Video není dostupné.
Omlouváme se.
SATA® RPS™ Cup System + Cup Trick Shots
Vložit
- čas přidán 14. 11. 2018
- SATA® RPS™(Rapid Preparation System) is the cup system for bodyshops emphasizing perfect painting finishes and high efficiency. SATA® RPS™ facilitates the painters’ work, significantly enhances the bodyshops’ productivity and critically reduces the use of cleaning agents and solvents. Learn more about the specific features of SATA® RPS™ and the advantages you will have!
I used these for the first time and the clear started running out of the top of the cup when I had the vent open. Almost ruined my paint job
If you tipped it all the way upside down, you should be using a feed hose to pressurize the cup, that way you won't ruin shit, 😂.
This is a stupid video. You wouldn't need the tilt feature if the cups were not flawed with that hole that causes them to leak all over when tipped past a certain point. There was one setup I came across that had a sippy cup type seal (one way valve) that allowed air to pass into the cup but nothing to pass out. Now that is something worth showing off but not this. Sata RPS cups are the worst of all disposable solutions just because of the breather hole that allows them to spill all over if not careful.
Best product ever !
I would love to work with you :-)
Excelente seria se não fosse descartável. Isso o torna totalmente inviável, infelizmente.😔
That just looks like another spot to leak from.
suuuper👍👍👍👍👍
Why is it with the absolute pinnacle of German engineering available to SATA, they are unable to make a simple plastic cup system that doesn't leak everywhere? I am forever cleaning up the mess that's created when the stupid popper caps clog slightly then leak or don't pop on properly. If it's not that, then it's leaking caused by the top not screwing on properly. Sort it out SATA, this junk is terrible for your brand.
Sata cups are absolute junk.