Compact Tool Bag Loadout - 30+ Tools and just 18lbs!!! Veto Pro Pac Tech-MC
Vložit
- čas přidán 9. 07. 2024
- The Veto Pro Pac Tech-MC might be a compact tool bag but it can hold an impressive amount of tools. Check out the load out and let me know in the comments what you would do different.
#vetopropac #toolbag #toolstorage
Spring Promo - vetopropac.com/springpromo2024/
Link to buy:
Veto Pro Pac Tech-MC (Affiliate Link): amzn.to/4a1KyLy
Vessel 3-Piece Quick Catcher (Affilliate Link): Ebay (ebay.us/fWLpSq) Amazon (amzn.to/3IGepNI)
Milwaukee Inkzall (Affiliate Link): amzn.to/490AVvu
Sharpie Extreme (Affilliate Link): amzn.to/43lBwGV
Stabila BM300 5m (16’) (Affilliate Link): amzn.to/3Ptbr2I
Ox Tough Carbon Marking Pencil (Affiliate Link): amzn.to/3TsE3uj
Makita Impact XPS 6” Bit Holder (Affiliate Link): amzn.to/3PrUwh
Kreg 6” #2 Square Driver (Affiliate Link): amzn.to/3x9edUq
Coast G20 Inspection Light (Affiliate Link): amzn.to/48X9h2t
Coast Rechargeable Batter (Affilate Link): amzn.to/43rHOEF
Electrical Tape (Affiliate Link): amzn.to/3TqNtpX
1” Gorilla Tape (Affiliate Link): amzn.to/48XZJE9
Knipex Cobalt Compact Bolt Cutter (Affiliate Link): amzn.to/3IKsObv
Knipex Cobra 7 ¼” (Affiliate Link): amzn.to/3PR3nJB
Knipex Pliers Wrench 7 ¼” (Affiliate Link): amzn.to/3TI1BfZ
Wiha 8” Long Nose Pliers (Affiliate Link): amzn.to/43smQWA
Knipex Forged Wire Strippers (Affiliate Link): amzn.to/3TzjVH4
The StudBuddy Magnetic Stud Finder(Affiliate Link): amzn.to/43raTQF
Icon ¼” Swivel Head Ratchet: www.harborfreight.com/14-in-d...
Tekton ¼” Swivel Head Ratchet (Affiliate Link): amzn.to/3vcoSgP
Bosch Blaze Pro LDM (Affiliate Link): amzn.to/43tLN3z
Klien Non Contact Voltage Tester (Affiliate Link): amzn.to/3TM9XDa
Makita 1/4” Impact Socket Set (Affiliate Link): amzn.to/3x4sXUH
Wera Hex Plus L-Key (Affiliate Link): amzn.to/3IN146g
Wiha Pocket Star Fold up Key Set (Affiliate Link): amzn.to/3Twjjlb
Irwin 6” Combination Square (Affiliate Link): amzn.to/4cmY91D
Wiss Tool Shears (Affiliate Link): amzn.to/4a0mw3L
Vessel Electric Ball Grip Screwdriver (Affiliate Link): amzn.to/3IOeH4X
Klein 3227 Precision 27-1 Multi Bit screwdriver (Affiliate Link): amzn.to/3IJC7si
LTT Racheting Screwdriver (Affiliate Link): amzn.to/3VsSRf0
Wera Kraftform Plus Screwdriver set (Affiliate Link): amzn.to/3vn7HsU
Dewalt Gyroscopic 8V Electic Screwdriver (Affiliate Link): amzn.to/4a3mGHo
Johnson 9” Torpedo Level (Affiliate Link): amzn.to/4a3mGHo
Milwaukee M12 Surge (Affiliate Link): amzn.to/3TK2moP
Cable Zip Ties (Affiliate Link): amzn.to/4csnWWq
Milwaukee Fastback (Affiliate Link): amzn.to/4a2QDrh
Wera Tool Check Plus (Affiliate Link): amzn.to/3Pvg3p2
Stone Paper Notepad (Affiliate Link): amzn.to/3TpYVlO
Wuben E7 (Affiliate Link): amzn.to/3TKD9L3
Olight Oclip (Affiliate Link): amzn.to/3vcqqYb
Mechanix Speedknit Gloves (Affiliate Link): amzn.to/43nHuXP
Instagram: @Tinkerwithtools
TIkTok: @tinkerwithtools
Gear I Use:
Camera: Sony ZV-E10 amzn.to/3Z3IEoA (Affiliate Link)
Lens: Sigma 16mm f/1.4 amzn.to/3jIrEUU (Affiliate Link)
Microphone: Rode Wireless Go II amzn.to/3VBg9eY (Affiliate Link)
Lighting: Neweer LED Softbox Lighting amzn.to/4cs9Jso(Affiliate Link)
Tripod: Magnus VT-400 amzn.to/3IgfOeY (Affiliate Link)
Legal:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network, Amazon Associates, etc. - Jak na to + styl
I would personnally add a roll of painters tape with your other tapes, it always comes in handy.
