Philips LatteGo 5400 series initial Review
Vložit
- čas přidán 11. 10. 2020
- Here's the link to the unboxing video and setup video: • Philips LatteGo 5400 s...
Please give a thumbs up if you like the video :-) It takes a lot of work to create these and I don't earn any money with it at all.
Here's my initial review about the LatteGo 5400 series coffee machine I recently bought. Please brew about 4 coffees when you start using the machine. I didn't create any chapters for this one because I would highly recommend you to watch the entire thing!
Then you can really judge about the taste. And please do yourself a favour and spoil yourself by buying a good coffee brand.
Let me know if you have bought this machine too and what you think about it.
If you like this video I would be very happy if you could support me with tip: www.buymeacoffee.com/cat3d
Es würde mich unglaublich freuen wenn ihr mich ein wenig unterstützen könntet: Amazon 🇩🇪 amzn.to/3lgwQwl
Big like for the experimental nature of this review, well done!
Thank you so much 😊
Great, honest review. Thanks Cat3D.
Thank you very much 😊
Thank you so much for the very detailed review!
Thank you so much for your kind reply 😊
Thank you so much for the thorough demonstration, now I am ready to purchase the 5400. I had been looking in replacing my third Keurig with an Nespresso machine, but luckily I did more research and found this Philips machine.
Please let me know what you think about it once you are using it. I’m still very happy with mine
Thanks for the review. Short and to the point
😊
Thanks so much for this great review. As you said, they're hardly any reviews on this machine, so this is wonderful finding your channel. I've already started looking at other of your pieces and I want to comment that you do great videos
Thank you so much 😊 Great to hear that you like it.
@@choschiba are you still happy with it? I just ordered one ! You helped me decide!
@@davidgid Yes, I really am.
Thanks very much you are kind and pleasant. Thanks for going into trouble of explaining everything. I think Philips should really consider with awarding you with something just for marketing and promoting this product to everyone :) You covered everything about machine and I learned more than any Philips specification page or their videos could show me. Thanks once again!
Yes, that would be really nice. Those reviews are a lot of work. Filming and editing is very time consuming
As always, a very nice Lady who does a superb job reviewing! Danke und viele Grüsse! :-)
Oh, danke vielmals 🤗
Great job Cat! I might need to grab one of these. That Milk thing is really awesome!
It really is.
Grate Video explaining all in detail thanks a lot
Thanks for that Big review
Thank you so much for your kind reply
Good review. You cover well the majority of things people are going to need/want to know.
I've had my Philips LatteGo 5400 coming up for a month now. The only problem I've had is the power cable at the back. It worked loose & turned the machine off. But that was only once & I quickly figured what was at fault. I'm enjoying the machine though drinking too much coffee because of it.
I had exact the same problem. But then I discovered that you have to push the power cord really firmly inside to the socket of the machine. Now it’s rock solid.
Good review!
Thank you very much 😊
Thank you very much, ur video was very helpful as I am interested to buy this model.
Thank you so much 😊 dear Ayman. That makes me very happy as it is a lot of work to record and edit the videos. And I don’t earn any money with it.
Gracias por la review, sobretodo en el apartado técnico, configuraciónes y ajustes.
Muchas gracias por el lindo comentario. Eso significa mucho para mí. Se necesita mucho trabajo para crear un video de este tipo.
@@choschiba lo fàcil es hacer los 12 tipos café y decir que sale muy rico... pero lo interesante por poner un ejemplo es ver la lista disponibles de idiomas, el problema técnico de la junta del filtro, o que quedan restos de leche en el tubo, esos detalles aportan más de lo que parece, y así asumir lo bueno y lo no tan malo antes de comprar cualquier producto, usuarios como usted hacen que CZcams siga siendo interesante cuando buscas información detallada, great job 👏🏻😜
Muchas gracias. Siempre me gusta ser realmente honesto cuando pruebo y reviso cosas.
I have this machine for little over a month now, and I love it.
Great to hear. I enjoy drinking my coffee every morning.
