steel plate, and pipe. With a 14.2A motor and 3 carbide cutting bits, the Metabo beveller cuts through steel like butter. Maybe not hot butter, but like regular butter.
Not only does the Metabo have tons of power, but it's also includes soft-start technology. This soft-start helps with bring on all the power of the KFM 16-15 F gradually, so the user keeps a steady hand while starting the cut. Also, Metabo has included overload protection with their beveller. Even when you have the big and tough jobs, if the tool overheats or senses overload, it will shut down without harming any of the internal parts. Once the tools cools back down, normal operation is resumed.
Metabo includes a 3-year warranty, so long as the owner registers the beveller within 4 weeks. The cutting bits are servicable and indexable. Three cutting bits each have 4 indexable sides. When they become dull, just remove the torx screw, turn the bit 90-degrees and replace the torx screw.
Also available are cutting bits specific to stainless steel for enhanced durability. The Metabo KFM 16-15 F can be purchased through a network of industrial supply stores, so check yours today. Check Metabo.com for the industrial supply house near you.
Check out the full review on shoptoolreviews.com
Super sweet video. Love this tool. Also good to know: no parks = cold cut. No deformation on the material, no decoloration, and you can touch the metal right after the cut. Great video!
👍
can u put a 37 1/2 degree bevel on a pipe with this tool?
Yes it's adjustable. I too would like to see the follow up video.
👍
Where is the other video
Here is a link with detail info on Metabo's website: www.metabo.com/us/enus/tools/cutting-sanding-milling/metal-processing/bevelling-tools/kfm-16-15-f-601753620-bevelling-tool.html?listtype=search&searchparam=kfm%2B16
👍