Just got my license and bought my first bike, a VT750 ACE from ‘97. As a legal consultant I don’t have any experience with working on anything mechanical, but I’d love to get a little handier and do the maintenance myself. If it wasn’t for your videos I’d be completely lost. Thank you very much for sharing, you’re incredible! Greetings from the Netherlands
I've done a lot of oil changes over the years, but never one on a motorcycle. There were a couple things I wasn't sure enough about to run out and tackle this on my own, but you covered them here...well...you covered everything here...front to back. Just know that you were appreciated by someone here in central Indiana today Dennis!! Thanks man!
Thanks for the video. I tried for two days to get my bolt off without success. After watching your video I got it off in two minutes. It was so easy I can’t wait until the next time to give my 750 Ace a oil change.
I recently purchased a 2019 Aero with 1400 miles on it (in November in Ohio) & still have managed to double the miles already this winter. This video is the BEST I have seen for how to change the oil, which is a MUCH different process than my last bike. Thank you, sir! I really appreciate how well you explain everything.
I have a 99 Shadow I just bought and am learning about. Thank you! Your video is only the 2nd so far that I'm saving, of the aprox 42 I've watched, which will certainly come in handy when I began to work on my bike, and in turn have so far help me learn about my bike! Thank you for taking the time to post this video. Its much needed! Very much so!
Thank you very much and I appreciate you watching! Check out the other videos on my channel, I have several for the Shadow you may find helpful If you click on 'Playlists' you'll find a playlist that lists all the Shadow vids I have. Thanks!
Great video,I like to watch these videos on the shadow ace even if i know how to do whatever the topic is in order to just kind of go through the steps in my head before tackling it,and usually learn something that maybe i wasnt doing correctly or a way to make job easier,thanks to u and others that make these task easier for the average weekend" mechanic"
Hi Dennis. I bought a 2007 Honda Shadow Spirit C2 last year. I've been loooking for a video to change the oil without a lift. Your angles and walkthrough commentary was great! Thank You.
As a car guy going to a motorcycle I wasn’t too nervous but just needed that second set of eyes on this to make me feel better, wish my car was this easy to do lol. Your bike setup is also exactly what I’m going for! Just ordered my floorboards at work last night with the heel toe shifter, installed my windshield today and about to put a back rest on for my lady/ luggage
I am new to fixing and changing stuff on my bike! I am a woman and dont like to depend on others 😁 I just fixed my 2001 750 honda shadow ace after watching some videos on youtube because it stopped in the middle of an autism ride! Just got my motorcycle jack and will be doing work on it this winter to prepare for the 2022 spring! 🥰 Thank you so much for the oil change video! I will do it this week! You video and explanations are easy to follow and your voice is so calm that it looks easier than it is 😄 Thank you!!!
Thanks I'm old school, I use straight weight Castrol oil ,with 1/2 cup of marvel mystery oil to reduce friction ,done it this way on every bike I own for 30 yrs , started this on my 75 motor quzie ,run 400 tho ,2 shadows over200 thousand no problems 😊
I have a 2002 Shadow Ace 750 VT750CDD, my manual says NOT to screw the dipstick in to check the oil level, just get the bike vertical then put in the dipstick and check the level. Maybe you have a different model. Great video, thanks.
You are correct! And thanks for pointing that out. I've always screwed it in fully to get a reading, but apparently that isn't necessary. It looks like it will only create a very slight difference (looking at my dipstick), but, for the sake of accuracy, it should only be put in far enough to seat, but not screwed in completely. Thank you for watching and thanks for the comment!
Also your video on removing the rear tire was helpful. I was wondering how to get my torque wrench on that rear axle nut without removing the muffler, never crossed my mind to just torque it from the other side, got it torqued down correctly now, thanks.
@@dwcoffey you are the only one I could find that explained how to change it without a lift or torque wrench but still be able to get the job done thank you 🙏🏽
I also have the same bike. 23,000 and just starting to warm up. Great bike I traded in my Harley for this. My Harley spent more time in the shop than on the road. My Honda’s ( I have 2 ) They never or-rarely give me any issues. Truly great bikes... Sorry Harley’s folks but these bikes are so much fun and hassle free. Guess who is changing to K AND M Filters! That nut on top is great!never thought of that!
when checking your oil.... warm your engine for a few minutes, the wait another 3-5 minutes after turning off the engine, always have the bike straight/vertical. remove the dipstick, clean it, put the dipstick back into the reservoir BUT DO NOT SCREW IT IN, re-check the oil level.
Thank you, Mr. Coffey! My '99 Shadow American Classic thanks you, I thank you, and my wife thanks you! Side Note: *also I'm a huge fan of the movie The Green Mile so the spelling of your last name alone made me hit like and subscribe. All the best.
Dennis, Thanks for the great video. I have a 2003 ACE VT750 CDB, same as yours. I will be doing my first oil change soon and your video will be very helpful.
