Making an EVEN FASTER Turning Rubik's Cube
Vložit
- čas přidán 20. 03. 2020
- In this second installment of my quest for the furthest-spinning Rubik's Cube, I integrate some suggestions from my last video, getting a new cube to turn nearly twice as far!
Watch the original here: • Making the FASTEST Tur...
Use discount code "z3cubing" for 5% off everything at TheCubicle.com! www.thecubicle.com/?p=HJMGVPebP (Affiliate Link/Code)
Intro Music: "Forces" by Jim Yosef [NCS Release]
• Jim Yosef - Forces (fe...
Outro Music: "Ruby" by Jim Yosef and Alex Skrindo [NCS Release]
• Jim Yosef & Alex Skrin...
Merch: teespring.com/stores/Z3Cubing
#RubiksCube #cubing #Z3Cubing - Zábava
*Meanwhile in an alternate universe...*
Z3Cubing is making the slowest cube possible by pouring glue and maple syrup in it...
And starting with a rubies brand
Just get a solid block and put 3x3 stickers on it
@@wakkle you are big brain
@@akgamer1825 no u
Alex Marat dollar store brand
I promise I'm not trying to make all these videos 9:59, it just kinda keeps happening...
Dont lie YOU JUST WANT TO BUILD UP TRUST SO YOU CAN SCAM US (lol)
I never even realized that lol
Z3Cubing nah...
Are your logos in your merch store 3x3 size?
*very impressive*
I dare you to use that cube in a comp
U12 cube challenge
@@nickd7225 lol
Oh thanks i thought that you and all the other viewers won't like it😉
AlexD- Racer na it’s a good idea
AlexD- Racer ya
Bank worker: You need an extra 3 dimes to make an equal deposit.
Z3Cubing: Okay lemme break out my wallet.
*pulls out a 3x3*
Lol y doesn't this get more likes its so funny
bready Brett twoset fan i just saw you from another video askng someone why theyre comment isnt underated, good to see you hear
tf i mean here*
@@swiftified4662 ayyyy ,ingling wannabes everywhere
Tf l meant lingling*
You should essentially make each side a fidget spinner by using ball bearings
*yuxin huanglong throwbacks*
Not gonna lie that seems like a lit idea that i want to have.
You stole my profile picture
yes i was thinking of that
exactly my thinking
Me: *does U429*
My sleep paralysis demon: *impossible*
SupremeDucksHD I like this comment a lot 👌
CookieCubing123 thank you!
You were nine away from greatness.
roav liller it’s a joke:/
you:U9999909099999999999999989797 1234567890t
2:22 , taking the springs out......
3:25 , taking the magnets out......
4:45 , making the cube heavier by putting magnets (not to magnetize)
6:37 , again putting magnets except white side and also lubing the core with Lubicle Black......
7:54 , lubing the peices with DNM-37 and Max Fleet......
And then does a U-12......
thx
Are u kidding me? U spoiled it
@@muscleface7562 y u looking at comments while watching vid
@@muscleface7562 you looked at the comments before you even finished the video? what is wrong with you
😊
Put the magnets repelling each other so that it will just keep going
*illuminati noises
I don't think that will work because it also repels it in the other direction. I would like to see what it does.
@@wrog7616 stuck at half a turn
MeadowsGang Illuminati
Wrog U1
This is exactly what you don’t bring to a nervous competition 😂
Ye tru
Wowzers. Imagine using that in an actual solve.😂
WCA Comp? Sorry but doesnt comply with regulations.
@Cuber 7535 Just as a solve. I wouldn't be able to get sub-1 minute!😂
I see u everywhere!
Wind Productions just say it doesn’t follow the rules. Using big words make you look stupid
@@shamuboi3261 Me?
Someone should invent a 3x3 with a motor so it can do U 100+
I think i can MAYBE do it
I have a litte motor laying around and a warrior w
here I uploaded this to my other channel but here czcams.com/video/dQw4w9WgXcQ/video.html
B7Cuber that is incredible how did you do that
@@ANBAT Well you see I used a small motor I had lying around, and I completely gutted the cube and put the motor in, and attached it to the top layer, flicked the switch and boom. by the way I used an old Qiyi Warrior. It's still spinning now!
QnA from comments
Q: Can I use this in a comp?
A: Doesnt comply with WCA Regulations.
Regarding to the question above, it wont comply, it can _possibly_ get you kicked.
Wind Productions why not?
Magnets have to be everywhere I think technoblade
Why? I think that the user can set it up like they want. I think that even the cube with the dimes in it is comp legal
Magnets must be in the whole cube not just one part.
@@chilledwavez your allowed to have magnets, and tension the screws, the dimes i think break a regulation. and the fact he removed springs entirely is illegal.