How are the milk-based drinks? Is the milk hot enough? How's the milk foam? Can you adjust the amount of foam? Thanks!
@@H-RutherfordHill I usually drink my coffee with a lot of milk, it's hot enough for my taste. You can adjust milk dosage in every recipe. The foam depends on the recipe. You can not adjust it directly, but the cappucino foam is a bit different from the latte foam, I think. Could be wrong.
I usually start the day with a Caffe Latte, with extra shot (double) coffee, on very short water and a lot of milk.
For my taste it’s hot enough. We are even using the lowest temperature settings as the higher ones are to hot for us.
We do, however miss a touch-display, and like you, we miss navigation scrolling without repeated key-presses.
PS: We have gotten 1 (the included) used-water tray exchanged through Philips support - because of a small hole, causing it to leak water - so if anyone has problems with water leaking,it can be due to this!
We also purchased it after watching your review. Other reviews do not show how to take it apart for cleaning etc. Thank you!
Thank you so much 😊
That was a fantastic review and demonstration! For those who cannot purchase this one, like me, the 4300 LatteToGo can be purchased instead, like I did. The extra shot can be emulated by making an additional ristretto shot. And the other drinks that it doesn't offer can also be emulated.
Thank you very much for sharing the information 👍🏼😊
Would you happen to know how to emulate a caffe latte?
standard measurements for a latte on the 5400 would be 60ml coffee and 140ml milk. and you can up the coffee length to 75 or 90 ml, and milk amount to 200, 270 or 340 ml. I think you don't get those exact ratios on the 4300, but can probably get pretty much the same thing by adjusting the cafe au lait preset, or doing an epresso and then milk froth seperately
Thank you for sharing. I’m not a Latte Macchiato fan. So I‘ve never played around with those settings
I have been contemplating over the Phillips 5400 and the Gaggia Magenta Prestige as to which one to buy. The name and history of Gaggia was a great pull but then I discovered that Phillips also make Gaggia I have decided to go for this machine after your very nice and patient review. The Phillips to me also seems to have a larger presence on the worktop which I like.
Looking forward to hearing how you like it.
It seems the gaggia' s are quiter overall, most likely due to built quality and the grinder
Thank you for your video. I hope you are still enjoying your espresso machine.
Yes, I do. ☕️😊
Nice rewiev thank you very informativ.
I bought the 4300. You mention that the milk does not get diluted during the cleaning procedure, but that's not the case. If you remove all the milk and proceed with the cleaning, you will notice some water in the LatteGo compartment.
Thank you for the video, it led me to purchase the machine and I appreciate you taking the time to inform us all.
You are right. That’s why I have covered it in my next video where I show the maintenance of the machine: czcams.com/video/TRoSHSsijBY/video.html
This review made me buy the machine! It comes tomorrow and I can’t wait for it any longer! The first machine where it’s easy to make a cappuccino, i have tried many machines ( Nespresso, Siemens ) but it’s always a mess when you Quik want to make a coffee with milk. I will let you know how my coffee taste ! Greetz from Holland
Please take your time to fine tune the different settings for each coffee composition. And initially brew about 3-4 coffees that you just pour away without drinking them. Looking forward to hear how you like the machine.
We love your review. It really gets to "the details". We actually did buy this machine, partly because of your review (and partly because Philips made "a good deal", 25% off an okay pricetag). We also feel lucky, that we did buy a Philips and not a Delonghi. Mainly because we later discovered that the Delonghi wasn't very "intuitive", in normal situations, where the Philips can handle many of these situations - due to better rhought-out UI-programming!)
We do, however miss a touch-display, and like you, we miss navigation scrolling without repeated key-presses.
PS: We have gotten 1 (the included) used-water tray exchanged through Philips support - because of a small hole, causing it to leak water - so if anyone has problems with water leaking,it can be due to this!
Thank you so much for your nice post 😊 Mine doesn’t have any water leaking. Can’t understand how this could happen as my tray is made out of thick rigid plastic. 🤔
Who knows if they might offer a Pro version with a touch display one day. But I guess that would increase the price a bit.
