Sick build !!! My brother in law and I built a 2006 si for his son 16 Bday. We used Brian Crower Stage 2 Cams, spring, retainer. With a used 2.4 shortblock. Ebay header & 3 in exhaust. Stage 1 clutch and light fly wheel with Hondata Flash pro for tuning. He has it where limiter is 8400 rpm. We were expecting 200-215 whp We did 3 dyno pulls 232, 235, 238 whp all at 7900-8100 rpm. As a joke coming back from getting it dyno tuned. I was driving and raced his 18 rt charger thats Full bolt on with a tune. The 2006 si Walked the shit out of the Charger till about 100 mph then stayed with in a car length at 135 mph. We both joked that we deff dont tell his son the civic faster. We got a rod knocking 2006 si for $1500 , spent about $3500 total in parts. Im a Mustang Guy. Brother in law is Die Hard Dodge/Subaru. Its Crazy for less then $5000 his son will have a car capable of hurting alot of feelings.
I love this build so much, inspired me to get an si for my first car and can’t wait till I understand all the car talk cause for now I don’t know much but the basics like changing oil and anything else it needs. Hoping to learn how I can make this a beast like that monster you got💪🔥
I got my Si about 6 months ago, and it was my first "sporty" car as well. They're fun but not too crazy to take care of and handle. I love mine. You'll learn lots bro!
Best advice I ever got was " its just nuts and bolts, if they come off they have to go back on" don't over think it and take your time and keep up with whatever you take off and you'll be fine buddy , just don't play with the timing once it's off your fucked if you don't get it right the first time
You have no idea how dope this mean Honda would be to take to the canyons here in souther California, but my city is super hot with California highway patrol and sheriffs handing out state refs like crazy and impounding cars so this would be something I’d never be able to obtain
To make the headers fit did you need to bang the firewall at all? Or did you used more spacers to make it clear? I’m loving your setup. I was thinking of going turbo or sc on my k20z3 but a Frank build with bolt on N/A is the way to go.
270+ all motor is fire!!! 🔥 but question, I got a 9th gen si FBO unfortunately it’s a k24z7, and only pushing 215 after dyno. Do you recommend swapping into a k24a2?
i had 150k miles, plm header, 3in full race and the Hybrid racing intake, i made 217whp and 159lb. Everything else stock. Interesting that you made 208whp only
@@wilok2497 i got a k20z3 8th gen with skunk 2 stage 1 drop ins with some 550cc injectors. got it on the dyno and its linear af, wish i could share photos in here.
208whp seems kinda low for that Z3 with the mods you had. What miles did it have? My Z3 got dynoed at 229whp with a alpha manifold, J35 tb, and RDX injectors that being about the only difference.
@@wilok2497 mine is considerably lower mileage than yours yeah I bought mine under 100k and now it's at 134k miles. I'm gonna run it till something craters and do a K24 K20 frank
Was the k24 / k20 weak without the tune? I’m on a stock tune in my 04 tsx with k20z3 head 06 tsx cams 45 vtc gear rbc intake. Hits vtec hard but feels kinda slow
@@Onelovej get a tune. will make a difference and will feel way better than what youre feeling now. basemaps are not meant to be driven around on leisurely, its meant for you to get to your tuner.
No hahaha you’ll probably make around 300 to 310 on e85 and put the 4.5 DC or 3.5 elite cams to help that compression out. But that’s still a fun power. Now if you throw M5 you will make that power but that’s racing gas. I made 355 on nitro 50 mix with ported head and stock bottom end and cams.
Hey what are you using for tuning? Do you have the flash pro, k pro, or a stand alone ECU? I wanna do this similar set up on mine I just don't know what I can use for a k24/20 set up
@@wilok2497oh I couldn't tell picture looks good to me but then again I'm watching the videos thru my phone. Either way I got no complaints about picture quality
Avoid the Ktuned and Grams junk, go with a Honda J35 throttle body if you're staying NA. They're far more reliable. Throttle body gains are usually pretty minimal though so I'd throw it on last.