Fantastic! One item to note that a kind viewer pointed out to me.....in my video, I say to screw the dipstick all the way in to check the oil. The manual actually says to just push it in until it seats, but do not screw it in to check the oil. I don't think it will make anything more than a minor difference in the oil level, but it is worth noting that I got it wrong in the video. Thanks for watching! I'm sure you'll do a great job!
Regarding the drain bolt, I always use the shortest wrench and a new aluminum crush washer. I never over-tighten anything. The oil filter is ALWAYS hand-tightened; it manages to tighten itself enough that I still need a wrench to get it off. Keep up the great videos!
Thanks for watching Jeffrey! I almost did the same thing when I first got my ACE.....the additives in the energy conserving oil will interact badly with the clutch.
@@dwcoffey Im 24 and I learned this lesson the hard way.... now everytime I start the bike up it makes a knocking sound around the shifter. Got rid of the 10 30w motor oil at least, I don't know what to do at this point. Don't want to spend thousands at a Honda dealership either. Any advice for the younger generation, sir? =)
Could you please make a video on your floorboards and how to change coolant please please please !!!! I have honda shadow ace 2003 and struggling to find right floorboards for it. I like your video dennis you are so so thourough. Cheers mate.
Thanks for watching, Abhishek! The floorboards on my bike were made by MC Enterprises. I don't think they are available anymore. I haven't needed to change my coolant yet, but will definitely make a video when I do! Thanks!
Awesome video, thank you very much. I was just wondering about using motorcycle oil compared to motor oil. I bought 10 40 oil that doesn’t have the stamp on the back just like you instructed but I’m hearing from people that you need to use motorcycle oil specifically or els you can damage the clutch.
Thanks for watching, Seamus! According to Honda, as long as your motor oil does not have "Energy Conserving" in the compliance stamp, it is ok to use with a wet clutch. That's all I use and have never had a problem.
Thank you for posting. Have a 2000 ACE with unnecessary 'downtime' (IT-speak).. coz I take to my mechanic for an oil change.. who of course can't get to it right awaay. Your video is detailed enough to demystify the process. Thx!!
One quick question.....All the information and manuals I've read say when checking the oil level to NOT screw the dipstick back in. Just insert it until the threads hit and then read the oil mark.........
It's a great video BTW.....I wasn't trying to call you out or anything. I just bought a 2002 Shadow Ace and was wondering how to measure gauge it. I think different bikes do it diffferently.....Too confusing.
Dennis, I use a long funnel to do mine, about $2 at walmart. Also, I use a HIFLO HF303 filter for $3.55 on Bikebandit. Great videos!! Going to adjust my rear brake TODAY! I have a 2001 VT 750CD ACE, 29,800 miles, original owner!.....where are you from Dennis, I lived many years in Greensboro NC your accent sounds familiar!
Thank brother, love your bike did you cut off you pipes? I saw a video in the library. I know you have to jet the carbs. Just wondering if you did on yours thanks
Dennis, I had my bike in the shopfor another reason, but told them to go ahead and do and oil change. REcently, it was time for me to change it again. Well, they must have used an impact wrench to put the drain plug on. The nut is starting to strip, any ideas how to get it off? I don't have a lift, so there is no room to get a breaker bar under there. /any suggestions will be greatly appreciated! Ted
Hey Ted, thanks for watching! I'll never understand why shops feel the need to over tighten drain plugs and oil filters. To avoid rounding off the plug, I'd be sure to use a 6-point socket or a flare nut wrench. Without a lift, I can't think of another way to get enough room for a breaker bar besides laying it over on its side, gently. I have to say, I'd be real tempted to take it back to the shop and tell them they have a problem they need to fix. Maybe they could get it on a lift and at least break the plug loose for you, tighten it to normal specs and then you can do your oil change. I also like that idea because, it is possible they cross threaded it, making it hard to remove. If they did, they should fix that for you at no charge. I hope you get that worked out.
Thanks for watching, Max! I don't know if you've been able to get the filter off since commenting, but if not, I'd try one of those filter wrenches that have some teeth to grab the filter with and with the longest handles you can manage...they will give you more leverage on the filter. Make sure you are turning it counterclockwise as you look at the canister-end of the filter.
Sir, I just bought a classic addition 2006 Honda Shadow Spirit. My question is, can I use normal conventional 10/30 oil, or does it have to be synthetic blend?
Dennis Can you use car antifreeze in the Honda shadow one Guy said He used it in His Honda Goldwing. He said to use the yellow antifreeze. So If you can please let me know.
Thanks for watching! I only use Honda antifreeze, but my understanding is that you can use any type as long as it is silicate free. So, I'd check the labels carefully, but any that is silicate free should say so.