@@choschiba also my thought. The only explanation I have for the hole, is that the tray has weak/thin spots. I can send pictures of the hole and tray, if you want it (when discovering the water-leakage, I thought that I would need pictures, to document this strange fault to Philips (and to help them improve their design), but the person didn't want this). Again, our second tray, is not leaking - so maybe it is a "one and only" case. But it did make us think: "what if other "design-flaws" exists inside the machine - and we later will experience water/grind-leakings? [so far, we have decided to pay for an extra insurance, securing us 4-years of use - which then hopefully will cover us, if other design-flaws etc. surface!)]
(the hole: is quite small - and as such, it wasn't leaking all the time! .. 3 days passed, after installing the machine, before water leaked - and when we "(immediately) tested to find the leaking-cause" the leaking stopped before the tray did empty! (strange, because when I discovered the leak in the morning, the tray was all emptied from water!).. And, it was first when we put light from a pocket-flashlight, that we saw "light coming in", and could "see" the hole ... funny though, is that the hole is "at bottom-level" .. so water should leak "all the time" / after the first day! ... but, pressure etc. could be an explanation). ... [And, as a positive thing, such a fault will/should show itself quickly - and we didn't have the machine on a wooden-table ... so no damage, in our case! .. and machine-warranty is then a sure thing! ... but I did have to go through all the "standard-questions" by a sceptical support-worker! (have you "over-filled the tray"?, "did you wave it, while removing water?", "have you over-filled the water-tank?", etc. etc..)..]
Ensuring against water-damage: After this experience, we luckily found a tray, that measures appr. 35x50cm, which secures us from any water-leakage to the kitchen table, from the machine (up to appr. 0,5L).
The solution could be "better looking", .. but a solution was needed! ... and the metal-tray makes "the coffee-place" look "industrial" or like we have a "coffee-shop" ..
And, daily use is now a breeze .., for instance "taking out the tray" and "putting in the water-tank" - without worrying about spillage ....
I always buy an extended warranty nowadays. So I also did when I bought this machine
Hello,very good review! Its help me a lot to make an decision what coffee machine to buy.. Today I have ordered the same model and will be delivered tomorrow 🙌🏻🥰
Cant wait to prepare coffee all day😁😁
Thank you 🙏
Greetings from Bulgaria 🇧🇬
Hey cool. Hope you like it as much as I do.
Здравей Ваня, доволни ли сте от Philips 5400 до сега? Някакви съвети, проблеми забелязани? Предстои ми покупка и се насочвам към нея.
Благодаря.
@@amkprofile Здравейте Александър. Много съм доволна от машината. В къщи сме големи любители на кафето и си търсехме нещо ,което да задоволи нуждите ни-хем хубаво едпресо,хубаво мляко за капучино хем сами да избираме какво кафе ще пием. Пяната за кафето става много креместа и хубава. Съветът ми е да използвате стандартно прясно мляко ,а не тези които ги водят “истински” от малки млекарници като Вършец-не става пяна с тях,което е доста странно. Ако използвате разтителни млека ползвайте тези на които пише barista.
Относно кафето-гледайте да е малко по-висок клас ,защото ако е по-евтините арабика те са “мазни” и стоят самите сърна лъскави,а това пречи в един момент на мелачката.
Иначе за почистването-на 3-4 месеца я почиствам ,има таблетки на Phillips .
Ако изпускам нещо пишете.
Хубава машина,излиза евтино когато си home office и пиеш много кафе 😁
Хубав ден
@@gucmanka благодаря за отговора. Имало ли е някакви проблеми със сензорните бутони например за включване изключване да не реагират, или с каничката за мляко да поддава уплътненето и да трябва да се сменя защото тече например? Изобщо някакви гаранционни услуги налагало ли се е да ползвате за нея?
@@amkprofile не,до сега не е имало проблеми от такъв характер.
The review is good and everything. But above all how nice you are. 🙂
☺️ Oh, thank you so much dear Nick!
