Ujoint vs CV joint axles
Vložit
- čas přidán 15. 01. 2017
- As with the Cardan joint, the effective life of a CV joint will be shortened as joint angles increase. While equalization of joint angles is still important, it is less of a concern for CV joints by their nature. ... This is where wide-angle Constant Velocity joints shine
www.treadwright.com/?afmc=f6
My vlog channel • Video
my email ronleggett94@gmail.com
new videos every Monday Friday
add me on snap chat cherokee ronnie
my insta cherokee.ronnie
m. profile.php?id... - Auta a dopravní prostředky
You can grease cv joints if you take off the band and use a gear worm clamp to hold it back down, just make sure it won't hit anything when it spins.
This just saved me a huge hassle trying to figure out which one I need for my zj. Winter is here and I NEED MY 4 WHEEL DRIVE!!!
This is where the old landrovers had it going on. They had big CVs... and they ARE greaseable.
My 98 ZJ was/is stock U-joint. Its a rare thing for ZJs as I found this last year looking for new ones and finding new front axles was difficult. Even strolling through the junk yards only about 15% of the ZJs had u-joints but still some do.
your channel is pretty darn good keep it up ronnie
Street N Jeep thanks man 👍🏻
Awesome info. Great video. Thank you for the videos that you put out, very informative. Keep on keeping on bro. OlllllllO
I've got a 96 ZJ 4.0 that has u-joints but I'm swapping the front end which has CV. The front end was out of a 98 with the V8. I think I'm going to stick with the U-joints though. This vid really helped me out. Thanks!
Matt Swanson u joints are better
Great explanation!
I'm thinking about doing this. In over 15 years of having TJ's it's rare I get more than a couple of years out of my front joints. It's mostly an on road commuter with 31s but no matter what quality I put in them the crappy NY roads and salt slop destroys them. Usually not even able to get them to take grease after only a year
Good vid, gave me some good info, cheers
Great and lots of info thanks
Thanks for the quick and easy explanation, CV is only as good as the boot that holds the water out of it is what I understood. I should remember to get my truck's u joint greased next time.
Hey thank you very much
Any idea what kind of u joint shaft i need to look for a 98 5.9l zj? Just bought one and its missing the front shaft
Which vehicles use CV joints having articulation angle greater than 40 degrees?
That was helpful thank you
i just got a pair of Cv axles from rock auto and there to long for my 2000 Charokee i think they got wrong pt numbers or just cheep crap i have select drive should i look up a app for a 2000 grand Charokee select drive as well???
The U-Joint axle shaft range is cost from $450 min. to $1200 for a set.
These universal joints are not to replace a front wheel drive CV shaft? Only a 4 wheel drive on the front end?
so u can put cv style in a charokee i just use it as a daily my u joints are shot so i would rather go with smoother cv ones i saw them showing some on rock auto though it was in the wrong category i guess not
I love how you say "vehicle" :)
Vee Hickle.
I'm looking for a manufacturer or shop that would make "retractable axles, " with "U" or combination with "CV" joints?
At some point the axle would have to lift up and bring in the wheel / retract the wheel.
Thanks to you or anyone that would be able to help me.
I have an 09 tundra and i replaced an original cv. But my concern is the bellows. If they get hit by chance and tear then replace. I seen the split boots but scepticul. You seen anyone change to ujoint?
If boot has a hole anyways, a syringe pop in tip for grease gun is available, to add fresh grease. Don't add too much; will come out at high speeds, along with any water.
Best to try and replace or patch the boot, after it's dry.
I ripped them alot, running rzr on trails.
Air hammer could pop axle shaft from cv, to split and get new boot and clamps on.
A spring wire clip went around axle in a groove and cv hole, popped onto axle shaft with spring clip inside machined grooves of axle and cv.
Not sure if cherokee's can split that easy or not; new to cherokees and researching.
Relieved to hear the cv is at least equal to the U-joint design.
hey ronnie i have the cad axle can i use the cv axle in mine and is there a specific one i need for both sides
Good stuff ❤❤
clearance to inside of the U joint for better articulation. Yes you can re grease a CV joint.
Nice..
With this explanation, is it better to have u-joint on the rear axle and cv joint at the front? Newbie here.
I Ike the u joint shaft ... but I don’t know why for any reason
RCV brand cv axles are available now.
I want to install u joint instead of cv axle in my isuzu truck. Can anybody guide me in this regard. Is this will be ok simply or can create problem for me?
"This is what you call the outer piece".. Umm, do you mean the stub shaft?
Yah i keep popping my cvs on my 93 zj on 31s
Correct me if I'm wrong but u said ujoint style will fit in grand Cherokee but I've heard u cannot swap from Cherokee to the grand Cherokee with verilok cuz Cherokee is a 1"-2" to short so it won't go in far enough to lock the splines in
That sounds like the wj axle vs zj axle. Wj axles are a couple inches wider. Xj and zj are the same.
Good video
rgsdmj spangler thanks man
CV take more abuse on turning and putting power to it. A ujoint will take more abuse on straight a ways where your jumping on it or down shifting. It depends on how you drive. I have need for CV around here in dd due to amount of turns. But in a trail rig I would run ujoints for 4wd crawling without a bunch of sharp turns. Zj have different wheel bearing depths for rotors to work. Also the turn stops on the axles. A ujoint hub will have turn stops. A CV axle may not have turn stops.
damn good videos , but that's what you do
Is it Mario music in the background? It's very distracting.
Uni....jOinT iS mRe poWerfUl😶👍
So I have a 99 cherokee sport. I'm trying to switch to c.v axles which ones do I buy. Please and thanks
What is the best u-joints to have?
Spicer
Will CVs not bind in 4wd ? In a sharp turn?
Nope
Does anyone on here know if I can use the u joint axle from a zj with my wj...it will really mean alot if I can get some advice about this.
No you're not going to be able to the WJ has a wider axle.
RCV all the way
Front tires “hop” in 4 wheel in a turn because the two front tires turn at different rates in a turn. Not because a u-joint binds. Proof? Take out of 4 wheel drive and turn... No hop? U-joints are still turning and binding (unless you had un-locking hubs, but you don’t). Just an FYI. Have a good one!
rubbish,never had u joints hop..only way they do that is if your limiting bolt is too far in. as mine was on an f100 lwb, the guy did it so he could park it easy. hell of a turning circle,but hopped in 4x4..i fixed it. never shit a uni. ..uni,$26. 1.5 hrs to replace. cv $250 +-. chevy,s come with 4 spare,in the tray.. cv,s have allways been crap..
Who does a CV conversion to U joint?
Stronger
@@cherokeeronnie what company, thank you
@@silver3157 No one does a conversion, you need to find one that is compatible with your rig and just swap them. There is no converting an axle between the two, just changing them out completely.
Did you do any research before hitting the record button?
CV Joints are stronger, can handle more torque, last longer and vibrate less than U-Joints.
So I have a 99 cherokee sport. I'm trying to switch to c.v axles which ones do I buy. Please and thanks
So I have a 99 cherokee sport. I'm trying to switch to c.v axles which ones do I buy. Please and thanks