@ 5:03 there is a black hose or bar i can't tell what it is on your bike but on mine, there is a hose there adjacent to the nut you unscrew to change the oil ... you have to use a wrench as opposed to a socket wrench to unscrew this or you will hit this hose and it will be in the way (at least on my bike) what is this hose or line called? mine appears to be split at the joint right about where the nut is that you unscrew to change the oil ... just bought the bike and was about to do my first oil change and I noticed it appears to have a split there but I can't be sure unless I really propped up the bike high enough to see under there. can you tell me what this line or hose is.
Thanks for watching! It came from Motorcycle Enterprises, and unfortunately, they are no longer in business. I haven't seen one available from anybody else.
Hey Dennis, Can you do a tutorial on how you installed the light bar you have on this shadow 750. I have the same light bar and could use your expertise on install to my 2002 750 ace
I'm sorry for the delay...working too much. I took a look at mine.....the light bar has two tabs that sit on top of the bottom section of the triple tree. There are 2 holes that line up with holes in the triple tree from the factory, those holes are used to mount the light bar. I have mine wired into the headlight harness so that when the headlight is on, power is on the light bar. My light bar has a switch to turn the lights off/on if needed. I hope this helps!
@@dwcoffey Thank you Dennis for taking the time to look into my question and give me a good write up on how to install the lightbar. I will take another look for the holes in the triple tree. Again thank you!
Dennis, Which brand Floorboards you recommend ? I would rather spend a little more and get a “ Better Brand” which are the ones you have ? It’s the only piece I am missing to have my bike complete. Thank you in advance.
Hi Leonardo. My floorboards are made by MC Enterprises, but I don't think they are around anymore. I'm not too familiar with any others as these are the only ones I've ever had. Good luck and I hope you find a set you like. Thanks for watching!
Hi Dennis, your video's are wonderful thank you. I was wondering though on my 2006 Aero should I use a synthetic oil or just regular? and same with the gear oil, synthetic or regular? thank you so much!
Hi Janice, thanks so much for watching! I'm actually not very familiar with synthetic oils. I only use Valvoline regular oil. That's probably a little old school, but I've just always had great results and haven't been compelled to change yet! haha. Same with any gear oil, etc I need.
Thank you for watching, Lance! They are Motorcycle Enterprises floor boards....I don't think they are in business anymore, sadly. I like these because they are hinged....much better fro hard leans.
What oil drain pan are you using? I don't have the ACE, I just have the Aero, but I'm worried about ground clearance. If I put a dye in my synthetic, what stops the auto shop from putting dye in conventional? I would like to change my own oil.
Yes, I change all my own oil....at least I know what I'm putting into the engines. I got my drain pan at AdvanceAuto Parts. I'm sorry but I don't know the brand and the sticker for it is long gone. Thanks for watching!
Hi. I'm new to riding and wondering when you know it's time to change the oil. Ive got a 2015 Honda Shadow Phantom. Ive already put new short shot pipes on it myself and an oil change seems easy but just not sure when to do it.
Hi Amanda, thanks for watching! That's great that you've put your pipes on....I bet it sounds great! I change my oil every 3000 miles. I don't like putting an oil-change sticker on my bike, so I just leave a post-it note on my toolbox with the next mileage point.
Amanda, it depends on how many miles you do, I do mine a little sooner than Dennis, about 2500 miles, or the end of the season, like October, no matter how few miles I do. Did you adjust the carburetor for the new pipes?
Hey Jordon, thanks for watching! I get 120 miles without going into reserve. I've never run it completely out of gas, but I suspect I can get another 35-ish miles out of reserve. This bike holds 0.9 gallons in reserve.
@@dwcoffey I figure about 45 MPG but I like to stop every 100 miles to fill up. I have to use high test, or I get really monsterous back firing..even with it I get a good deal of backfires..any clue??
Pls can you tell me how to get to the LOW OIL SENSOR CUT OFF SWITCH for my 02 Honda shadow ACE 750? I chAnged the oil last night and may have put lower than recommended by accident. Ive topped it off with the right amount but and my dipstick gauge is showing full but It won’t start. I was told there’s a low oil cut off switch but I can’t find it. I can’t find my manual. Thank you.
@@dwcoffey Good stuff! Just got mine delivered yesterday. (Along with the oil, the filter, and new LED strips. Guess how I'm starting off the holiday! Happy riding! And thanks again for all of your helpful videos. I've used a few of them already myself!
Man, I don't know how you made that look so easy. Mine is kicking my butt. I have zero room/clearance to turn my wrench. And if I try to use the jack (which is the same one you use in your video on how to change the tire) it completely blocks access to plug and filter.
Just got my license and bought my first bike, a VT750 ACE from ‘97. As a legal consultant I don’t have any experience with working on anything mechanical, but I’d love to get a little handier and do the maintenance myself. If it wasn’t for your videos I’d be completely lost. Thank you very much for sharing, you’re incredible! Greetings from the Netherlands
I'm so happy these are helpful! Thank you for watching and have fun with that new bike!
I've done a lot of oil changes over the years, but never one on a motorcycle. There were a couple things I wasn't sure enough about to run out and tackle this on my own, but you covered them here...well...you covered everything here...front to back. Just know that you were appreciated by someone here in central Indiana today Dennis!! Thanks man!
