griff you and the staff need a obe from the royals ,, no on else would ever give away all this info to the general public you are absolutely heroes /heroses !! love you guys /girls !
Guys! I have to tell you; the new CZcams clip is awesome as always So nice to see how you all help the community. Keep up the good work and I hope the community will reward you for all that afford 🙏🏻🙏🏻
Got so much info of these guys but time to take it to them as problems with idle and took it to local mechanic and the sprag clutch is now knocking sometimes upon starting so need it fixed for the summer.thanks Tommy.
My gen 2 has -1 +2 and dam it feels great, dam it made me want to try longer pipes, actually running mivv GP carbon and i do feel bad fueling without the dbkillers off, but longer pipes, airbox and those custom headers must give insane power
Looking forward to your third video for gearing. I did drop my front Gen 2 sprocket from 16 to 15 and LOVED IT, but have been wondering if I should change the rear or not.
On your up grade parts I noticed a honda side stand which I have bought for my gen 1. Have you done a video on why it's a good change. Many thanks Andy.
Hello dear Sir I see on your web shop the big bore kit for the Gen. 1. when i buy this big bore kit you can less the english vat ? I living in Switzerland. Many thanks!
If i understand you correctly then people who prefer to drive with short exhausts would benefit the most from the scaveging mufler system? Or does it also improve when you use a regular longer exhaust? Did i understand it correctly that this modification does not improve top end power?
does 15 fit and not damage the swing arm on the gen 1(normally 17)? I have a 15 but not sure if that is too small to work properly without damaging anything. Thanks
Hey guys! i would really appreciate some info on where i can buy said powercommander for my gen 1 tuono. I simply cant find it on the internet. Please help! thanks in advance!
My question is when you put an air filter with more dont u need to remap the bike. I have an 14 aprilia shiver (vtwin) do u have a power comader for this bike? After fitting an after market dna then it ran so lean when i dyno’d it i had to put the old one back
HAPPY I FUND YOU GUYS THANK YOU FOR BEING HERE
griff you and the staff need a obe from the royals ,, no on else would ever give away all this info to the general public you are absolutely heroes /heroses !! love you guys /girls !
Where's the part 3 ?
I guess it's not been uploaded yet.
I guess I forgot to say thank you, great video.
These boys are honest to goodness professionals.... 👏
Guys! I have to tell you; the new CZcams clip is awesome as always
So nice to see how you all help the community.
Keep up the good work and I hope the community will reward you for all that afford 🙏🏻🙏🏻
Just bought a gen2 and I think I’ve bought a fantastic example of one hopefully
It’s a gen1 actually
Thanks! Looking forward to doing to chewning.
Brilliant vid, I'm quite new to apes and love all this knowledge sharing! Cheers!
Got pretty much all of this on my Gen1 and it makes a fantastic difference. Great vid, thanks team AP
Got so much info of these guys but time to take it to them as problems with idle and took it to local mechanic and the sprag clutch is now knocking sometimes upon starting so need it fixed for the summer.thanks Tommy.
A first time Tuono Gen 1 owner here, thanks a million for the great input! Subscribed ;-)
Another good vid. Cheers all👍
Content is brilliant. Can you please film a video - how to switch the front turn signals into leds? ✌️
Great info.. just bought a 2002 gen 1 which I absolutely love! I just need to investigate which mods it’s already had now... brill channel 👍🏻
❤
My gen 2 has -1 +2 and dam it feels great, dam it made me want to try longer pipes, actually running mivv GP carbon and i do feel bad fueling without the dbkillers off, but longer pipes, airbox and those custom headers must give insane power
Looking forward to your third video for gearing. I did drop my front Gen 2 sprocket from 16 to 15 and LOVED IT, but have been wondering if I should change the rear or not.
Great comprehensive info 👍
Awesome content Griff. Thanks for sharing your knowledge, just wish you were in the States 🙂
Great info, looking forward to the rest guys 👍
Great video! I am gonns check my gear ratio tomorrow! My bikes rides very shit at 2-4k revs...
On your up grade parts I noticed a honda side stand which I have bought for my gen 1. Have you done a video on why it's a good change. Many thanks Andy.
Griff super video full of info thanks pal.
spot on once again BOOM
Was there ever a pt.2 for this on the gearing changes? Cheers
mmmmmmmmm bike parts 🤤
красавчики! жаль в Россию не отправляете. купил бы eprom и еще несколько позиций
Hello dear Sir
I see on your web shop the big bore kit for the Gen. 1. when i buy this big bore kit you can less the english vat ? I living in Switzerland. Many thanks!
If i understand you correctly then people who prefer to drive with short exhausts would benefit the most from the scaveging mufler system? Or does it also improve when you use a regular longer exhaust? Did i understand it correctly that this modification does not improve top end power?
Part 3!
does 15 fit and not damage the swing arm on the gen 1(normally 17)? I have a 15 but not sure if that is too small to work properly without damaging anything. Thanks
How to get in touch with you guys??I have aprilia rsv 1000 2001 i want to make it faster my ECU chip is rp58. Thanks 👍
Hey guys! i would really appreciate some info on where i can buy said powercommander for my gen 1 tuono. I simply cant find it on the internet. Please help!
thanks in advance!
I couldn’t find these headers in your website ?
I am interested in the air box for the gen 2 and the rear sets and the pipe with the scavenger pipes for gen 2? when funds alow i will be ordering !!
When you drop to a 15T front sprocket on a Gen 2 do you need to cut the chain down a link?
No the standard 106 link chain will still fit !
My question is when you put an air filter with more dont u need to remap the bike.
I have an 14 aprilia shiver (vtwin) do u have a power comader for this bike?
After fitting an after market dna then it ran so lean when i dyno’d it i had to put the old one back
Is it possible to run Quickshifters on a gen 1 and is it recommended?
It’s possible, healtech and Gabro make them for the gen 1
no airfilter is bad on stacks?
does the gen 1 tuono run on carbs?
no
15/42 15/42 15/42 . Need it again then ? Allboutdat middle mate .
does 15 fit and not damage the swing arm on the gen 1(normally 17)? I have a 15 but not sure if that is too small. Thanks
Hi, Is this collector mod for both series 1 & 2 ? I have Tuono 2 Gen
If you have any questions please drop us an email ... really happy to help
Hi can I just install the open airbox on my gen 2 and ride or does it need mapping or anything thanks
Bolt straight on is ok .... but will always benefit from bespoke mapping !!
@@APWorkshops ok sound. What sort of price is a dyno session thanks
@@waynewarwick3055 please give us a call at the shop we csn book that for ya !!
That reminds me...Wtf ever happened to sonic (fast bikes journo)?! Was he ever found?
I never did hear and outcome on that one .... hope he’s safe
Cant see the pipes on website!?
I also cant see them
Just found this site and noticed your comment RSVR.NET, knew Paul when he owned it, great to see yourselves keeping things going.
That reminds me...Wtf ever happened to sonic (fast bikes journo)?! Was he ever found?
He was taken prisoner by ISIS..John Cantlie