LEARN how to CNC Machine Titanium on a Tormach 440
Vložit
- čas přidán 7. 09. 2024
- Cut back on wasting money, scraping parts and breaking end mills with our no brainer video. The information we're sharing has been painfully learned through trial and error! If you are not watching these videos from beginning to end you are only cheating yourself.
PARTS:
ETS (Electronic Tool Height Setter): entirelycrimso...
Probe: hallmarkdesign...
Endmills: www.lakeshorec...
Machine: tormach.com/ma...
Material: store.tmstitan...
OUR SOCIALS:
/ cadlab_official
/ koobaczech
/ surfaces
/ discord
WEBSITE:
cadlabcnc.com
pearlboards.net
#cncmachine #cncmachining #cnc #machining #anodizing #anodized #engineering #keyboard #mechanical
I’m picking up a 440 tomorrow. I would love to see a video on using the probe and tool setter if you have not already done one yet
I've had my 440 since nov '16. Love the learning experience I've had. I paid it off with a production run of nylon parts in the first year of owning it. I am looking to buy something to sustain what I am doing currently as far as machining jobs. I do predominately small brass parts for fixturing I design for an eyewear company. I was considering a 1100MX but, after thinking about it...why not just buy another 440 for 1/4 the cost? I don't need frills and a big fast machine to make the dollars. BUT MAN, if I hadn't really re-thought the plan out, I'd owe 4x more for the same work I'm doing today on my old 440. Love your vid. Thnks Bro...
Pro Design I’m digging the MX as well man!! It’s my pleasure !!!
Thank you for your honest thoughts on the 440, I plan to buy one this month :)
When you order your Tormach tell Jonathon Pierera sent you 😎
@@cadlabCNC Oh crap man, I placed the order this morning before I saw this :/ .. regardless, I look forward to seeing more videos involving the 440. Take care!
DuckyRC congrats!! You won’t be disappointed !!
I'm going to buy another one this month too! I had my 1st one for 4 yrs now and I'm keeping quite busy with it since. Perfect for what I need making brass fixtures. Almost bought a 770mx, but can't justify it as the 440 is just right per dollar. AND rigid enough for titanium etc...no brainer buy for me.
I’m in the market for a garage Cnc. Subbed and thank you.
Iheart3dprinting my pleasure!
Man that machine is crazy, can't wait to get mine, thanks a lot for your videos, i'm doing all i can just to afford a 440 and start making some titanium prybars. It is hard to find a 440 here down in México.
It is my pleasure to make these videos.. I try to be myself and have a blast. Thank you for your Sub. If you want to see more follow me on IG instagram.com/cadlab_official/ I’m always posting short clips and art on there!!
Yes please make both videos one for the probe and one for the tool Height setter
I’ve done the tool height setter let me know if this helps CNC Crash, During Tutorial
czcams.com/video/rt4vklDF_d4/video.html
I'm down for the probe video...I have a tormach 440 love it. But still learning.. would like to see how to set up and all
GRISSOM Knife & Tool I can make that happen. I’ll do a set up for probe set up for the ETS
@@cadlabCNC that would be cool. And maybe mention where you got everything...
GRISSOM Knife & Tool check out there links in the description. I have everything used in this video and where to get them
thank you bro i love you from my heart so mutch because you teach us the good thing .good willing i want to buy like this machine .and I want to make a small company in my country .please give us a lot
My pleasure.!! I will keep the videos coming!!
Keep up the videos.
skid plate will do!!
I picked up a used 440 from 2015 and just started milling stainless on it. Can't believe it can do it! Just wish it had more power for drilling.
The 440 is a little beast. When I drill with the Tormach I do smaller pecks. Just my own 2 cents
@@cadlabCNC Anything over maybe 1/4" hole without also pre drilling with a smaller bit first and it just stalls out.
@@briandodds stalls out???!!! Interesting!! If you don’t mind me asking what’s your width of cut?
@@briandodds mind you I’m not sponsored or anything by Tormach. But I am also interested in problems and learning lol 🤓
@@cadlabCNC I'm talking about drilling holes. I tried for a few hours the other day to figure out drilling a 5/16" hole in 303 stainless and couldn't find anything that worked without stalling the spindle. This is why I said I wished for more power for drilling. :)
Thanks for sharing
My pleasure
It would be greatly helpful if you listed the tool you are cutting with, and your selected speeds and feeds. Thanks for the great content!
I’ll take care of that for you next cutting video! Your absolutely correct. There is a lot going on there.
@@cadlabCNC Specifically ramping feed rates, and ramp spindle speeds. They the same as your milling speeds and feeds?
Norse Forge no they aren’t. If Have time today I’ll write them in the comments for you guys
@@cadlabCNC Too late lmao. From what I was able to gather, it depends on ramp angle. I adjusted according to what I could find out. So far it's going pretty well, but I'd like to hear your take as this is my first Ti job
Nice video man!!!
Stan Stan thank you🙏🏻
Buen trabajo saludos a ty y tu mami y briana los quiero mucho ♥❤💖💕
Need that video on setting up the tool probe please!
Edit: found it, nevermind.
Awesome!! Let me know if it helps you!!
Is this worth saving for? I’m 15 and trying to get into making knives.
I think it’s a great machine to start off with. If I had the choice I would go with a bigger model.
Broooo, video about this ETS and how to set it pleeeeease
I got you I'm planning on doing to 2min video's i think i can make it happen for you
@@cadlabCNC thanks bro, im waiting my 440 :D should be there in couple weeks. Thanks for your channel i really like it, going to explode one day fore sure
@@1337BlueBird All we can do is try !!!
The 440 how does it work on SS
It will defiantly cut it no problem. I would recommend taking a big width of cut. Nice and light with good speed will get you a nice part.
Would you trust the 440 to do cuts on slides for optics? Looking for a small machine that can fit in a basement since I don't have a garage currently but would be able to make a small side income with
I started off doing slides. Drill tapping never had a problem unless I created one. Check out sone of the slide work I did on my IG @Cadlab_official
@@cadlabCNC Awesome thanks! Love the work on IG makes me way more confident in getting a 440 and being able to do the things I want even without a workshop area
What is the cost/time comparison between casting metal vs. milling metal? How many burs do you go through on average per piece? what is the cost of burs? casting uses a plaster-investment as the main manufacturing cost.
Bro, what’s the beat around the 8:00 mark? I need it!! 🎶
Is that a Glock switch ?
Absolutely not. You can get in big trouble for that.
The 440 is my first cnc as well, it's the little train that could! What kind of tools/coatings are you using. Obviously carbide? IPM feedrate?
sean wolfe we go over all of that in our How to machine this part Vid
@@cadlabCNC Awesome! Just found you guys and just subscribed!
sean wolfe much appreciated !!
Your pinching the part in the vise ? The part should be centered in the vise .
Link to the Crimson not showing the tool setter
let me know if your still having problem I can always email the link to you.