Adjusting valves on a 2016 - 2021 KTM 450 SXF EXC XCF
Vložit
- čas přidán 5. 09. 2024
- Support us by grabbing your parts and accessories from AOMC.MX!
aomc.idevaffil...
Adjusting valves on a 2016 - 2021 KTM 450 SXF
Quick, simple, easy overview on how to adjust the valves on a KTM 450 SXF
Thanks for checking out my video! Please subscribe, like, or comment, and check out our gear below!
Merch is live guys! www.teespring.com/TheMXGuru
www.Facebook.com/TheMXGuru
Instagram @TheMXGuru1
Also, check out our other channel / rtipowersports
Send me something to review / test!
The MX Guru
PO Box 240
Winfield WV 25213
CHECK OUT MY KIT ON AMAZON : www.amazon.com...
My gear!
Handlebar Phone Holder: - amzn.to/2tvR4el
Action Cams
GoPro Hero 7 Black
Primary Action Cam amzn.to/2TXInSt
GoPro Hero 5 Black
Secondary GoPro Action Cam : amzn.to/2ADAJ6M
Waterproof Housing : amzn.to/2B0Xt3n
Mount Kit : amzn.to/2kx6YAA
Battery / Charging Kit : amzn.to/2TVYYGg
Dango Designs Mount : amzn.to/2Naxom2
Yi Lite Action Cam
Secondary Action Cam Yi Lite : amzn.to/2kvHjYW
Yi Cam WaterProof Case : amzn.to/2kvbn7a
Selfie Stick / Tripod : amzn.to/2AWnfpp
Handheld Gimbal Stabilizer : amzn.to/2BJbord
Drone
Primary Drone DJI Mavic Pro : amzn.to/2AXNXxB
Mavic Pro Battery Multi-Charger: amzn.to/2BDn3Jk
SD Cards : amzn.to/2DcU3Zn
Vlogging
Vlogging Cam - Canon M50 : amzn.to/2Ee9brW
Vlogging Mic : amzn.to/2CmzRnH
Vlogging Camera Adaptor: amzn.to/2zN3N9L
I'm new to ktm, but I absolutely love this design not having to take the cam n all that off just to adjust the valves. That's awesome.
dang that makes this look very slick and easy......
Love this video .. thanx for making this!
Glad you appreciate it Jimmy, thanks for visiting my channel!
i know it's kinda randomly asking but does anyone know of a good website to stream new tv shows online?
@Kieran Thomas try flixzone. You can find it on google =)
The manual makes it sound much harder, gonna do this on my SMR450
First, thanks for the video. I have a new to me 450 xcw. Doing a valve check @ 1500 miles, and found the intakes are zero clearance and just like in your video. This is with the marks aligned. If I rotate the cam just a bit they are loose and in spec. Do I ignore this and just use the timing marks (I will have to tap the shaft out). Or assume all is good. Thanks for any insite.. Smitty
It's hard to see on video but I think you've used wrong mark on the cam wheel and that's why your intake valves were super tight. You need to use mark which is on the outside of the cam wheel just below the chain.
Where did the bolt that was used to pull up the rocker arm shaft come from?
I had it laying on a shelf! Haha
I believe its the same threads as a triple clamp bolt.
Awesome, thanks boss.
I am adjusting my valves right now, and I don't see any dot on the exhaust shaft. Is there a way ton install the exhaust shaft or both ways are fine?
There's only one correct position.
What happens if the shims fall into the motor how would u get them out just wondering magnet flip the bike drain oil what do u do
Pull the stator off and find your prize, simple.
When I tried to get mine to TDC, the dot is either at 2 o'clock, 6 o'clock, or 10 o'clock. Any suggestions?
You need to rotate much slower, also remove the spark plug for easier rotation, put a screwdriver in the top so you can more easily see the piston height.
I rotated it as slow as it would let me. I ended up putting a dowel in the spark plug hole and found out that TDC is when that dot is at 6 o'clock. Not sure if it was marked wrong from the factory or what.
@@lock6686 That's super odd, I've never seen that on any cam on any bike. Stock cam? Does it have a straight line across from the dot? Send me a photo on FB or IG if youd like!
@@mxgryan Yeah I'd love for you to take a look. I'll send a picture on ig. Stock cam and no mark across from it. The only mark I see that could be for alignment is around 3 o'clock.
@@lock6686 im intrigued by this...lol
Looks easy 🤔
I can only get my 450 into 5th??? 🤭😂