Installing LED Cube Lights on Our Honda Rancher Four Wheeler
Vložit
- čas přidán 23. 10. 2022
- Our Honda Rancher four wheeler stock headlights are just terrible. We bought some LED Cube lights that we tied into the high beams to run simultaneously with the stock ones. What a difference it made! And, these Nilight LEDs are less than $20!
You could replace the stock headlights entirely and just use the LEDs for the high beams, but why not run them both?
LED Lights: amzn.to/3TxUlAX
Wire: amzn.to/3TMjuYg
Electrical Tape: amzn.to/3gCywSb
---
About us: We're biological brothers who lived a large portion of our lives separate without knowing one another existed. Now we've bought land together!
Follow us on Instagram: / ournewland
Very nice installation, thanks for walking us through it all. Well done. take good care
Hey there! Thanks for watching!
that should be a great addition to the quad thanks for sharing and have a great day
It was a needed upgrade. Those OEM lights were super weak. Thanks for watching!
I bet that will brighten things up for sure!! Thanks for sharing!!
Thanks, Nick! Such a cheap and easy upgrade to our beat-up ATV.
Led headlights will also
Definitely brightens it up.
Our beat-up ATV looks rough, but is still a workhorse! This was a MUCH needed upgrade. Thanks for watching!
That's what's up! Good stuff thank you for sharing.
Thanks for watching, Ninja!
Nice mod! I've been wanting to add lights to my Rancher.
Thanks! It was a very cheap and easy upgrade. Take care!
Dang... my mouth is watering just watching you guys mung out. I need a gold mine to buy lamb in Australia. I will go and make my omlette now. 😢😂
Haha! Hey, omelettes are great too!
Thanks you for your sharing my friend
Wow, now everything can be easily seen.
Thanks, Roberta! The original lights were so tired and yellow-looking. These lights will definitely make it safer to drive at night.
hey so to confirm the blue wire in the stock wire loom is the power or positive and the white wire in the stock wire loom is the ground/negative? just want to confirm before cutting up my factory harness. I have seen most other people ground out the led lights on the frame.
Hi, yes I’m 99% sure from memory and that’s what I said in the video so should be correct! You going with the same lights? They’ve been great.
you don't need a wiring harness??? THANKS
I didn’t. I just spliced straight into the factory wires!
Any problems?? High beams still come on with the light bar as well?
No problems at all. Worked much better than expected actually. Yes, all lights come on.
No problems at all. The high beams still come on with the light bar. @@gdbunn