@@jeryandrade6 the adapter is sold with the throttle bodies. Whatever one you're buying has an adapter. Just email the company your gonna get a throttle body from and they'll help you
This one is tuned with 93 and made 275. im pretty sure with e85 i can make more but where i live the gas station with e85 i so far and i daily use the car. Dc i believe are the best ones right now. But i got the prayoonto since 2014
Sick build !!! My brother in law and I built a 2006 si for his son 16 Bday. We used Brian Crower Stage 2 Cams, spring, retainer. With a used 2.4 shortblock. Ebay header & 3 in exhaust. Stage 1 clutch and light fly wheel with Hondata Flash pro for tuning. He has it where limiter is 8400 rpm. We were expecting 200-215 whp We did 3 dyno pulls 232, 235, 238 whp all at 7900-8100 rpm. As a joke coming back from getting it dyno tuned. I was driving and raced his 18 rt charger thats Full bolt on with a tune. The 2006 si Walked the shit out of the Charger till about 100 mph then stayed with in a car length at 135 mph. We both joked that we deff dont tell his son the civic faster. We got a rod knocking 2006 si for $1500 , spent about $3500 total in parts. Im a Mustang Guy. Brother in law is Die Hard Dodge/Subaru. Its Crazy for less then $5000 his son will have a car capable of hurting alot of feelings.
I love this build so much, inspired me to get an si for my first car and can’t wait till I understand all the car talk cause for now I don’t know much but the basics like changing oil and anything else it needs. Hoping to learn how I can make this a beast like that monster you got💪🔥
I know you can do it💪🏾
I got my Si about 6 months ago, and it was my first "sporty" car as well. They're fun but not too crazy to take care of and handle. I love mine. You'll learn lots bro!
i can assure you, engines are very easy to understand
@@nathantowle8806 just got my 09 last week coming from an 08 g37 and gotta say the si is so much more fun to drive lol
Best advice I ever got was " its just nuts and bolts, if they come off they have to go back on" don't over think it and take your time and keep up with whatever you take off and you'll be fine buddy , just don't play with the timing once it's off your fucked if you don't get it right the first time
Damm i miss my fa5... Super nice bro.
That things pulls!! That makes me regret selling my fg2
Thanks, isn’t the faster but many people get confused about 4 doors sleeper
Wow, she is makin some power
Thanks
😍😍 amazing power. Sounds great to. Looks like my car.. #FA5
Thanks
Can't wait to buy my si next week running a similar setup but fully built
Let me know when you finish it
So how's she goin'?
What have you done to the internally to the moter? Pistons, cams, valve springs and retainers etc
jesus christ how it pulls!!
Thanks
How come u made it fit without a ktuned adapter for that manifold ?
just bought a takeda stage 2 intake, ktuner v2, full magnaflow exhaust for my 8th gen k24z3 accord
coupe
Anything else done asside from the bolt ons and 24/20?
Can you get the same results from a ported K24 head? I have a K24A2 CRX. I need my next upgrades. I was thinking E85 and then 3.2 cams.
Beautiful sedan 🚘
Thanks
Damn bro 😱😱😱 fast guy
Thanks
Where is the shop that did the work located? Ive got an '09 Si sedan that I would love to have upgraded like this.
sick build dude
Thanks brother
Holy shittt your fa5 pulls bro, I got a k20 in my and only needs a tune
Thanks
You have no idea how dope this mean Honda would be to take to the canyons here in souther California, but my city is super hot with California highway patrol and sheriffs handing out state refs like crazy and impounding cars so this would be something I’d never be able to obtain
Some states or countries are a little more difficult but isn’t imposible
@@wilok2497 not impossible but not something that could be driven on the street often without getting caught up
Yeah, this is why i left mine like sleeper
@@richardledesma1675 that's why you need to get out of commiefornia
Hey man how did you relocate your battery?? I need help finding an intake set up ive bought three and cant get any to fit please help
Amazing build, any list parts
Nioceeee
To make the headers fit did you need to bang the firewall at all? Or did you used more spacers to make it clear? I’m loving your setup. I was thinking of going turbo or sc on my k20z3 but a Frank build with bolt on N/A is the way to go.
