Can you show me how to turn the lights on the camera down low at night or even off please? I’m first time use of this system and at the learning stage. Thanks
On mine, my preferred DNS is the gateway address of my router and the alternate DNS is 8.8.8.8. Is there any reason I may want to leave it in this configuration or should I change it to what you suggested in this video?
Do u have a video for adjusting the record setting of the cam? Would it allow record on motion detection only? Been using an old laptop and ispy software and I'm thinking of switching to this nvr for some reasons
Hello, I was just about to ask why it said 'Connection failed' when I tried to view my cameras on my iphone, then the camera images suddenly appeared out of the blue after hours waiting. So far so good. Patience seems to be the key here???? Thanks for your video, Kind regards John
I have Question ... even if I have 32 dahua nvr channel and I add camera to channel one and leave it record for 1 day and remove it from this channel and add the same camera to channel 2 ... when I do playback for the channel one will I find the day recorded or deleted?
I see that you have both Google Chrome and Internet Explorer, but you are using IE for accessing the NVR interface, is there a good reason? Would I be able to access the NVR interface from a computer running Linux and Chrome/Firefox ?
On V2.03 I searched for an entire day; I found a 3 minute piece I want to save as an AVI file; I click "cut" at the start; I click "cut" (no other button) at the end of the 3 minutes and it opens the record screen and saves the entire movie from the time I started to 23:59 of that day (??????). What must I click to select only that 3 minute piece?
@@dahuatechnologyireland2825 thanks for the reply. I tried to access via the ethernet port on the recorder via my laptop and it would not open the webpage. Is there another setting that's needs looking at?
great instruction video!
Glad it was helpful!
I'm new suscriber in your channel from Algeria.
Thanks for subbing!
Hi the person that set up my NVR has emigrated and I don’t know my password how do I change my password now?
Best information ❤🥉💚
thank you!
Thanks for this
My pleasure!
for a 16 channel NVR using a 4 sensor camera, will it use 4 channels?
Can you show me how to turn the lights on the camera down low at night or even off please?
I’m first time use of this system and at the learning stage. Thanks
Login to the camera >> setting >> camera >> conditions >> iluminator >> fill light >> white light >> mode/off/manual/auto
Thanks sar
On mine, my preferred DNS is the gateway address of my router and the alternate DNS is 8.8.8.8. Is there any reason I may want to leave it in this configuration or should I change it to what you suggested in this video?
you can still leave it at 8.8.8.8
Do u have a video for adjusting the record setting of the cam? Would it allow record on motion detection only? Been using an old laptop and ispy software and I'm thinking of switching to this nvr for some reasons
Just change the schedule in storage settings.
Also, make sure motion detection is enabled in the alarm settings.
@@dahuatechnologyireland2825 thank you for the information. Does the system take snapshots (photos) upon motion detection or only record videos?
Hello, I was just about to ask why it said 'Connection failed' when I tried to view my cameras on my iphone, then the camera images suddenly appeared out of the blue after hours waiting. So far so good. Patience seems to be the key here???? Thanks for your video, Kind regards John
Thank you for your feedback
Can I add Wifi adaptor to the USB and have wifi camperas for NVR5216-16P-4KS2E ?
You can use WiFi USB to connect with the local network only.
@@dahuatechnologyireland2825 Thanks. That is what I wanted to know. I am buying one then.
I have xvr4.0 and work and I want to add it one my work laptop so I can check the footage remote is it possible to do ? If so what software is it
Hi, please use the smart pss lite available on the dahua website.
I have Question ... even if I have 32 dahua nvr channel and I add camera to channel one and leave it record for 1 day and remove it from this channel and add the same camera to channel 2 ... when I do playback for the channel one will I find the day recorded or deleted?
It will still show the record.
I see that you have both Google Chrome and Internet Explorer, but you are using IE for accessing the NVR interface, is there a good reason? Would I be able to access the NVR interface from a computer running Linux and Chrome/Firefox ?
it's all due to web plugin, the latest NVR & IPC will support Chrome as well
On V2.03 I searched for an entire day; I found a 3 minute piece I want to save as an AVI file; I click "cut" at the start; I click "cut" (no other button) at the end of the 3 minutes and it opens the record screen and saves the entire movie from the time I started to 23:59 of that day (??????). What must I click to select only that 3 minute piece?
My Dahua XVR DH-XVR4B04 doesn't have human detection, tripwire option active. Why?
the XVR you have is only a entry level recorder without AI
Hi Lukas can ip cameras be accessed and setup via the NVR?
You can change basic settings, however for advanced settings need to login via web
@@dahuatechnologyireland2825 thanks for the reply. I tried to access via the ethernet port on the recorder via my laptop and it would not open the webpage. Is there another setting that's needs looking at?
Could you please mention the App name that you used to connect your NVR? TIA
It's a DMSS, available on the play store and app store.
How to display own logo instead of dahua logo in the ui
Please contact your local Dahua distributor regarding this feature.
Why change Dns adress?.need it?.
You can keep the internet provider DNS if you like
proszę o kontakt
czcams.com/users/ForumsbyLukas
my sound is very soft ... how do i increase it?
What sound?