How to Replace Headlights 03-09 Mazda 3
VloĆŸit
- Äas pĆidĂĄn 27. 08. 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/19/ce...
1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights. This video is applicable to the 03, 04, 05, 06, 07, 08, 09 Mazda 3.
đ§ List of tools used:
âą Flat Blade Screwdriver 1aau.to/oahd/1A...
âą Phillips Head Screwdriver 1aau.to/oahd/1A...
âą Complete Metric Socket Set 1aau.to/orm/1AX...
âą Trim Tool Set 1aau.to/ooN/1AX...
âą Needle nose pliers 1aau.to/oms/1AX...
âą Needle nose pliers 1aau.to/oms/1AX...
âą Ratchet 1aau.to/oaiA/1A...
âą Socket Extensions 1aau.to/o4k/1AX...
For More Info visit us at 1aau.to/h/beq/
â DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
â *Watch the Video*
â *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
â *Do it Yourself*
â *Save Money*
I just replaced the headlights on my friends 07 Mazda 3. You can save a lot of time without removing the bumper completely. Just follow the steps except when you get underneath the car. You only need to remove the 8mm screws that are at the bottom of the bumper and no need to disconnect any wires on it. The bumper can be lowered enough to get to the two 10mm bolts that hold the headlights in place. The Phillip screw can be removed while the headlight is off. I did both in less than an hour.
How do you take the headlight out without undoing the Philips screw underneath it first though?
This is THE best âhow-toâ car repair video Iâve ever seen. The young lady does a great job explaining the process. No steps omitted. Video camera footage also excellent. Oh, and by the way, the 1A Auto Parts replacement headlights are very good. Thank you all for offering such good parts and this great video.
I have to admit, if it weren't for your videos, I would be reading the manuals. I truly apppreciate this lady in the video, she makes it seem so easy. I bought the parts for my Mazda 3 S Hatchback from you guys, and have replaced quite a few parts with a few of your videos. Appreciate it the videos so much. Thank You
All my bumper clips are broken, this is going to be a very easy install. :) đđđđđđđđđđđđ
Love this lady, love to watch how professional she is.
This video came in clutch for me. Thank you so so much for this! And the lady who did it all did a wonderful job!
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Joshua Benton
Thank you so much for this video! just saved myself about $600 by doing it myself, and it turned out to be so easy!
+kaptainkylie Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
For those who are stuggling heaps to get the clip back on the trick is at 11.35 she lines up square end on the headlight in between two nubs and this let's the clip travel a little further then if it isn't I really struggled to understand this on alot of over videos.
Thank you so much
I owned an 09 Mazdaspeed3 (very fun car) and the labor for installing these cost more than the actual part.
+Alexis Ledesma Thanks for checking us out. This is why we love to empower our customers to make their own repairs and save the cost of the labor going to shops. 1aauto.com
That was so satisfying to watch.
Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c +MrBuckaroo2014
What ridiculous design! All this just to replace a headlight!
Ronald Harrison yes. I tought i bought the right car âčïž
Honda is the same also. It is the same process for a 1999 Honda CR-V.
I know right? I had to really try to remove the spring on the driver side headlight lol. My poor spine
Excellent video, well done. Step by step start to finish. Thanks.
Thanks to the view at 11:47 I finally understand how that damned clip for low-beam bulb works. I always struggled with it while replacing bulbs. I hope now I will be able to do it faster.
+Gothar_svk Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
It sucks that's it packed so tight. I generally go by feel.
The reason they make this so complicated to change a light bulb, is to get you in the dealership so you have to give them a lot of money.
That was my hunch. Same with the cabin air filter in these.
Thanks for the great videos. Sue has helped me so much with my car it's insane
+@AudreyGraceB Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
Designed to make your life difficult. They could've designed this to me much, much easier to replace. Difficult by design. Thanks, Mazda.
I loathe changing my headlight bulbs.
Just to take out a headlight I have to take apart the entire front of the car!!!
By to change the bulb, you can do that from inside the hood.
To replace the headlight assembly, youâll need to do all this.
The video is named VERY poorly.
For bulb replacement this is a necessary step if you have factory HID bulbs. There is not enough room at the back of the lens housing to remove and replace the bulbs without shifting the lens forward and that requires removing the bumper.
Itâs too bad you need to removed the engine & trans, to get to those headlights
seems to have a tough time with the push tabs lol
Is there a kit that comes with all the wrenches and screws Iâd need just for car diys like this?