I use the spacers on the mount and clear perfectly. Thanks, i like the sc for daily drive.
@@wilok2497 it is going to be my DD, would you recommend a SC than a Frank? I have 155k on the motor right now.
Which one you pick is good dd, the only thing is how aggressive you want the car. I will say allmotor with 300hp, sc with 450 or less is good
Hey does this intake mani also fit the stockz3 on the si and is it bolt on ? Ultra race ? Thanks
The climb after the crossover. just goes forever keeps climbing and screaming . If sex was a sound
Thanks
And those hps went to the engine or the wheels?
Hello, how many liters of oil did you use?
waooooo nice.....
Thanks
Os this z3 head? What k24 block. I have fat and want at least 260 na
I plan on doing something like that with my 2015 si k24z 7 with a turbo
I love turbo
I love it you set up
Can you post all the parts that you used on your engine to get 270 hp please
Prayoonto cams 4
12.5 pistons
Scat H rods
Ferrea valves
Supertech spring and retainers
Goodness it's so much easier to make power out of a K-series then the B series. Lol
ya lo lograste los 270?
Si, 275
@@wilok2497 yo quiero lo mismo solo que tengo stock block k24A2
270+ all motor is fire!!! 🔥 but question, I got a 9th gen si FBO unfortunately it’s a k24z7, and only pushing 215 after dyno. Do you recommend swapping into a k24a2?
🤤🔥🚀
Thanks
Beautiful 8th gen I want to make mine like this. Can you list the cosmetic mods? Like the front bumper and stuff
Hfp front lip
ESR 18x 8.5
Seibon hood and trunk
Thanks
Any new laptimes on a race track ? Or 60-130 ?
Thats lot grey smoke coming out the motor
Ready for my R53 K20 swapped all motor Mini
Should be a good project
@@wilok2497 yours is sick AF man
Thanks
What’s the timeslip for quartermile?
❤❤❤
What grade of gas are you using?
i had 150k miles, plm header, 3in full race and the Hybrid racing intake, i made 217whp and 159lb. Everything else stock. Interesting that you made 208whp only
💪👍🤝💯🔥
I want the 9k revs
Stock internals? Just k24/k20?
Nice bro, I’m building mine but I’ll like to know what’s your all motor set up? To may take more ideas. Thank you🙏🏻
K24 bottom with 12.5.1 pistons and z3head with prayoonto cams
@@wilok2497 k20z3 or k24z3 head
cool video bro what headers did u use for the k20/k24 build?
I want to know too
Its not mine but plm does a header that fit k24's very well in the 8th gen engine bay it dont hit
Sounds angry I have a 09 sedan SI an want to go all motor k20 head an k24 block as well nice build
Thanks
car looks and sounds great is this the same motor thats in the 2012 accord coupe 4cyl?
Block of Tsx 08
Thanks
Is it stock piston and rod
What k24 block did you use if you don’t mind me asking as well bolt on list?
Tsx
why the smoke tho?
What k24 did you use
What if I just run a k24a2? Would a get that power with all bolt ons?
I don’t think so brother
that dip at the crossover is huge!! what rpm is vtec set at? looks around 500-1000rpms to low judging from that graph.
Vtec is around 58 or 6k with the k24, but when i had the k20z3 was around 45.
@@wilok2497 thats interesting, your tuner should be able to fix that dip at crossover.
Is already good to go but remenber, depends of what camshaft are you using. Because for oem is good lower vtec but with cams is different.
@@wilok2497 i got a k20z3 8th gen with skunk 2 stage 1 drop ins with some 550cc injectors. got it on the dyno and its linear af, wish i could share photos in here.
Follow me on ig so i can see it
Velez_k24
What the build list?
Did you have any bolt ons when you dynoed the k20z3?
