Video není dostupné.
Omlouváme se.
Dremel Carving - How to carve eyes on a woodspirit.
Vložit
- čas přidán 23. 04. 2022
- Using a dremel 4000 with dremel flex shaft I carve eyes using diamond burs on this western red cedar piece of driftwood.
Kutzall
carving burs I use link,
👇
Use code: CFUSION to save 5% on burs and disks
kutzall.com/?af...
If u wanted to buy me a coffee here is a link to my pal pal👇
www.paypal.me/...
STARBOND GLUE 👇🏻
Use code : Cfusion to save 10%
www.starbond.c...
Manpa tools👇🏻
www.manpatools.com
All the carving tools i use are in this amazon shop listed below👇
As an Amazon Associate I earn from qualifying purchases.
www.amazon.com...
etsy.me/2Usrss6
/ carving_fusion
#Dremel4000
#Dremel
#Dremelflexshaft
#woodcarving
#howtocarveeyes
#eyes
#Howtowoodcarveusingadremel
#Diydremel
#diydremelwoodcarving
#carvingwood
Jordy c'est bien réussi et au début en voyant ces gros ronds j'avais à m'imaginer et en moins de rien tu y forme les paupières et cela change tout ! Félicitations !
Merci Jordy tes sculptures sont réussies , tu es certes plus rapide un peu moins de fignolages, tu le dis toi même mais le résultat m'étonne toujours.
Tu partages ton savoir, pas de secrets tu dévoile tout et tu es très modeste alors que tu es un des sculpteurs incontournables sut youtube !
Merci en tout cas cela m'aide pas à pas 👍👍❤👍👍
Thank you for the kind words
I just came across this video and thought I'd take a look. I've been wanting to start carving/sculpting for some time but, I'm afraid to fail.. Just been watching everyone else doing amazing things with carving. Just wanted to let you know - I exactly know what your talking about with the concave bur! Someone needs to manufacture these - it just makes sense!
If you’re afraid to fail, then “fail fast.”
Start producing carvings, one after the other, without being frozen by perfectionism. You will be constantly observing and assessing your mistakes, but keep going. You will continue to learn and apply what you learned as you produce. Do not over-analyze and critique every stroke of the knife without forward momentum.
Just do it. Pick up your wood, pick up your tool(s), grab some reference photos of your intended object, and start carving. Relax, enjoy, carve, then move on to the next carving, then the next. You will see improvement, you will start loosening up with experience.
Do not remain frozen in place with nothing to show for it and nothing learned.
Good luck.
@@toonybrainthanks for the encouragement! I will at least try, I have all the tools I need to get started. I just gotta pull my head out and get carving!
I'm currently working on a big ( for me ) woodspirit and I made a mess of the eyes 😒 after watching this video I might just be able to rescue them , thanks jordy 🤘👍🏻
Hi Jordy...
You're right..the shape of the burrs do present a challenge when making the curves correct on the eyes and lids..so struggle #1...
The fact that the eyes are an orb inside a socket..struggle #2...
To balance the shape of the entire eye..even though normal human beings don't have symmetry..struggle #3...
Yep eyes...an interesting part of anatomy...the struggle is real...you've done many in the past that were excellent and you'll find a way to teach those of us who still struggle...
Thank you Jordy...🌿🌿🌿
Hey Man , I just wanted to thank you for all the help ! The Illustration’s & Visualizations ! Hands On Approach ! The Narrating along while your carving ! You’ve been an Inspiration ! Thank You !!! I’ve Started buying tools & gathering up wood ! Waiting on an order of very coarse bits for my Dremel !
Awsome thank you and you will love em
Eyes are tough to get right great little tutorial bro
Definitely one of those things everyone struggles with.... the Eyes..looks good.
I used my old taxidemy eyes on 2 of mine and thry look pretty good , lol but i used a blackbuck antelope eye with is sorta grey background and the spirit is smoking a cigar that i didnt finish but coated in glue that makes it moisture proof
Great video Jordy, i will do regular sprit eyes but i to have some trouble on eyes!! Thanks again!!
I just kinda started doing wood spirits, people love em and they sell, but...i need to figure out my eyes. Jordy you are hear when i need ya. Thanks bud. Its like you know what im thinking haha crap. Lol❤
Hi jordy another wicked video from carving fusion stay awesome Just carve
Works for me bud. Im not perfect neither is my art and i tell folks that and they love the authentic and character our carvings get from not being critical. Its fun ❤
Jordy as you know human eyes are uneven on everyone ! So your woodspirits eyes are spot on 👍
Well explained Jordy . Eyes are one of the hardest things to carve .
This is great. Last night I was literally standing there turning my accessory holder, mind effing myself because I couldn’t figure out the shape I needed. Haha glad I’m not the only one
Lol :)
You explain so amusing
Suggest trying not to shoot for perfection (i.e., eyes symetrical). If you view the human face, each side is a little different; like your Wind Spirits. The differences from one side to the other are the things that give your carvings character.