When you accidentaly put the sensitivity to 1000% in a game:
*s e n s i b i l i t y*
I believe its sensitivity but k-
"sensibility" lol
Ron Sexton no
Where Am I but it is
If you hold the up face and flick the bottom two layers, you can get a lot more spinning by measuring Dw instead of U.
Yeah we don't talk about that one...
Me after watching the U7 move: pls have mercy
Z3CUBING: there is no mercy
U12 move
Uno reverse card
*music intensifies*
69 likes so not liking
Star Wars clone wars reference?
*I am speed*
someone have this man put ball bearings on the ends of the core and basically just make a solveable fidget spinner
If you invert the magnets in the corners and edges it might reduce friccion more than if it doesnt have magnets at all
Amazing video! Im watching many of channels like yours and i think your CZcams channel is the best!
Keep making carrier
I believe the reason the Cube was spinning faster when they were magnets was because the amount of energy he's finger had to put in to breaking the magnets was so high when there's no Force pushing against his finger he can't put that much energy into the Cube.
the magnets made the rest of the layers stable and aligned which makes the cube have less friction, also use the gts 3 since it is already super fast and i get like u3s while turning normally without trying to flick the cube really hard. Also you should have you finger in between the top and middle layer, and start pressing really hard, and slowly more your finger up till its in only the first layer, i got a u4 on a stocked lubed gts2 and like a u6 on a stock lubed gts3
Your channel is so great! You spend so much time during these videos and is makes a great result!
This was really entertaining and you spent a lot of time on this thank you 😃
Next video: *Making my cube a fidget spinner*
Hehe
I always wait for the moment in the outro where he just throws cubes at whatever he was doing.
What if you put the magnets in the cube such that the magnets of the pieces of the top layer repel the pieces of the middle layer?
The pieces of the top layer stay together but repel the middle layer.
I wonder if that's possible
It would just make the cube stuck at 45 degrees
@@alexanderwu With that logic, the normal placement of magnets would make the cube unable to turn.
@@hairtoss7975 I mean it wouldn't literally be stuck but it would be hard to keep aligned
Imagine just taking the cube apart at a comp.
I think if you did this again but with a gan 12 pro, it would be insane. The corner to core magnets the "auto turn" it would help accelerate the cube in the last turn
Thank you so much for making these!! Makes my sons day so much better!!
Nobody: ...
Z3 Cubing: Lets make a cube that can do u12!!!
Z3 after puttning in the Max lube: Lets see how this TURNS out.
Get it
Yes but its not funny
hellopablitonoob gaming don’t be mean and yeah get it
If you reverse the magnets the parts (if the magnets is strong enough) will be frictionless. It should help with friction so you can make it even faster ;)
OMG this is so cool i have to try this out!!!
This isn't even Z3's final cube form.
When new vid m3ko?
@@OP-pe4yc Good question
Hi!
@@OP-pe4yc hopefully by tomorrow 🙏
@@marshi7777 ayyyy what's poppin'?
Take out edge magnets and put them back in with opposite polarity. If magnet atraction slows it down, then magnet repulsion should speed it up :D
Alej Random 2000 iq
Ah yes, _piece MagLev_
Last cube in a store: stop hurting my bros
*walks in*
NO DONT TAKE ME PLSSSSS
You can put the magnet with the same pole, that way the force is opposite and creates a levitation effect, further reducing friction
Heyy z3cubing this is just to inform that a channel named @decoding cube has challenged you to make the fastest pyraminx he has made a pyraminx that turns 13 times in 1 push
Boom!! Break the WR now😂😎
I like your idea of the repelling magnets as a spring.
You could go one step further and use ball bearings in the center peaces.
And you could try to kind of polish all the other peaces to reduce the friction among them as well. Or maybe clear coat and then polish them.This way I'm sure you could get more than a U12 ;-)
but abviously you can only use a really small amount of the clear coat and maybe need to send them down a littel bevore because you cannot make the peaces any bigger.
That's awesome!
Next make the most quiet cube possible, and the loudest cube possible!
You should’ve reversed the polarity of the magnets see if that would’ve worked.
What if you could have turned the magnets around so they repel and keep turning
Unless that’s not how physics work
I got inspired by you now i got my own cubing Channel! 😀 Thank you for inspring me
Great video good tips!
Turn over the cube and see how many D turns you get. Because the pieces are weighed down slowing them
Z3: makes tbe fastest cube
Gallon of Lube: hold my lid
Replace the center pieces with ball bearings. That would be insane
Bring this to a comp the judges will love you
"woahh u6, that's epic"
Lol, I'm trying to learn F2L and I see a new vid pop up and I realized eyyyyy that's the same cube I'm using right now. My GAN XS comes in tomorrow and I can't wait. I got the beginner's method down and now I'm moving on to F2L.
The GAN really isn't necessary if you're still learning, I have a $10 magnetic YuXin Kylin V2 and it serves me well, my PB is 15.65
Wow you use Gan xs while you're leaening f2l !