Thank you
Well done
Thanks a lot 😃
That's a pretty interesting little milk dispenser! First time I've ever seen anything quite like that on a machine! Bit of s shame it doesn't have a way to keep the milk cold while it's there, but still pretty cool all the same
After you’re finished you simply unhook it and put it back in the fridge so the milk stays cold.
Yes. And it works in "daily life". One can just clean the "thing" once a day .. and adding milk is much simpler, that on a Delonghi (where the top has to be removed, with the rubber-pipe leaking milk - etc" ... plus all the cleaning...
Only thing is, that it makes more noise - the thing happens "nearly all the way out in the open (no "sound-damping"). And, the pressure-pump sounds crazy!!
Thanks, good review indeed
How wonderful Cat for another detailed review! You just answered all my comments in your previous video! It is too bad that the temperature settings are just low, medium and high with no specific figures. I hope to see you when you change filters and do a round of descaling. How does your coffee taste now? Like what you buy outside or better?
The coffee tastes much better than with the old machine. The water was already so hot on the middle settings that it was to hot for me and my husband. So we are using the low setting in the meantime. I guess the three settings will suite everyone.
@@choschiba check in with us again when you change beans, use the pre-ground coffee or major greasing and cleaning. Keep up the good work!
@@likha2010 I will
In China, the model name is EP5147/92，or 5143，5144 for different finish.
Thank you so much for sharing. I didn’t even know that they sell them in China.
Hi,
After two years of publishing this video, what is your impression about this machine? and I'm torn between it and Delonghi Magnifica Evo, what is better?
Thanks,
I don‘t have any experiences with the Delonghi Magnifica Evo, as I have never used it. A month ago I have mine at the service to get the O-Rings exchanged. But other than that it is working absolutely flawlessly.
....Thanks !...
You‘re welcome
Can you add to your next clip some details regarding the grinding levels of the machine
There are 12 steps. So you can fine tune it well
Thank you for your detailed review. Is the sound coming from the machine too much? Will it wake up everyone at home? :)
The microphone of the camera was set up to sensitive. The machine isn’t louder than other machines I guess. Maybe you have the possibility to check out the machine at a local store before buying it.
Hi, for the travel mug section, can you choose a coffee type afterwards, or it automatically brews "regular" coffee for travel mug size?
You adjust the coffee in that function. So you don't choose the coffee type and then press the travel mug function.
Nice and complete review. Is the milk and the milk foam hot/warm/cold ?
It’s hot. Not that you burn your lips though. There are three temperature levels to choose from in the main settings. But I guess that it refers to the coffee temperature. Inbreeding basic settings it is set to middle. For my husband and I that felt to hot. We are running it now on the low level. And it’s still hot enough. No matter if we use a thermo glass or regular coffee mug.
Hi! Thanks for the review! I just got this machine. I wanted to know if you got watery pucks as well after making the espresso? Any remedy? Thanks
I have my setting on 5 1/5 (grind settings). The coffee pads are compact. But in the beginning I had the same issue. They were wet and non compact first. I guess it takes some coffees until everything works properly
yea i also had some new filters which were missing the that o-ring
very bad quality control at Philips i guess
Yes, that’s really a pity. Everything else is really great. So at least you can solve the problem using my rubber band trick.
Great review. I wonder does the machine remember the last setting for every drink or do you have to change it every time unless you store it in your profile?
once you have adapted it in your profile it is automatically stored. So lets say you are using the blue profile and one day you want to have a stronger recipe you use the blue one with less milk and on the other day you could use the green one where you have programmed the same recipe but with more milk.
@@choschiba Thanks that's big help!
Thank you for your video, is it normal for the machine to go through a short rinse cycle every morning after I press the on button and I’m ready to make coffee?
Yes, that is supposed to be like that. Every coffee machine I have had so far in the past does that.
Hello Cat, very nice and interesting review. Its still good the Philips ?
Are you satisfied ?
And one more question for you , from which shop you bought the machine in Austria ?
Thank you.
I‘m still very satisfied. I’ve bought it the old fashion way at the MediaMarkt shop where I included an extension of the warranty.
