BMW E36 V8 M62 Swap First Start and Test

Finishing touches on the BMW E36 V8 M62 swap:
* Installing the PMC gearbox adapter plate
* Finishing the fuel system (we going to need to add surge tank later on...)
* Coolant system (VW reservoir, E46 + E36 coolant hoses for the radiator)
* Hydraulic system
* Sachs performance clutch + pressure plate
* ZF 5 speed 320z gearbox from E36 328i
* Instrument cluster: LD Performance + oil pressure sensor + coolant and oil temperature sensors
* Changing from water cooled to air cooled alternator (timing chain cover needed)
* Oil sump / pan installation + the oil pump
* Complete exhaust system - OEM E53 X5 exhaust manifolds, with little bit of modification on the driver side manifold and changed connection ends, so to be able to install the steering column. The rest is straight pipe
* Engine mounts: from BMW E34
* OEM automatic flywheel modification
* PCV system bypass
* Secondary air system bypass
BMW E36 M62 Swap Part 1 Oil Pump Modification: • BMW E36 V8 M62 Swap Oi...
BMW E36 M62B44TU 286 HP V8 conversation / swap.
*The car is going to be made for low budget race / drifting, so the OEM standards are kind of low!
Support the channel : / crankauto
Shop coordinates ( for business inquiries ) : / crankauto
CRANK

[@iconicars3050]

This type or project is never ending headaches, i respect that you took this job 👍. I wouldn’t 😂

[@VLOGISGARAGE]

top

[@adigerlaprasad5348]

Love crank💐🇮🇳

[@DG-od4si]

👍 👍

[@1pizzadox632]

Супер е!

[@capncook8608]

What wires from the ecu give the signal to start the engine

[@capncook8608]

Is it possible for u to show me what pinouts did u use to get the motor to start into another car

[@urmaritoryoutube8559]

👍😎💪

[@Nico_335i_DCT]

Wow, guys. That's a great drift car. Is it tuned? Dutch regards Nico.

[@crank3646]

Thanks Nico! For now is stock

[@GyunaydanAhmedov]

there is a strange knocking 41:30 min

[@crank3646]

Hydraulic lifters