Thanks for watching, Greg! I really appreciate the support and I'm glad this helped!
Did my first oil change on my 2003 ACE today. I would not have had the confidence to do it without your video. Thanks Dennis!
That's great! Thank you for watching!
@@dwcoffeyqr
Thanks for the video. I tried for two days to get my bolt off without success. After watching your video
I got it off in two minutes. It was so easy I can’t wait until the next time to give my 750 Ace a oil change.
That's fantastic! I'm glad this helped you get it done. Thanks for watching!
I recently purchased a 2019 Aero with 1400 miles on it (in November in Ohio) & still have managed to double the miles already this winter. This video is the BEST I have seen for how to change the oil, which is a MUCH different process than my last bike. Thank you, sir! I really appreciate how well you explain everything.
Thanks for watching, Andy! Enjoy the bike!
I have a 99 Shadow I just bought and am learning about. Thank you! Your video is only the 2nd so far that I'm saving, of the aprox 42 I've watched, which will certainly come in handy when I began to work on my bike, and in turn have so far help me learn about my bike! Thank you for taking the time to post this video. Its much needed! Very much so!
Thank you very much and I appreciate you watching! Check out the other videos on my channel, I have several for the Shadow you may find helpful If you click on 'Playlists' you'll find a playlist that lists all the Shadow vids I have. Thanks!
Great video,I like to watch these videos on the shadow ace even if i know how to do whatever the topic is in order to just kind of go through the steps in my head before tackling it,and usually learn something that maybe i wasnt doing correctly or a way to make job easier,thanks to u and others that make these task easier for the average weekend" mechanic"
I'm glad they help! Thanks for watching!
Hi Dennis. I bought a 2007 Honda Shadow Spirit C2 last year. I've been loooking for a video to change the oil without a lift. Your angles and walkthrough commentary was great! Thank You.
I'm glad this helped James! Thank you for watching!
Excellent video. It's nice to see a good quality production by someone who knows what he's doing!
Thank you Tommy! I appreciate you watching.
As a car guy going to a motorcycle I wasn’t too nervous but just needed that second set of eyes on this to make me feel better, wish my car was this easy to do lol. Your bike setup is also exactly what I’m going for! Just ordered my floorboards at work last night with the heel toe shifter, installed my windshield today and about to put a back rest on for my lady/ luggage
Sounds great! Thank you for watching, Cristian!
I am new to fixing and changing stuff on my bike! I am a woman and dont like to depend on others 😁
I just fixed my 2001 750 honda shadow ace after watching some videos on youtube because it stopped in the middle of an autism ride!
Just got my motorcycle jack and will be doing work on it this winter to prepare for the 2022 spring! 🥰
Thank you so much for the oil change video! I will do it this week!
You video and explanations are easy to follow and your voice is so calm that it looks easier than it is 😄
Thank you!!!
Thanks for watching and I'm glad to help!
Great job, very detailed and informative, now i feel comfortable enough to change my oil, Thank you Sir.
Thanks for watching!
Thanks for the video Dennis. I grew like 3 chest hairs after changing the oil thanks to your video.
LOL! That's great Dylan! Thanks for watching!
Thank you ! Now i can do the Oil change at my Honda VT750C2 RC44 cause i have now manual become with her. Greetings from Germany !
Fantastic! Thanks for watching!
Best Video I have seen !!!!! Nice and slow and very informative!!!!!!!
Thank you for watching, Scott!
Thanks I'm old school, I use straight weight Castrol oil ,with 1/2 cup of marvel mystery oil to reduce friction ,done it this way on every bike I own for 30 yrs , started this on my 75 motor quzie ,run 400 tho ,2 shadows over200 thousand no problems 😊
Fantastic! Thanks for watching, Art!
I have a 2002 Shadow Ace 750 VT750CDD, my manual says NOT to screw the dipstick in to check the oil level, just get the bike vertical then put in the dipstick and check the level. Maybe you have a different model. Great video, thanks.
You are correct! And thanks for pointing that out. I've always screwed it in fully to get a reading, but apparently that isn't necessary. It looks like it will only create a very slight difference (looking at my dipstick), but, for the sake of accuracy, it should only be put in far enough to seat, but not screwed in completely. Thank you for watching and thanks for the comment!
Also your video on removing the rear tire was helpful. I was wondering how to get my torque wrench on that rear axle nut without removing the muffler, never crossed my mind to just torque it from the other side, got it torqued down correctly now, thanks.
Great! Thanks for watching and I'm glad the video helped!
TellMyMother pls could you tell me from the manual where the Low oil pressure cutoff switch or sensor is ?
Finally changed my oil thank you my guy!!!!!
Fantastic! Thank you for watching!