Are you serious do I seriously have to take out an entire bumper to replace a headlight
Its a pain
Okay I literally just did replaced both of my headlights in record time. I think it took me 3 minutes for the driver side and 4 minutes for the passenger. The thing that helped the most was that it's bright outside. Last time it took me half an hour because it was dark and I was using my phones flashlight. Never again will I do that. Super easy in broad daylight!!
@@SlampthChompth so you didnt take the bumper off? How did you access the bolts to remove the housing?
@@ke6533 I think Caleb is talking about changing just the bulbs.He's confused.
@@ke6533 sorry I was just talking about the bulbs themselves.
To remove the headlight assembly, simply remove the engine first to get access.
This is a design problem.
Are the hatchback and sedan headlights a match? assuming they are from the same year ?
No the sedan has a more pointy slimmer housing as the hatchback is more curvy. I have an 09 mazda 3 hatchback and I can use mazda speed ones but not sedan ones
Now if they just made the lenses glass, no one would have to do this!
Well done video. Thank you!
Just Drill 3 Holes Into You're Bumper On Each Side To Access The Screws An Bolts
... Changing Headlights Will Be a Breeze From Then On
Plus You've increased Air Cooling
đđđđđ
The original headlights were not in bad shape they just needed to be mildly restored and it would have been just fine. I'm guessing it was just to make the video
07 Mazda 3 with adjustable headlight tilt the same? Not actually sure what moves while adjusting from inside the cab, if it's the headlight brackets or bulbs or what?
GĂ©nial
Merci pour la video
Why are headlights different from mazda 3 & mazdaspeed 3? So complicated. Should make replaceable custom or factory headlights readily available for 07-09 mazdaspeed 3 also. When i do find a new pair, it would cost way over $200 a pair!
+Marlon Burgos Thanks for watching! That would be convenient, but unfortunately the sedans and hatchbacks use different headlights. If you have a Speed model just make sure you purchase a set for the hatchback model. You will also want to make sure you purchase the correct style for HID or halogen depending on what you have. 1aauto.com
Why my mazda 3 when i put in high beam my headlight,its just wider the light not go straight?please help me
ohhh of course the hatchback lights are more than the sedan......great!
Would I have to use the stock lights or can I put new LED's in?
I used LEDs
If I'm only going to change one, how can I adjust the lights so they are at the same level?
+santiago frade Thanks for watching! We have a video on how to properly aim headlights here: czcams.com/video/GWvSWBlAwnI/video.html
Volkswagons were great if only because replacing things was very straightforward.
What? I had to do the same thing with my Jetta; take off the whole bumper and all.
OMG this is such a palaver, and I've already bought the replacement headlamp....
all of this for a light bulb change, great Mazda
Thanks for checking us out. 1aauto.com +abdra dembele
abdra dembele Fr smhhhh
not for the bulb.... you can reach your hand behind the headlight assembly to get the bulb out. what she's showing ia a video on replacing the whole headlight assembly. She reused the old bulbs because their not blown out :|. Now for the current model Mazda 3 you do have to take off the whole bumper from what I understand.
to get the headlight bulb out all you have to do is first disconnect the headlight connector, pull off that round rubber moisture guard around the bulb connector then pull out the bulb take off the second connector pop in your new light and opposite of removal for reinstallation.
Mazda needs to do better in accessing headlights. It. Shouldnât be so much work!!
what is the part number for both said plz it's not mentioned in your website I want to match before buy
+silver rain Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/2004-09-mazda-3-headlight-pair/i/1alhp00437?CZcams&VsKwI3SDfl8
What the lamp number?
Dang all that work to change a headlight đŁ
Thank you for movie
They don't tell you the cost to replaced they don't want you to shock you!
Its always easier with a hoist
Why so difficult ?
666 likes better make it 667 good info easy to understand
Exelent
How bout video to replace lens only
+Andrew Harbuck We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
Seems like half the steps you donât need to do.
"Lol at a great price".... Those original oem assemblies are stupid expensive. Better off buying aftermarket parts that cost half the price AND look better most of the time.
đ
the heck cars are like apple computers, you need to change the light bulb , need to drop and remove and replace bumper... what next you need an oil change? remove the motor turn upside down, use model a pentalobe funel that dealer supplied to change oil . tap gas clutch 3x turn off 3x and pray to buddha that you all did it right.
I reckon this comment is just a joke but it isn't for changing a bulb, but the entire assembly.
You do have the option of turning the car upside down to drain oil
camera angle terrible
Pain in the ass .
LOL! What a POS design.
Hate it when they show you stuff like opening the hood.