How hot is the coffee? I've orderd the 2200 series but the coffee was just warm and not hot at all. So i sended it back but How's the heath of the coffee with the 5400 series?
On th e 5400 the medium setting was already to hot for my husband and myself. We set it to the low position now. And it's will hot enough
I'm using medium. I think it's perfect for me not to hot so you can drink it right away, and not to cold. There are three levels - low, medium, high. I think medium is about 70•C
Hi I have a question, does the milk come out hot or warm when you make any of the drinks with milk.
I will make a hot chocolate to tell you. Normally I always drink cappuccino or coffee with froth. We had to put our machine to the lowest temperature setting because the higher one was to hot for us. I don’t have a thermometer 🌡 to test the exact temperature.
may i have to replace aquaclean filter ? while it has %80 remaining , but im using it more than 3 months !
I have no clue. You will have to contact Philips directly. I’m just an enduser like you are.
Hi Cat! Thanks for this amazing video. I have one question - I would like to make latte art and pour from LatteGo to milk jug and then pouring into the cup. Is milk froth good enough for latte art from this machine? I don't know should I buy this one or same one with normal steam wand.
I have never heard about that. So I don’t know 🤷🏼♀️
Get a semiautomatic for the latte art. No way around it!
Hi I have a question...
I have the 3200 machine.. Great machine, but it annoys me quite a bit when it runs out of water... The machine starts to make the drink anyway, but then pauses in the middle of the drink of the water is missing.. Sometimes it restarts after water refill, sometimes it doesnt.. and when it doesnt, then I have to abandon and make the drink from the beginning... So thats a waste of money.. So My question is.. This 5400 model, Does it give a warning before it starts making the drink, if the water level is low ? or does it just stop in the middle when brewing, as the old one does ?
It also stops in the middle of the preparation and tells you to add water. But then it resumes to finish it. Only if you have stepped away and didn’t recognize it in a certain amount of time the machine won’t resume after adding water anymore. I guess that’s okay because then the coffee wouldn’t taste good anymore.
How can I do when I want to do ice cappuccino? Just add ice at the end? I bought this to use in my store. I’m deciding what disposable cup size should I get. What do you think about 12 oz?
I think 8.5oz would be better. In order to create a chilled coffee with a milk foam topping I guess would be best to create a bunch of espresso which you cool down in the fridge. Then you put one espresso serving in one of those cups and run the milk foam program on top of it. You will have to test the amount of milk foam until you are happy with the size of the end product and the taste. Normally you add some ice cubes. The longer you wait after producing the milk foam, the more the foam will collapse. I have personally never tried something like that. But now you made me curious.
Hi, I have this machine from November and my issue is when pressing the on/off button, it won't turn on. I have to unplug it, then plug it again, press the button and only then it will turn on. Have you had this issue too? Thank you 😀
No, only if my hands 🙌🏼 are very dry. Then I sometimes have a problem with touch sensors in general. Not only with the coffee machine. Please test if it works better after you have applied hand cream
Hello, When I turn off the machine, the rinse phase begins and I hear a loud noise for a fraction of a second, is that normal? thanks for the nice review
Yes, that’s normal. The water is rinsing the sieve with high pressure. Otherwise the sieve would get blocked.
Will the machine make steamed milk by itself without having to order a cappuccino and stopping it after the milk is poured? I prefer to add hot steamed frothy milk to my coffee, but can't figure out how to just make milk!
Yes, you just have to use the last button on the very right for further drinks. There you can create milk froth by itself. You can adjust the amount.
coffeeprinters \o/
That would be indeed a cool idea.
if you choose espresso 2 cups at the same time with “extra shot”, does that mean 3 shots total or 4 shots total?
I have tried to choose what you have asked me to test and it says that you can only produce an espresso with an extra shot at a time. So two unattended in a row aren’t possible
Thanks for the review 😊 People are talking about the possibilty to just put the lattego tray into the fridge after using it. But is this recommended after the milk was heatened up and got foamy?