@@dwcoffey you are the only one I could find that explained how to change it without a lift or torque wrench but still be able to get the job done thank you 🙏🏽
thanks for help. Just got a 750 shadow 2010 for my daughter.. no owners manual. Very helpful..thanks
Yes sir! Thanks so much for watching and I hope all goes well with the new-to-your-daughter Shadow!
Thanks Dennis. Worth watching. Take care.
Thank you for watching, Randy!
BEST video for Honda Shadow oil change,,,,,,, THANK YOU
Thank you Matt! I appreciate you watching!
great video! I'm now more tempted to do my own oil change on my shadow....great job.
That's great Rafael! Thanks for watching, and if you decide to tackle it, I'm sure you'll do a great job!
I also have the same bike. 23,000 and just starting to warm up. Great bike I traded in my Harley for this. My Harley spent more time in the shop than on the road. My Honda’s ( I have 2 ) They never or-rarely give me any issues. Truly great bikes... Sorry Harley’s folks but these bikes are so much fun and hassle free. Guess who is changing to K AND M Filters! That nut on top is great!never thought of that!
Thanks for watching Leonardo! Yes, I love those K&N filters....they make filter changes a lot easier!
Truly Thank you again Dennis ! I subscribed because you simplify things ! And guys like myself appreciate fellas like you! God bless ride safe.
You explain things very well!!! Thanks for teaching me a couple of things...and I've been changing oil for years.
Thank you very much for the kind comment and thanks for watching!
Gracias por tu videos me ayudan con mi honda shadow 2002
Saludos desde México
Gracias por ver mi vídeo.
Thank you for this high quality video! I appreciate the awesome camera shots and a great explanations.
Thank you Alden! I appreciate you watching and commenting!
@@dwcoffey HALLO DENNIS I HAVE 2004 AMERICA EDITION 750cc I CHANGE OIL AND PUT 15w50 ITS PROBLEM????
I have an identical bike. Still going strong with 36,000 miles on her.
That's great!! Mine has similar mileage and no problems. Dependable and pretty cheap! Thanks for watching!
I have the same year. Thank you very much for uploading these videos. Youre the man
Thanks Mike! I appreciate you watching!
when checking your oil.... warm your engine for a few minutes, the wait another 3-5 minutes after turning off the engine, always have the bike straight/vertical. remove the dipstick, clean it, put the dipstick back into the reservoir BUT DO NOT SCREW IT IN, re-check the oil level.
Thanks for watching!
Thank you, Mr. Coffey! My '99 Shadow American Classic thanks you, I thank you, and my wife thanks you! Side Note: *also I'm a huge fan of the movie The Green Mile so the spelling of your last name alone made me hit like and subscribe. All the best.
That's great...thanks for the sub! I appreciate you watching!!
You did good with the camera and a very helpful video thanks brother
Thanks for watching, Dave!
This is a great video. Thank you!
Thanks for watching, Rhonda!!
Dennis, Thanks for the great video. I have a 2003 ACE VT750 CDB, same as yours. I will be doing my first oil change soon and your video will be very helpful.
Fantastic! One item to note that a kind viewer pointed out to me.....in my video, I say to screw the dipstick all the way in to check the oil. The manual actually says to just push it in until it seats, but do not screw it in to check the oil. I don't think it will make anything more than a minor difference in the oil level, but it is worth noting that I got it wrong in the video. Thanks for watching!
I'm sure you'll do a great job!
Thank you kind sir for your service
Thank you for watching!
Same bike only black...Enjoy your videos Dennis..Informative, nice mellow and relaxed..Keep up the good work Sir!
Thank you sir! I appreciate your feedback and thanks for watching!
very clear video and easy to understand--most helpful!
Thank you very much! I appreciate you watching!
Regarding the drain bolt, I always use the shortest wrench and a new aluminum crush washer. I never over-tighten anything. The oil filter is ALWAYS hand-tightened; it manages to tighten itself enough that I still need a wrench to get it off.
Keep up the great videos!
Thanks for watching! Great tips, thanks!!
Thanks Dennis. Your Videos are very Helpful.
Thank you Paul. I appreciate you sir!
your video helps out a lot. Well time to go empty out the energy conserving oil on my shadow ace ahahaha... ):
Thanks for watching Jeffrey! I almost did the same thing when I first got my ACE.....the additives in the energy conserving oil will interact badly with the clutch.
@@dwcoffey Im 24 and I learned this lesson the hard way.... now everytime I start the bike up it makes a knocking sound around the shifter. Got rid of the 10 30w motor oil at least, I don't know what to do at this point. Don't want to spend thousands at a Honda dealership either. Any advice for the younger generation, sir? =)
Another great tutorial.
Cheers and happy 4th of July
Thank you very much! I appreciate you watching!
Hey Dennis. Still don't know where the negative cable from the battery is supposed to be attached. Can you post a video for that. Cheers brother
Gracias por el video señor dennis
De nada señor Sergio! Thank you for watching!
great job
Thanks for watching, Gonzo!
Thanks for the video!
