Do I need a phone system to use my analog phone with a Grandstream ATA

Sdílet
Vložit
  • čas přidán 6. 09. 2024
  • Do you need a PBX or phone system to use your Grandstream Analog Telephone Adapter (ATA)? No you don't. It's SUPER easy if you do have a PBX but as I show you here you can connect your analog phone directly to a phone provider using the ATA.
    Join our community here: community.will...
    Hire us! williehowe.com
    Protecli Store (affiliate link): amzn.to/3Tcj3rp
    R86S (affiliate link): amzn.to/3TwjUVf
    Want to join us in learning how to deploy network services like this? Put your name on the training list now: williehowe.com...
    Name Cheap Affiliate Link: namecheap.pxf....
    Affiliate Links (I earn a small percentage of the sale if you use these links):
    UniFi Store General Link: store.ui.com/?...
    My AmazonLink: www.amazon.com...
    Netool: netool.io use code WHT to save at least 10%!
    Digital Ocean Affiliate Link: m.do.co/c/39aa...
    Patreon Link: / williehowe
    Contact us for network consulting and best practices deployment today! We support all Grandstream, Synology, DrayTek, Obihai, Poly, Ubiquiti, MikroTik, Extreme, Palo Alto, and more!
    Come back for the next video!
    Twitter - @WillieHowe
    TikTok - @whowe82
    SUBSCRIBE! THUMBS-UP! Comment and Share!

Komentáře • 12

  • @terrijohnson9183
    @terrijohnson9183 Před 2 měsíci +2

    Can u do step by step for the HT801 to fax machine?

    • @Jetfumes
      @Jetfumes Před 2 měsíci

      Thank you for asking I also can not for the life of me figure how to set it up with my printer/fax.

  • @josepedroborrego
    @josepedroborrego Před 5 dny

    Can we use two HT801 back to back to extend a POTS line over IP (e.g. using WiFi)? My use case is the following: I have the operator's router (FTTH converter to DVB-T coax/4 RJ45 Ethernet ports/2 RJ11 POTS ports), I have an old analog phone connected to 1 RJ11 POTS port, but I would like to connect this to another analog phone in another room and I don't have wired connection passed between both ends. I am wondering if with an ATA or two like these (one in each end) I could use WiFi to connect them, would this be possible?

  • @ginaward5648
    @ginaward5648 Před 3 měsíci +1

    Brilliant little device, use the HT802 a lot

  • @nag-son695
    @nag-son695 Před 22 dny

    Pulse dialing phone, antique. Will it work togheter with a ordinary router + HT801/802 using the head jacket?

  • @kevinbradt835
    @kevinbradt835 Před 3 měsíci

    @Willie Howe can you make a video on how to do a site to site ipsec vpn between pfsense and edge router x using FQDN i have tried and it refuses to connect or even work

  • @JekKent-xb3lf
    @JekKent-xb3lf Před měsícem

    Willie, could i use 2 ht801s on my home network to connect two analogue phones together as an intercom??

  • @05glisedan
    @05glisedan Před 3 měsíci

    Connect ATA to broadband modem, you're good to go.

  • @FindLiberty
    @FindLiberty Před 3 měsíci

    Will it work over T-Mobile 5G home Internet (uses their Cell Phone Network)?
    Maybe not; TM may be intentionally blocking the standard VoIP ports.
    They've even dropped their hardware ATA device (RJ11-RJ45 jacks).
    Is it the service provider that incorporates some port forwarding scheme
    to allow it to work (...until TM notices and then blocks those ports too)?

    • @WillieHowe
      @WillieHowe  Před 3 měsíci +1

      Depends on the SIP provider.