Ps: Its very easy for me to understand you when you‘re talking english :) Are you from Germany maybe? :D it sounds like you are and this could be the reason its easy for me to understand you :D
Ok, jetzt habe ich den Vanillezucker gesehen und bestätigt bekommen, dass du wohl Deutsche bist 😁
Also die Milch wird erst im Ansaugkanal erhitzt. Nicht im Behälter in dem sich die Milch befindet. Wenn man den Kaffee gemacht hat gibt es dieses Kurzreinigungsprogramm bei dem der Kanal mit heißem Wasser durchgespült und somit gereinigt wird. Die Mich im Kännchen wird dabei nie erhitzt. Ich bewahre es dann im Kühlschrank auf. Aber nicht länger als 3 Tage. Dann reinige ich es komplett. Dabei zerlege ich es und reinige ich es mit Spüli.
@@choschiba wow, das ist ja wirklich super praktisch. Vielen Dank 😊
@@Arabella-nd9kn Ja, das ist es wirklich.
Very nice review, thank you for your effort. I'm planning to buy this machine but I would like to know whether what you get in the glass is exactly the same as the amount of coffee shown on the screen. I saw some comments about having less amount of coffee than what is shown on the screen. Have you ever experienced anything like this?
I have the feeling that the ml of water is right. But the milk froth isn’t. I guess there they rather measure in volume. Please take a measuring cup and test. Then you get a feeling how much it is. I found out that I generate different volume depending which brand of milk 🥛 I use and how much % fat it contains. The more % the better the quality of froth. I use one with 3.5%
@@choschiba thank you for your reply. I haven't bought the machine yet but when I have it, I'll measure it. It seems that milk with high percentage of fat is better to make coffee with milk. Do you frankly suggest this machine when the general performance, temperature of coffee and milk are considered, or would it also be good to consider other coffee machines from different brands?
@@hayatnrenkleri9857 I‘d love to recommend further coffee machines. But as I haven’t tried any other one than my old one it’s not possible. If there is a company willing to send me a machine to review I would love to do that.
@@choschiba I finally bought the same machine. It is smaller in size than I expected. It looks cute but it is little bit loud. But it is still okay. It is easy to use and to clean. The milk system is fine, too. I selected extra shot for all the drinks I have drunk so far. I think I will keep it like this because preparing drinks with less amount of coffee in this machine does not seem to satisfy me with the taste in my cup. I like strong coffee. Thank you for your videos and information you gave. They helped me a lot. I couldn't find any review videos in English, except yours. I will also shoot a video for this coffee machine in my native language because there is no youtube video for this product at the moment. I may also be helpful to others.
Maybe you have to buy a coffee that is roasted darker. Then it will also taste stronger.Regarding the setting of the grinding. I‘ve set up ours now to 9 on the scale. What is your native language?
Thanks for the review.
How much coffee is used for 1 cup? Or how many cups you can get out of 1kg of coffee beans? Did you ever measure that?
You can choose the amount of water that you want to use. I have never checked how much cups of coffee I can get out of 1kg. But it’s really a lot!
Ave 10g per full bean max setting 1000g divided by 10g = 100 cups of aprox 10g shots.That is double amount of freshly ground coffee than any stale pod at 1/3 of the cost. B2Cup Bean Coffee is the cheapest and freshest coffee ever...machine pays for itself after a year....
Thank you so much for doing the math for me. Yes, much cheaper than those crappy capsules
Very nice machine. I'd like to know if the power supply inside it would work at 110V in North America(Canada). If it would work then I'd rather purchase this then Philips 3200 we have here in Canada. This one looks much better and has more features as well.
No, unfortunately this machine that I am using is only available for 230V if you can’t find it for 110V yet.
@@choschiba Does it say on the box or in the owner's manual that it's a 220V only appliance? The reason I'm asking is because a lot of appliances these days are made with power supply in them able to work at 220V as well as 110V as long as you use and adapter for the wall outlet.
@@DjWr00m media.flixcar.com/f360cdn/Philips-66160780-ep5447_90_pss_.pdf please read here. It clearly says 230V.
Hi Cat3D, do you know if the milk can be heated but not frothed on this machine? Just curious. Thank you. Great review!