Thanks for watching, Milan!
Best 📹video ⭐⭐⭐⭐⭐
Thank you for watching, Julio! I really appreciate it!
Could you please make a video on your floorboards and how to change coolant please please please !!!!
I have honda shadow ace 2003 and struggling to find right floorboards for it.
I like your video dennis you are so so thourough. Cheers mate.
Thanks for watching, Abhishek! The floorboards on my bike were made by MC Enterprises. I don't think they are available anymore. I haven't needed to change my coolant yet, but will definitely make a video when I do! Thanks!
Great video! Thanks!
Thank you!! I appreciate you watching!
멋진 바이크 이다.
Thank you for watching! It's been a good bike!
Muchas Gracias Hermano!
Thanks for watching!!
Awesome video, thank you very much. I was just wondering about using motorcycle oil compared to motor oil. I bought 10 40 oil that doesn’t have the stamp on the back just like you instructed but I’m hearing from people that you need to use motorcycle oil specifically or els you can damage the clutch.
Thanks for watching, Seamus! According to Honda, as long as your motor oil does not have "Energy Conserving" in the compliance stamp, it is ok to use with a wet clutch. That's all I use and have never had a problem.
great video
Thank you Steve!
Get a lift, it is easier on old bones. I fill the filter with oil before installing it, I do not know why it just seems right.
Thanks for watching, Daniel! Yes, a lift definitely makes it easier. I have another video on the lift I use now.
thanks for your video its help true
Thank you for watching and commenting!
Thank you for posting. Have a 2000 ACE with unnecessary 'downtime' (IT-speak).. coz I take to my mechanic for an oil change.. who of course can't get to it right awaay. Your video is detailed enough to demystify the process. Thx!!
One quick question.....All the information and manuals I've read say when checking the oil level to NOT screw the dipstick back in. Just insert it until the threads hit and then read the oil mark.........
Yes, you are correct. I did that incorrectly in the video. Thanks for watching!
It's a great video BTW.....I wasn't trying to call you out or anything. I just bought a 2002 Shadow Ace and was wondering how to measure gauge it. I think different bikes do it diffferently.....Too confusing.
No worries Shawn! Thanks for pointing that out!
Great video brother.
Thanks for watching, Edward!
Dennis, I use a long funnel to do mine, about $2 at walmart. Also, I use a HIFLO HF303 filter for $3.55 on Bikebandit. Great videos!! Going to adjust my rear brake TODAY! I have a 2001 VT 750CD ACE, 29,800 miles, original owner!.....where are you from Dennis, I lived many years in Greensboro NC your accent sounds familiar!
Thanks for watching, Ted! Yes, a long funnel has got to be the best way.....thanks!
Thank brother, love your bike did you cut off you pipes? I saw a video in the library. I know you have to jet the carbs. Just wondering if you did on yours thanks
Thanks for watching, Mitch! I didn't cut off my pipes, my pipes are Vance and Hines Cruzers. I did have to re-jet the carbs.
Those foot platforms and double shifter pegs look so comfy, where'd you get them?
Oh yea, I love the foot boards and my heel-toe shifter. They were made by Motorcycle Enterprises. unfortunately, they a re not around anymore.
Dennis, I had my bike in the shopfor another reason, but told them to go ahead and do and oil change. REcently, it was time for me to change it again. Well, they must have used an impact wrench to put the drain plug on. The nut is starting to strip, any ideas how to get it off? I don't have a lift, so there is no room to get a breaker bar under there. /any suggestions will be greatly appreciated! Ted
Hey Ted, thanks for watching! I'll never understand why shops feel the need to over tighten drain plugs and oil filters. To avoid rounding off the plug, I'd be sure to use a 6-point socket or a flare nut wrench. Without a lift, I can't think of another way to get enough room for a breaker bar besides laying it over on its side, gently. I have to say, I'd be real tempted to take it back to the shop and tell them they have a problem they need to fix. Maybe they could get it on a lift and at least break the plug loose for you, tighten it to normal specs and then you can do your oil change. I also like that idea because, it is possible they cross threaded it, making it hard to remove. If they did, they should fix that for you at no charge. I hope you get that worked out.
Thank you for your video, do you know which saddlebag support can I used for mine? Thank you
Thanks for watching, Tellez! Mine are just generic supports and I bent them to make the bolt hole spacing match the bike fender bolts.
I can’t get filter off. It has no nut to connect to and is not turning with hand. Used sandpaper & all. The new filter does have a nut.
Thanks for watching, Max! I don't know if you've been able to get the filter off since commenting, but if not, I'd try one of those filter wrenches that have some teeth to grab the filter with and with the longest handles you can manage...they will give you more leverage on the filter. Make sure you are turning it counterclockwise as you look at the canister-end of the filter.
I ended up stabbing the filter with a screwdriver & twisted & it came right off with a nice little oil splashing. 😅
Also, after how many miles should i change the oil? It doesn't tell when the oil change is due.
