How Does Dumper Truck Differential Gear Repair || How to Replace a Rear Differential Gear Pinion
Vložit
- čas přidán 27. 08. 2021
- How Does Dumper Truck Differential Gear Repair || How to Replace a Rear Differential Gear Pinion
#Repairingdifferentialgearbox #Replacingdifferentialgearpinion #Reardifferentialrestoration
Notice the impeccably clean work area.
😂😂
Isn't it beautiful their real professional probably a fist full of grit in the bearings when reassembling
It'll be back in for new bearings soon.
Good job, Hard working and honest people always get ahead, congratulations it helped me a lot. I'm sure they have impact tools now. God bless you guys
I have to remind myself after watching these videos, that the good people over there are fighting every day to keep warn out trucks rolling down the road.
We are quick to judge how they choose to sit on the ground to work. But asking them to stand up and use a table would be like asking us to rebuild a differential on the top of a ladder.
Cultural habits going back 1000’s of years won’t just go away.
I applaud these guys for their hard work and skills.
We in the west will never understand their struggles.
The last line of your comment prompted me to post a reply. I am from the 3rd world and my father used to have a benchless shop too. Here's an edited copy-paste of my reply to a guy in another video regarding workbenches or proper tools for that matter.
It all boils down to economics. A workbench in the middle of the small workshop they have will restrict their movements. On the other hand, given that they have enough money for them to afford to get a bigger workshop, it still wouldn't be wise to do so since that would jack up the price of their labor leaving their customers unable to afford their services.
I caught a glimpse of their workshop in the background in this video and it's almost full of anything relevant to their work. Probably just big enough to house their compressor, welding machine, and whatnot when they close up at night. A space that would probably only be enough for a trash bin in the west. But for them, it's an all-purpose space.
Did you notice the kid? My bet is he's a "freelance helper". He hangs around the area and any shop that may have just received a piece to work on can call him and he gets paid after the job is done.
Then he hangs around some more to wait for another shop to call him, be it a tire repair or radiator repair shop, etc. I wouldn't be surprised if he's a jack of all trades and the different bosses he works for were "helpers" in their youth and are now shop owners.
I also mentioned in the other video that one of the reasons why there are mountains of repairable stuff in the west rotting away in the landfill is because it's cheaper for them to buy new ones than to have them repaired.
Yes, there are people in the west who salvage stuff from the dump to restore but that is mainly as a hobby and to get satisfaction from restoring things, while these people would see the same heap of junk as food on the table.
What I'm saying is it's not a cultural thing, it's economics.
@@edwinso8173 well said!
People are quick to judge!
Visit a small farm in the US. People working on 50 year old equipment right where it breaks, in the dirt.
"We in the West" understand the struggle. At least some of us.
He'll yeah. Farmer from Kentucky here....you Gotta Fix it, you can't afford New Shit.
Judging by the amount of sealant on the housing when they took it off that's not the first time the diff has been repaired. Looks like the backlash was never set which has caused the second failure but the lack of pinion seal and poorly installed bearings means it will be back again shortly. At least they get repeat business.
да молодцы ребята , новые детали прям в грязь в песок спецы ничего не скажеш, браво......
Предварительно обмазав солидолом. Чтобы побольше налипло.
Там еще был прикол. Выпала прокладка, совсем новая. Видать вчера поставили да болт потеряли, а его и зажевало. Вот сегодня клиент и вернулся.
Даааа... Спецы еще те.
При сборке сальник на хвостовике прошляпил поставить и дальше продолжил собирать
регулировать тоже не стали - само притрётся)
Nice hat at 21:20 🇨🇦
lets rebuild this right here in the dirt. all the same, I still love these guys
Very good work , hard work with small tools , poor mecânic , God bless you, congratulations Brásil
I am continually amazed at how you can get these repair parts apparently so fast. And at the work you accomplish with the most basic tools and no decent work shop.
There are small factories/workshops near by who manufacture parts so readily available otherwise there is no way of getting parts so quick you are right. Amazing technology is one channel where it shows them manufacture crankshaft and then deliver on back of a rickshaw to shops or garages.
с песочком самое то, чтобы через пару месяцев он еще раз приехал на замену
Пакет подложили, молодцы.
No wonder they are happy they sound like Alvin and the chipmunks.
представляю сколько они пока делали песка накидали в этот редуктор
What is it with you guys working in the dirt and all the trash on the ground.Have some pride in your work area.
Super video! Good job! 👍😎
awesome guys...👌
son unos genios y como trabajan muchos tendrian que aprender
5:51 use of the Pakistani castle nut socket/spanner, i.e. hammer and chisel.
Great 🎉🎉🎉🎉
Mantap 👍
The pinion bearing was knackered, but hopefully the truck will be far away when they find out.
And that fat master mechanic forgot pinion seal
Surely, they'll be taking the time to properly torque down those bolts to the required specifications, right?
وہ کتنے گندے ہیں کام کرنے کے لیے .. !! --- اور بچوں کو ان جیسا بننا سکھائیں .. ؟؟ ... وہ طالبان کی طرح ہیں اور وہ اس طرح مرنے والے ہیں .. !!