Catback, header and intake
I will be making close to this horsepower number with a stock block tsx cammed.K20/24. You should be making 300WHP with this setup🤔
Cams are holding me down a little bit
stock bottom end?
asking since im gonna be doing the k24/20
88mm bore
Sick wish Ida used 12.5 comp but I left room to boost and don't want to now. Lol I used 11.5
How many pounds you want?
@@wilok2497 not sure yet. The block and transmission should be able to hold a decent amount..stage 4 clutch give the wave track some work lol
Should hold at least 12-15
@@wilok2497 or 20 lol 😂
@@wilok2497 my bad I run 11.1 comp
208whp seems kinda low for that Z3 with the mods you had. What miles did it have? My Z3 got dynoed at 229whp with a alpha manifold, J35 tb, and RDX injectors that being about the only difference.
At that time it got around 181k. The z3 with bolt ons are around 218-230 hp. Obviously you a tb so yours sounds pretty healthy
@@wilok2497 mine is considerably lower mileage than yours yeah I bought mine under 100k and now it's at 134k miles. I'm gonna run it till something craters and do a K24 K20 frank
Awesome💪🏾
1:55 yall came for this
Is this a k24a2?
Was the k24 / k20 weak without the tune? I’m on a stock tune in my 04 tsx with k20z3 head 06 tsx cams 45 vtc gear rbc intake. Hits vtec hard but feels kinda slow
You’ll fill more power 100% but obviously you need the tune. So everything run smooth and reliable.
@@wilok2497 it feels smooth and it’s very reliable it’s just not very fast just his VTEC hard Without really pulling hard
Ok, i got you now
@@Onelovej get a tune. will make a difference and will feel way better than what youre feeling now. basemaps are not meant to be driven around on leisurely, its meant for you to get to your tuner.
Definitely tune will feel like an entire differnt car
Yo what would this setup make on e85 14:1 compression? Is it possible to make like 350+ reliable? Are you on pump gas in this video?
No hahaha you’ll probably make around 300 to 310 on e85 and put the 4.5 DC or 3.5 elite cams to help that compression out. But that’s still a fun power. Now if you throw M5 you will make that power but that’s racing gas. I made 355 on nitro 50 mix with ported head and stock bottom end and cams.
at 275 hp n/a parts are already going to wear out like crazy
Hey what are you using for tuning? Do you have the flash pro, k pro, or a stand alone ECU? I wanna do this similar set up on mine I just don't know what I can use for a k24/20 set up
Flash pro
@@wilok2497 thank you! Great video by the way!
I need to get better on that, right now i do it with my phone but well see on the future
@@wilok2497oh I couldn't tell picture looks good to me but then again I'm watching the videos thru my phone. Either way I got no complaints about picture quality
Thanks but i’ll have to learn better jajaja
Hey buddy, where did you tan your map sensor?
Is on front of the radiator
Total cost of the build? I’d love to hear! Stock internals? Ported oil pump?
I’ll say around 5-7k because i have some parts since a long time ago
Did you use the Ultra Race or Ultra Street Manifold?
Ultra rece
Specs
Was it a built motor or stock motor with juss bolt ons ?
Built but nothing crazy
Where did you get the motor from? Or did you do it your self?
Acura Tsx
Siick
Thanks
What rods and pistons are you using .
Arias pistons with Scat rods
What kind of throttle body are you using I just ordered ultra race mani for my 9th gen
Skunk2 Grams 72”
@@wilok2497 with a ktuned mustang adapter to run grams tb on the manifold?
It’s skunk2 the adapter
If you’re 9th gen bro just do a head swap with rbc manifold. You’ll get more power from that than a over priced intake manifold
Como instalasteis la earaña con los rodillos de fabrica
Se le tuvo q desgastar a la pompa d agua
@@wilok2497 gracias de todos modos compre el kit k tuned para eliminar los pulí gracias mill
Did you port the block and head?
Just Intake on the head
Can u pls tell me what brand tb and do u need a spacer to bolt into the intake?