Thanks for watching! If you use organic oil, I like to change mine every 3000 miles. If you use synthetic oil, I change mine every 5000 miles.
Sir, I just bought a classic addition 2006 Honda Shadow Spirit. My question is, can I use normal conventional 10/30 oil, or does it have to be synthetic blend?
Thanks again for watching! You can use either. I wouldn't switch back and forth though. I'd try my best to stay with either organic or synthetic.
Dennis Can you use car antifreeze in the Honda shadow one Guy said He used it in His Honda Goldwing. He said to use the yellow antifreeze. So If you can please let me know.
Thanks for watching! I only use Honda antifreeze, but my understanding is that you can use any type as long as it is silicate free. So, I'd check the labels carefully, but any that is silicate free should say so.
@ 5:03 there is a black hose or bar i can't tell what it is on your bike but on mine, there is a hose there adjacent to the nut you unscrew to change the oil ... you have to use a wrench as opposed to a socket wrench to unscrew this or you will hit this hose and it will be in the way (at least on my bike) what is this hose or line called? mine appears to be split at the joint right about where the nut is that you unscrew to change the oil ... just bought the bike and was about to do my first oil change and I noticed it appears to have a split there but I can't be sure unless I really propped up the bike high enough to see under there. can you tell me what this line or hose is.
Thanks for watching! That is the lower radiator hose. Hope you get it all fixed and get out to ride!
Where did you get your heel/toe shifter? My 02 Shadow ACE only has the toe shifter and I have wanted the heel/toe shifter for a long time
Thanks for watching! It came from Motorcycle Enterprises, and unfortunately, they are no longer in business. I haven't seen one available from anybody else.
Thanks for the info .... I'm just your average back yard garage hack... I have the same bike and haven't done an oil change, so thanks!
Thanks for watching, Lester!
Hey Dennis, Can you do a tutorial on how you installed the light bar you have on this shadow 750. I have the same light bar and could use your expertise on install to my 2002 750 ace
Thanks for watching! The light bar was installed on mine when I bought it...but I'll try to get a chance to look at it and see if I can help.
@@dwcoffey thank u for quick reply and I really could use the help on getting my light bar installed.. You do great work & easy to follow along.
I'm sorry for the delay...working too much. I took a look at mine.....the light bar has two tabs that sit on top of the bottom section of the triple tree. There are 2 holes that line up with holes in the triple tree from the factory, those holes are used to mount the light bar. I have mine wired into the headlight harness so that when the headlight is on, power is on the light bar. My light bar has a switch to turn the lights off/on if needed. I hope this helps!
@@dwcoffey Thank you Dennis for taking the time to look into my question and give me a good write up on how to install the lightbar. I will take another look for the holes in the triple tree. Again thank you!
Let me know if I can help. Good luck!
Where did you get the pipes?
They're Vance and Hines Cruzers. Man they sound good on this ACE engine! Thanks for watching!
Anthony I also put Vance and Hines on my 2001 ACE and it sounds insane.
Your Ace came with a heel tow shifter? Where can I buy a heel tow shifter for my 2002 Ace 750?
Thanks for watching, Harry! No, this and the foot boards were an add-ons from Motorcycle Enterprises. Unfortunately, they are no more.
Dennis, Which brand Floorboards you recommend ? I would rather spend a little more and get a “ Better Brand” which are the ones you have ? It’s the only piece I am missing to have my bike complete. Thank you in advance.
Hi Leonardo. My floorboards are made by MC Enterprises, but I don't think they are around anymore. I'm not too familiar with any others as these are the only ones I've ever had. Good luck and I hope you find a set you like.
Thanks for watching!
Hi Dennis, your video's are wonderful thank you. I was wondering though on my 2006 Aero should I use a synthetic oil or just regular? and same with the gear oil, synthetic or regular? thank you so much!
Hi Janice, thanks so much for watching! I'm actually not very familiar with synthetic oils. I only use Valvoline regular oil. That's probably a little old school, but I've just always had great results and haven't been compelled to change yet! haha. Same with any gear oil, etc I need.
Thank you
My 07 vlx 600 goes to reserve at 170 k .
We're did you get your floor board I heard the Cobra ones with won't fit ..thanks for the info
Thank you for watching, Lance! They are Motorcycle Enterprises floor boards....I don't think they are in business anymore, sadly. I like these because they are hinged....much better fro hard leans.
@@dwcoffey I can't seem to find any ... Something about the cobras don't fit
MC Enterprises might still be around....I just did a search and found these: www.jpcycles.com/product/zz55164/mc-enterprises-driver-floorboards
Hi, are you still using valvoline oil?
Or can I use other brands as long a I follow the guide in this video.
Thanks for watching! Yes, Valvoline is the only oil I use.
@@dwcoffey hi, and thxs. Can you link me to it. I only see synthetic blend 10w40 on Amazon.
This is what I use: amzn.to/3i9VIWJ
Thanks again!
