Build a Digital Stopwatch Using 4026 IC Step-By-Step Tutorial. Digital Stopwatch 60 Sec
Vložit
- čas přidán 11. 05. 2024
- Welcome to my tutorial on building a digital stopwatch using a 4026 IC. In this video, I’ll guide you step-by-step on how to create your own stopwatch at home.
The 4026 IC is a versatile chip that combines a counter and seven-segment decoding in one package. It’s perfect for creating a variety of projects, including clocks, timers, and our project for today - a digital stopwatch.
Circuit Diagram : drive.google.com/file/d/1kQ6X...
If you like to see my video then,
Please SUBSCRIBE to my Channel (INVENTIVE TECHNICAL SUPPORT)
and follow me into my social accounts, link is given below.
Thanks for watching this Video.
Facebook : / pallab.sarka. .
Instagram : / _its_015
Component Details :
1. CD4026 IC ( 2 Pis )
2. 555 Timer IC
3. 7 Segment Display Common Cathode ( 2 Pis )
4. Self Lock Switch
5. Push Button
6. 1N4007 Diode ( 3 Pis )
7. 50K Variable Resistor
8. 1K Resistor ( 2 Pis )
9. 100 K Resistor
10. 100 Ohm Resistor ( 2 Pis )
11. 100 uF Capacitor
12. 10uF Capacitor ( It's Optional )
13. 1 uF Capacitor
14. Some Jumper Wire
15. Bradeboard
Count 1 to 9 on 7 Segment Display Using CD4033 IC:
• How to Count 1 to 9 on...
Segment Segment Counter 0 to 9 Using CD4026 IC and TSOP 1738 IR Receiver:
• How to Make a Segment ... - Věda a technologie
❤
😊😊😊😊
👏🏼👏🏼👏🏼👏🏼👏🏼
Thank You 🙏
If I want to add at least one logic gate then where should I put it?
Thanks you again.
3 input AND gate should be used instead of three diodes.
What is the use of self lock switch kindly answer what if we use a push switch will. It become a counter?
yes, If you use a push switch, it will act like a counter.
Another question is, if I make 1 to 99 instead of 1 to 60 seconds then the circuit would be less complex?
Then these diodes cannot be used.
Bro mana Sara implement kia ea counter ban raha stopwatch nahi ban rahi
i have question sir why my circuit not counting?
what part of component use to counting the number automatically?
Check Circuit Diagram.
Link is in the description box.
Thanks a lot bro❤. But I have two question.
1/What if I don't use the preset? Isn't it just speed up?
2/Why you didn't use any logic gates?(i.e. AND, OR)
If you don't want to use Preset then you will use approx 4.7 Kilo Ohm resistor instead of Preset.
I used logic AND gate in this video.
In this circuit, three 1n4007 diodes and one 100K Resistor work as AND gates.
@@its015 Thanks for clearing my doubt
@@its015 ok. So if I use a 3-input AND gate instead of 3 diodes and a 100K resistor then the display will show 1 to 99. Am I right?
@@user-vv2ge4uh4c no,
If you want to Count 00 to 99 then no ned to use any AND Gate.
bro made it thanku so much but aik issue ha wo 99 tak ja raha aur after 60 digit break ho raha
Congratulations 👏🎉👏🎉 🤗🤗
I can solve this problem.
please text me an instagram, link is in the description box.
Bro i have used a simple switch so it becomes a counter if i use a self lock switch will it run automatically
Plus it is going to 99 instead of 60 but the number of 1 7 segment cathode is not displaying properly
How can i set this and restrict it. To 90
Plz answe
Check your self lock switch with the continuity mode of the multimeter. And check the seat of 1n4007 diode
Bro I have applied as you have applied on breadboard just one switch is used I will remove it with self control switch then let see