Well I'm using thunderclap v3m ... My average is around 28 secs
Happy cubing :)
Keep up the good work I'm sure you can solve it in seconds since I'm a kid that's 10 and can do 47 seconds at least or under a minute
Thats almost the same for me but i have the GAN356R
My gan X serves me well, and my PB is 9.65
You should do all the stuff you did to the Mr. M but do them on the mgc elite since it’s fast and then put the springs on 1 or 2
Amazing, but you can add same polarity magnets in the side you want to turn to reduce the friction even more
levicube
Next videos : Even faster cube U15
U10000000
Saturniun YT Tech U10000001
Nice
Dude, I just realized I have to cube that you used for this video!
My friend had a cube that when you flicked it it would keep spinning like one of those fidget spinners. It was crazy
Lol
0:43 when u are so rich u litterly stuff your cube with money
literally
Not litterly
@@somebony alright.
Next challenge: Use that in a comp!!
Copied
Unable to comply with WCA regulations.
@@windproductions343 but you are ruining the joke
@@bitlasyy I think he was being sarcastic
Great video mate!
Put JB weld putty in pieces and see if some how u can use Ball Bearing to make it spin.,I'm not a cuber at all just love to watch u guys create awesome puzzle with them.
I saw the thumbnail and was like “no that is well click bait” I feel SOOOOO stupid now 😂 great video btw z3
I litterally watch the other one 10 minutes ago I-
Our avatars look almost the same
Ooh yea
you are amazing dude😃
I don't know why I started dying when he said "that's epic"
I made a faster cube I took Mr. m removed the springs and did the same thing I losed the screw and added Greece,oil also ball bearings which could do u18
Edit it's makes the cube faster not make it do more turns
I will help u to 100k
let’s put Greece in this cube to make it faster!
For those of you seeing the U12 here it is 9:20
Thank me later
You should have the magnets retracting eachother so instead of having the magnets in a N - S configuration you should have the, repealing eachother as a S - S or N - N configuration crests a not friction surface that spins freely
Now try to get it to do as many M slice moves as possible instead of U moves!
i edited my comment so the replies wont make sense
Edit: plz stop giving hate comments plz
Haha... might me possible.
Like a fidget spinner but better
It’s legit gonna fly away into space lol
He uses lube and screws and stuff and springs
Me: just makes motorized cube that turns FOREVER
Man alex is just crazy good
the reason the magnets made it faster is that it is given more momentum each time magnets pull to each other
4:04 It's the momentum of those magnets
Also, you should probably have tried to use some good ol’ Maru, since last time, it worked really well, and the other lubes didn’t make a dent after it.
10:00 again
No it’s 9:59
Man don't tell me the video's 9:59 minutes long 😂
Cmon Z3 you gotta put some efforts in 😂
Try do use bearings in center pieces, put weights in the corners and maybe try to elevate the layers with magnets
try to take the springs of any 3x3 and tape the fastest side and the opposite of it (to make it stable) and it goes damn fast
BRUH U COULD OF MADE MONEY!!!! U WERE ONE SECOND OFF THE 10 MINUTE MARK smh
lol
That was probably intended
Just to annoy people ;-;
i havnt watched the entire video yet but you could make the magnets in the pieces repel eachother
Z3 cubing: so first off I-
My mum baking and using the blender:so you blended food to get a Rubik’s cube?
Your amazing man😄
he has a bonus channel called Z2cubing and this cube is features in a video from that. in the video, he managed to get a D52'!
For anyone reading this comment, the video title is “Oops.”
Whoa *what?* a *U12* ? I gotta rewatch that!
5:05 cube solve hero: are you challenging me
Non-Cubers: NOOOOO!! You can’t modify it!
Z3Cubing: *haha u12 go brrrr*
what you could do is next time first take the springs out of a not magnetic cube then make it so on one side the magnets are repelling each other so while its turning when its about to stop the repelling magnets will make it spin for longer
Someone: makes a good meme
Everyone:
Please post a new unboxing. Your videos are awesome!
Awesome vid love it!!!!
Ur videos are so entertaining
Another mod is to sand the pieces down in a certain way to cause a loss of friction. This would also make the cube lose stability
Love these vids!
That Thing with the Magnets when the peaces come close to them they first accelerate fefore they slow down the same ammount
SATISFYING TURNING
Try to turn the Dw layer, since it is way heavier it will turn much longer, try it on a normal speedcube and you’ll also see the difference
Hey can you make an advanced skewb tutorial or a skewb tips and tricks video?
amazing vid z3cubing i luv ur channel im from philippines
Same
Take out the springs and use a cube with regular magnets it will be like a U15
I have done that on a Yuxin Kylin v2 m
You need reverse magnets in the core instead of springs to reduce friction and then light magnets in the corners for stability
the first guy to came up with MagLev...
i love ur content so much😄
idk how you would implement it but what about using ball bearings?