I will give it a try and inform you.
@@choschiba thank you!
I will try to create a hot chocolate this afternoon and then let you know how it came out
@@choschiba thank you! We are thinking of getting this machine but don’t always want too much froth with our milk, just for it to be hot, so your test will be so helpful.
So I tried to make some hot milk. The mug was half full of milk. The other half was froth.
Does anyone know if the Philips will froth unsweetened almond milk or any combo of unsweetened almond milk and heavy whipping cream. I love frothed coffee drinks and really want a Philips LatteGo, but I'm on a strict Keto diet for health reasons.
I haven‘t tried unsweetened almond milk yet. My brother in Germany is using Oatly barista edition. He has experimented a lot and says that this comes closest to normal milk and it produces really nice froth. He has also tried almond milk and personally doesn’t like it that much. Mostly it is sweetened to much. www.oatly.com/int/products/oat-drink-barista-edition
Hello i would like to know what do you think about the hot milk . It is very hot or just a little ? Because i afraid by the temperature i want a very hot milk for choloate for exemple. Thank you
The milk gets hot enough. But the machine creates lots of foam. So if you optically create a cup of hot milk half of it will be foam and half of it would be liquid milk.
Ok thank you so for one Chocolate it is perfect thank you
Does anyone know if this machine also works with skimmed milk? Or is the milkfoam not good enough?
The more fat a milk contains the more it is able to produce foam.
Thats loud, it would wake up my kids in the morning..
If you have the chance to test a coffee full automat at a local store, I guess it would be better for you in order to check out which one is the most silent one.
Nope. US still doesn't have it. Smh. I'm waiting for the 4300 or 5400. I'm holding off for now
What a pity 😏 Hope the 5400 series will be available soon. Should be the same as mine then. International versions might have different numbers 54xx
Update? How is your machine running?
I’ve recently cleaned it and everything is running perfectly. I’m really happy 😃
What's the difference between the 4300 and this one?
No extra shot function, Flat White, Caffee Latte, Espresso Lungo. The body part is made out of plastic whereas the 5400 is a combination out of plastic and stainless steel. The 4300 only has 2 personal profiles. The 5400 has 4. Simple looking display layout. The 5400 has a nicer looking touchscreen layout.
I know the drink settings change depending on the drink. For the Cafe latte, what do the second and third settings relate to and is there a way to have it with more milk than the highest setting?
You will have to go into the extended settings and manually add more milk. Or you create a single or double espresso and add milk manually in the extended manual
@@choschiba I went into the settings and couldn't find anything about Milk volume or adding more milk. 😕
I mean the extra drinks section. It’s the last button on the drink selection. In there you can choose hot milk
@@choschiba OH the Froth Milk selection! Lol I didn't even think about that. Thanks !
@@Atljeepboy Exactly 😉
you are authentic and genuine , i am so in love with you channel ⭐⭐⭐! I can see that you love doing video , can't wait for the next one!! you are welcome in my channel ❤️
Thank you so much 🤗 Whoot, there you go. Subbed 😊
I want one of these so bad! But they pricey and also I wonder if they taste as good as proper hand made lattes etc
It's cool that you can put the milk thingi in the fridge so you don't have to clean it everytime
Also these machines don't self clean the ports filters etc so it grossed me out a bit
I also wonder about the long term durability.
So far everything is really fine. We drink between 2-5 coffees a day. And of course you have to stick to a maintenance routine in order to keep it clean.
@@choschiba how often do you need to do the cleaning? what's the routine like?
@@ameliabuns4058 you can watch my video about the maintenance
@@choschiba oooh nice thanks :D
hi, how would you go about making a cortado on this machine?
I have never made one. But I can give it a try for you tomorrow morning. I will let you know how it came out.
@@choschiba thank you very much. I'm interested in buying this amazing machine but cortado is a favourite drink and I need to see if it can be made in the machine.