Hi, where did you get your Heel Toe Shifter?
It was made by Motorcycle Enterprises, sadly they are no longer around. Thanks for watching!
i do have one curiosity do you put the same oil you put on on your car or is a special oil for honda shadow
Thanks for watching, Alejandro! No, you have to make sure the oil you use in your Shadow is not marked as 'Energy Conserving' , see 1:43 in the video.
@@dwcoffey thanks you so much for your help
What oil drain pan are you using? I don't have the ACE, I just have the Aero, but I'm worried about ground clearance. If I put a dye in my synthetic, what stops the auto shop from putting dye in conventional? I would like to change my own oil.
Yes, I change all my own oil....at least I know what I'm putting into the engines. I got my drain pan at AdvanceAuto Parts. I'm sorry but I don't know the brand and the sticker for it is long gone. Thanks for watching!
Where did you get your heel/toe shifter? I have this exact bike and cannot find one.
Thanks for watching! It was on the bike when I bought it, but I think it came from Motorcycle Enterprises. Unfortunately, they are not around anymore.
@@dwcoffey Dang. Looks like I'm going to have to have someone make something custom I guess. Thanks!
Hi. I'm new to riding and wondering when you know it's time to change the oil. Ive got a 2015 Honda Shadow Phantom. Ive already put new short shot pipes on it myself and an oil change seems easy but just not sure when to do it.
Hi Amanda, thanks for watching! That's great that you've put your pipes on....I bet it sounds great! I change my oil every 3000 miles. I don't like putting an oil-change sticker on my bike, so I just leave a post-it note on my toolbox with the next mileage point.
Amanda, it depends on how many miles you do, I do mine a little sooner than Dennis, about 2500 miles, or the end of the season, like October, no matter how few miles I do. Did you adjust the carburetor for the new pipes?
Hey Denis I just got the same bike a weeks ago. I was wondering how many miles you get on your tank before filling up. Thanks
Hey Jordon, thanks for watching! I get 120 miles without going into reserve. I've never run it completely out of gas, but I suspect I can get another 35-ish miles out of reserve. This bike holds 0.9 gallons in reserve.
@@dwcoffey I figure about 45 MPG but I like to stop every 100 miles to fill up. I have to use high test, or I get really monsterous back firing..even with it I get a good deal of backfires..any clue??
Pls can you tell me how to get to the LOW OIL SENSOR CUT OFF SWITCH for my 02 Honda shadow ACE 750? I chAnged the oil last night and may have put lower than recommended by accident. Ive topped it off with the right amount but and my dipstick gauge is showing full but It won’t start. I was told there’s a low oil cut off switch but I can’t find it. I can’t find my manual. Thank you.
I'm not on the bike today, so I'll have to look when I'm home, but I 'think' it is on the right side, under the engine, next to the oil filter.
Dennis Coffey Thank you for getting back to me. Pls check for me when you get home. I can’t find it. Thank you.
I'm not 100% certain but most of the lower end wiring is behind the drive sprocket cover. It's easy t take off...I'd check there first.
Dennis Coffey thank you. I’ll check it and get back to you.
Hello Dennis I was wondering what's the brand of your highway bar on your motorcycle.
Hi Paul, I have a Cobra highway bar on my ACE. Thanks for watching!
I also did cobra bars.
Must be 2014 or higher Honda Shadow aero oil change. Where's the oil plug?
Not an American classic. The basic 2014 Honda Shadow aero oil change must be 2014, not American classic
Mine is a 2003 ACE. Oil plug is in the oil pan as shown in the video.
Yep, my bike is definitely an American Classic. 2003.
Is that oil plug washer rubber? Is it a crush washer?
Hey Robert, thanks for watching. It's a crush washer. Part number for mine, 2003 Vt750 ACE is 94109-14000
@@dwcoffey Sweet! Thanks for the response. That's the one I was hoping it was. Found them on Amazon. 20 for $6.99
Your reply made me go looking, I just bought the same set! Thanks!
@@dwcoffey Good stuff! Just got mine delivered yesterday. (Along with the oil, the filter, and new LED strips. Guess how I'm starting off the holiday!
Happy riding! And thanks again for all of your helpful videos. I've used a few of them already myself!
Man, I don't know how you made that look so easy. Mine is kicking my butt. I have zero room/clearance to turn my wrench. And if I try to use the jack (which is the same one you use in your video on how to change the tire) it completely blocks access to plug and filter.
How many litre oil need ?
the 750 takes 2.2 litres. Thanks for watching!
@@dwcoffey i am take in 2,6
Hey Dennis will this work for 1998 Honda Shadow 750?
Hey Alex, I'm not completely familiar with the 1998 Shadow, but it should be very similar, yes.
Okay thank you Dennis
Here's a good site for ACE Questions...You can become a Rat Bastard! forums.delphiforums.com/strictlyace750/start
Thanks Ted! I appreciate it and I'll check it out.