Painters tape is a good suggestion. I wish they made mini rolls of it.
I have had this bag for a couple of years and it fits a load of tools in. That said, I just did rationalization and was able to delete a few tools that were not used regularly. It fits behind the car seat, light enough to carry with no fatigue, but requires some creative thinking around tool carry. For instance I fashioned a HD hammer to fit.
A hammer has always been the difficult tool to fit in a bag like this. I have been looking for one but nearly hadn’t considered modifying one. I sometimes carry a set of Knipex nippers with a hammer head end on it that does in a pinch.
You can fit a 12 oz Estwing. I took 10oz Husky hammer ($8) and cut an inch off the bottom. Works wonders.
You can try hanging a hammer through one of the D rings (originally for the shoulder straps)?
That's one option... but I am trying to find one that will fit in the bag and I have a couple of contenders that I am trying out. I should have a follow up video in the coming weeks.
I'll tell you a little secret. You can fit a 10in plier wrench or cobra in the bag. when you have the bag open you can fit it on one of the side walls. If I had a way to post a picture I'd show you how it looks like in my bag.
I have fit them in there as well, I just feel like the slightly smaller versions fit just a bit better and more uniformly throughout the bags pockets. If I were needing to run those, I would have probably spent the extra $20 or so and gotten the MCT. Only time will tell if I really regret the smaller bag, but so far, not in the least.
I finally decided to buy a veto bag and went with the tech mct blackout! Can't wait for it to get here!! I was getting tired of everything getting dusty in my toughbuilt tote (which is great for the price) and I've flipped it over a couple of times in my trunk and my tools have gone everywhere lol. Great video as always and I love the loadout! I'm going to steal the small duct tape idea!
I hope you love the bag. Part of me wishes i had gone for the MCT but I have liked the smaller footprint for things. I also used to have the toughbuilt tote as well.
@@TinkerWithTools I really like it so far! It fits everything that I need and the quality is so nice! I might consider getting another veto bag 😅
Careful... that's a slippery slope. Kidding of course... I currently have four bags and I am really trying to talk myself out of going for a Tier 1 bag on this promo... I think I need to wait until next year truthfully. I can only try out so many bags at a time.
I have this pack love it
Good stuff. Thanks for sharing. I’ve got the MCT and absolutely love it.
Thanks. Glad you enjoyed it.
Nice go bag.
I would add a folding handle pull saw, and a folding handle chisel. Some how, some way I'd have to find a way to attach a 16 oz hammer to the outside.
Saw recommendation: Kerye 5.5 inch pocket saw.
Chisel recommendation: FastCap 1/2 inch pocket chisel.
Hammer: There is only Estwing.
I’ll look into these and the hammer is always something that has been tough. I have been looking for a good compact hammer for a while now.
Nice video! What are your thoughts on Icon tools? I was thinking of getting into that line for a few things.
The few that I have I like. I have two ratchets, a 10” pliers wrench, a set of picks and their small flex head ratchet bit set. They are a little cheaper than the competition that they aim at and for the most part the quality is there.
isn’t this the pro pac mc ? cause the pro pac tec mc has backpack straps
No. On the their website it’s listed as the tech MC.
@@TinkerWithTools my bad is just that the names are confusing
I get it. When I read your comment it took me a minute to make sure I hadn't confused which bag I had.