Most likely ktunned or grams
And yes adapter will be needed should come with tb
Avoid the Ktuned and Grams junk, go with a Honda J35 throttle body if you're staying NA. They're far more reliable. Throttle body gains are usually pretty minimal though so I'd throw it on last.
How u made it fit the manifold without using a ktuned adapter and what tb u using with that Im
@@jeryandrade6 the adapter is sold with the throttle bodies. Whatever one you're buying has an adapter. Just email the company your gonna get a throttle body from and they'll help you
How can i make my 86 dodge Aries wagon faster?
Kswap
Does the k20z3 head bolt right up to a k24z7 engine?
Im not sure
@@wilok2497 what k24 block did you use?
From a tsx
Yep
Wats the set up if u don’t mind me asking ?
K24/20, prayoonto cams
what mounts did you use?
Hasport 70
So you put an 9th gen si engine is your 8th gen ? I’m curious
No, k24 block and everything else 8th gen
@@wilok2497 thank you for answering 🙏🏽
@@wilok2497 k24 from tsx ?
Yes
I am looking to do mine, its a stock k20 all in how much we talking? 5k?
Depends what do you want or how many hp you want
@@wilok2497 about 275 should be fine. If you know of any good builders in Cali...
Sadly, No brother
Just pistons and cams or?
Prayoonto cams 4
12.5 pistons
Scat H rods
Ferrea valves
Supertech spring and retainers
What mods did the k24/k20 have?
12.5 pistons
Stage 4 Prayoonto
Spring and retainers supertech
Scat rods and the rest you just see it
so is this a k24 block or a k24 head?
K24 block and k20z3 head
Nice de que parte de GA son?
Ya me mude de alla, era de cerca de savannah
Is the transmission and everything compatible with the k24 or did you have to do conversions?
I got transmission and head from oem k20z3 and the block is k24
@@wilok2497 that means the k24 motor is compatible with the k20 transmission...respect for your reply.
You have to change the base that is between the block and the passenger mount. But basically everything is compatible.
@@wilok2497 did you have to replace pistons for it to rev that hugh
You don’t have to but i did. Just to make it reliable.
header
Skunk2 alpha
@@wilok2497 did it fit wit no firewall issues ???
I use 4 screw spacers between the rear mount and the oil pan
Using hondata flashpro?
Yes
Oye Wilo is that the ultra street or ultra race manifold?
Ultra race
Thanks bro
Will the ultra street fit on the 8th gen civic si?
@@MINAR3L_GR3Y_2V yes sir
Yes
Which type of cammes do you use?thank you
Prayoonto
@@wilok2497 stage?
4
@@wilok2497 thank you
Damn revving stock motor to 9,000 Couldn't have lasted long.
I’ve good oil pump, springs and retainers
What were the torque numbers on this??
I believe 204
What trans
2006-2011 Civic Si oem
oem cams.??
Prayoonto stage 4
@@wilok2497 Thank you !!
Compression ratio?
12.5.1
@@wilok2497Damn thats pretty high, can you still run pump?
Yeah pump 93 without issue
What bottom end is that
Tsx k24
@@wilok2497 did u do a bottom end refresh or just put ur head on it
Full bottom Refresh
@@wilok2497 so oem parts not built
K24/20
Oh nevermind i can just watch this video
No problem
Stock internals?
No, i got rods and pistons
@@wilok2497 what rods are using for 9k rpm ?
Scat
What's been done to the motor?
K24 with Pistons and rods
Prayoonto cams
Intake and header, full exhaust
@@wilok2497 nice! I have the same setup on my em1 si but I have DC 2.3 cams tuned on 91 that made 277 and on e85 at 295
This one is tuned with 93 and made 275. im pretty sure with e85 i can make more but where i live the gas station with e85 i so far and i daily use the car. Dc i believe are the best ones right now. But i got the prayoonto since 2014
Another thing im using hondata and i can’t use a throttel body more bigger than 72mm
@@wilok2497 ah I see, yeah the DC has a high lift on the 3.2 that's equivalent to the Prayoonto stage 4.