Wrong.
Didn't you see him using the torque hammer?
Can't someone send them a table or two so they can work up away from the dirt. Or I've seen them welding maybe they could weld something together with all the metal that's around them?
Mr. Morris: requieren también una llave de torque para ajustar todas las tuercas, a los valores de fábrica y con el manual de servicio en mano, grandes llaves para evitar lo que se ve en el minuto 18, donde con golpecitos, intentan trabar esa tuerca. Pero en fin: hombres valientes y trabajadores.
I has to be tough on their knees, get bench a chair
i will go in 4ths with You Richard, Chuck , and German . Lets all chip in and buy a decent workbench to keep that differential out of the dirt
@@danneumann3274 Dan, they would just take the legs of the table and lay it in the dirt. But at least they would have a cleaner surface to work off of rather than a used piece of cardboard box???
Muito bom
А сальник на хвостовик?
зачем?
Нахуй он там нужен? У них подшипники сухого типа.)))
From Indonesia👍
Шалом , брат ! Маска не обязательна и даже вредна для вашего здоровья.
How much more do they charge for the added grit and sand they add to the bearings and other precision parts when making a repair?
мне вообще интересно , куда эти аборигены лезут , не имея ни малейшего представления об устройстве этого механизма...
В стране полно мусора, а они картонку не могут постелить хотя бы
I can hear the older guy now telling the kid with the pipe on the end of the wrench being told, "Come on Kid PUT your weight into it"!!
Todo bien en CZcams
Very clean work area that good for anther 100000 miles not
Ich wollte wirklich nicht, dass diese Leute mein LKW reparieren.
¿¿ porque trabajan en el suelo ?- mucha tierra - no usan una mesa de trabajo ????
👍👍👏👏🇪🇨 desdé colombia ❤️👌👌👌⚒️⚒️⚒️⚒️
وہ کتنے گندے ہیں کام کرنے کے لیے .. !! --- اور بچوں کو ان جیسا بننا سکھائیں .. ؟؟ ... وہ طالبان کی طرح ہیں اور وہ اس طرح مرنے والے ہیں .. !!
They don't need Torque wrenches, they Know how it feels Tight.
I like that torque wrench.tight and really tight 😜
they wont live long, getting lots of gasoline over theyr skins all day. Use blean table to clean parts, gloves, and torq rench to make it to fabrik spec
Хаха, это Индия
Belo trabalho...
I’ve been watching quite a few of the Mechanic videos. Realizing that where they are in the world seems to be a poor country. They have basic hand tools. No rat he’s from Snap on etc. no impacts. They fix everything in what ever is available to them . It show that us Americans are a spoiled rich country that is in a throwaway society.
victory has defeated us
These videos are from Pakistan.
Visit a small farm in the US. People working on 50 year old equipment right where it breaks, in the dirt.
There is a whole subculture of people getting it done, daily, not too dissimilar to the methods in this video.
Spoiled and rich my ass.
So how long do you think those bearings will last without being greased? This isn't the first video iv'e seen where they completely seem oblivious to the need to re-grease components.
You don't grease bearings in an oiled environment.
@@dquad Spot on.
You don't grease them, they'll be submerged in oil but they're knackered anyway so wouldn't really matter either way.
@@dquad These parts go together much easier with a light coat of oil...
Mais tarde
😅
assistir mais tarde 😊
they realy shud buy a torq rench, so they put it back to speck.
that is not necessary .... they have enough experience and there is a torque wrench in their muscles....
وہ کتنے گندے ہیں کام کرنے کے لیے .. !! --- اور بچوں کو ان جیسا بننا سکھائیں .. ؟؟ ... وہ طالبان کی طرح ہیں اور وہ اس طرح مرنے والے ہیں .. !!
They really should buy a torque wrench , so they put it back to spec.
I mohio nga powai taraawa mahi..ka kino ke..whaka-tika hia.. ano ..ka oti..te mohio-tanga, te awhi..tautoko..Pai te titiro aie.. kaapai presente 🦾✌️ Kia ora 🙏🤙👍
Nada que um pouco de areia não resolva. 😬
U nas NIGDY nie naprawia się piachu (na gołej ziemi) podkłada się chociaż PALETĘ.
What about a pinion seal? Doesn't look like they put one in!!!
انها جريمة بشعة في حق الميكانيك 😂😂
Its obvious, why they are working on the ground. They don't have impact wrenches and require a lot of leverage and force to remove those bolts. That differential looks very heavy and unwieldly. Very easy to maneuver on the ground. You would need to winch that diff onto the table. A very heavy and strong table would be required to carry that, even then it would need to be strapped down to keep the diff from rolling off. It would just slow the repair down. I agree they should cover the ground better, less chance of getting dirt into the diff. This is like shade tree mechanic work, due to to lack of money.
What a joke how these people work. Anyone with basic mechanic skills can put it back together. It will fail again as nothing was properly done. You should just throw some dirt in the housing as well.