@@donaldmalander4741 how much ml is the amount of Espresso that you need for it!? And how much milk is added? I’m asking because you can adjust the amount on the display and then store it as an individual one. Okay, I‘ve searched the internet. I will give it a try.
ko-fi.com/cat3d/posts Please look 👀 for the post that shows the coffee cups. Yes, it’s possible. I have used the Cappuccino button. There you can choose „double shot“ and then adjust the amount of milk and how strong you want the coffee to be by adjusting the ml.
thank you for looking into this for me. I'm very keen to buy this coffee machine now.
too bad this model is not available in the US yet
Yes, other people have already written that it’s not available yet. Hope they will sell it soon.
I just bought the 3241 used for $580, it was hard to find but I love it!
Anyone seen them here in the US for sale yet?
Williams - Sonoma sells the 4500
doesn't have hot milk?
The milk function creates 50% foam and 50% hot milk
I want to purchase this machine, but I want to know if you had any problems with it???
Not until now.
@@choschiba Thank you!🙏
My EP5443/90 seems to be jammed/stuck but not in the way anyone would
imagine - when I use normal coffee (second option) it gives few seconds
of normal flow and then starts drop-by-drop like its jammed, takes 3-4
mins to fill my cup up, so by that time its not that hot, but it flows
fairly normally when trying espresso (first option). Fairly, not great. I
tried replacing filter, washed brew group (or what that thing's called
from the side), still same problem, tried without filter, same thing.
what else? machine is just few days old and was doing this from the
start
Please send it back for replacement . As you are covered by warranty you will receive a new one. The electronics seem to be faulty.
@@choschiba all good from now. turns out they test every machine with coffee to see if it works properly and clean it afterwards before selling, and there was a warning that some coffee residue might be left unseen, uncleaned unintentionally by mistake. mine was clogged up from it and any liquid couldnt get through properly. i just wasnt cleaning all the places i was supposed to. now its all perfect
Great to hear. Really hope that everything works good now in the future just like on mine.
@@timergent We ordered a new one, but we see residue coffee inside. So we wonder if this is a used product and they resold to us. I mean it seems they have sold a returned product! which gave us a very nasty impression. But on the other hand as you said can it be the result of a test? I wonder where did you read about it? Residue powder is inside the bypas.
@@sdmnan it was written in the manual i think, that the product is first tested and cleaned before being sold, but sometimes they might miss something, so that was just a heads up of whats possible. it was noted that some old coffee residue doesn't mean that its used and resold, philips specifically said that company just test them before selling. and i mean, thats a good thing, you get 100% working product, and if some manual cleaning might come up, thats a fair price considering they just doesnt blindly give their products out without making sure it works
Słyszę, że u pani też stuka przy dozowaniu mleka proszę napisać czy to normalne u mnie też tak robi. Pozdrawiam z Polski🇵🇱♥️🌺😘🙋
Grzechoczący dźwięk jest całkowicie normalny. Urządzenie musi wytworzyć ciśnienie, które jest potrzebne do wytworzenia mlecznej pianki. Ten dźwięk jest całkowicie normalny.😽🌼
I saw several tests of this machine on yt but obviously it takes a woman to make a proper one :)
Oh, thank you so much 😊. That makes me very proud. I really hope that one day all of my efforts will pay off and that it will create a bit of revenue. Right now I'm not earning anything. Creating these videos takes a lot of work.
by youur english accent, it look to me you are either German or living for long time in Germany
Sie haben recht. Ich bin Deutsche. Ich habe beschlossen meinen Kanal auf Englisch zu machen um ein breiteres Publikum zu erreichen.
Great machine and inexpensive compared to jura machines
I'm planning to buy Jura E8, do you know about it, is that worth buy it, I can get for 35% off.
@@dumdumreviews7436 i have Jura Z8 for 4 years now and its very good machine, good quality. It needs to be cleaned often but its very easy. Newer machines have cleaning tables and it cleans machine from inside itself so yes i think they worth it. You can do more research.
LOL Big Mug..
... viel Spaß mit den Heißgetränken. Dann kann man noch bessere Videos machen. ☕️☕️☕️
Keine Sorge, ich werde demnächst wieder Videos zum Thema 3D Druck veröffentlichen.