If your carvings were perfectly symmetrical, I would hesitate buying one. It's those small differences that make them attractive. Just keep doing what you do so well without trying to make things perfect.
I use to do the same thing when turning wood on a lathe. When I accepted the flaws in the wood, the pieces became more attractive and natural.
Keep up the great carvings! 👍
Ty
I needed this video. Thank you
Ball cap Brotherman , NICE JOB!
Hillbilly moonshiner 😜
Lol haha Thank you
Great demo Jordy, thanks. I usually struggle with the eyes but now I realise that I haven’t been leaving myself enough room. Hopefully I can work on that now.
The struggle is real! Thanks for the tips, we need all the help we can get on eyes. Great job, Jordy.
I think they would look really cool with some sort of hat like a wizard. Thanks for these tutorials they are extremely helpful.
Good as gold 😉
And Honest! 👍🍻
Excellent video.... I'm picking up some more burrs... I'll be watching this again!
Those Kutzall Bits You Use , That’s where I’m going to get my bits from now on !!! 👍
I agree 1000% bro. That bit would be awesome! Hope they listen to you.
Jordy ❤. Your to critical of your work…Your Great…love your work…keep up the Great work…Bob
love the tips an tricks this will help lots!! stay safe keep carving
There's so many intricate details around a persons eye's. It's damn tough to get them to look real. But always a learning experience to try. Hi Jordy.
Excellent tutorial Jordy! Thank you. I’ve been waiting for this and it is very helpful to me.
Cheers Jordy.
That helps.
one of your best.Nice one Jordy.
Saburrtooth makes an eye carving burr. I have one. Just like your drawing Jordy.
💞💕Randomly you have been🔝🔝 shortlisted🙏 to HMU on my private dispatch giveaway account on 📩TeIegram.🔝🎉🎁.
Thank you I was thinking of having you or rob do my eyes I have hard time with them thank you for your time
I think it looks pretty damn good. It does have character.
Thank you
Thank you Jordy I need all the help I can get on eyes 👀✌🏼😎
loved the video helped me now I have to practice thks Jordy
I think they turned out well, the whole spirit looks good!
An arrow burr is what their gonna call it!
Good day Mr. Jordy, hope you have a super day!(Robin)
Thanks Jordy, nice instructions 👍🏽😊
💞💕Randomly you have been🔝🔝 shortlisted🙏 to HMU on my private dispatch giveaway account on 📩TeIegram.🔝🎉🎁.
thankyou this helps ,the fold of skin gives me trouble above the eye ,very good video again thanks
Everyone has almond-shaped eyes. I am not talking about slanted eyes; you can do slanted eyes if you want, but the eyes are almond-shaped; you could make your own stencils in many different sizes and for other applications.
I like it
Hi Jordy ,your eyes are top of wood pile mate keep on blinking 😀👍
Great tutorial video! When it comes to eyes it`s best to just use a V tool chisel in my opinion. You have more control and it gets them done fast.
I think i would agree with you there
My wife likes your videos her first and her second one
Canadian1dude@gmail.com
Looks awesome!!! Good job!!!
Great to watch and helps tremendously thank you.
jordy your eyes are getting better everytime i watch a video
Thank you
I love your videos. I’m just starting and you make it easy to learn.
I couldn’t find the straight blue cutters you are using. If you could just print the name that would be great.
Thanks again for your easy to follow videos.
I believe there are 1/8 wall tile cutters
man i learned a lot ty ty ty great class.
Great video Jordy.
Cracking job 👏🏻👏🏻👏🏻
Good job Jordy
What about a Wood Spirit / Green Man mix? Possibly vines with leaves & flowers for the bottom 1/2 & maybe continue this on the top to balance it out?
Looks great.
Your work is amazing . Great educational video. Could you do a tall Sasquatch video
Thank you
Thanks so much again, what is this struggle I keep hearing about
The struggle is real
I know your struggles Jordy I have the same problem keeping them even and making look like an eye, some people make it look so easy not me brother lol. Good looking wood spirit. How about a wizard hat curved over at the top.
Everyone has one eye that's bigger than the other, one foot that's bigger, etc. no worries
Mushrooms for the base and an awl for the top.
Eating my Cheerios and watching me some Jordy Johnson!
Lol ty
Look like a top hat type of sprit.to me.
Another great video. Jordy, I think you stress too much about getting them exactly the same. Peoples faces are different left and right. You have seen that demo where you see the left and then the right side...looks like different people.
Jordy, What if we took a cone shaped Dremel grinding stone and round it into the shape you are talking about. It could be done with a cylinder stone grinding the concave shape into the grinding cone. I am going to try it in the next day or so. It won't carve well but it would at least get the eye the right shape? Can you picture it?
Yes good idea
would a small router bit work
I don't know but mabey a deremel router bit if they make it???
💞💕Randomly you have been🔝🔝 shortlisted🙏 to HMU on my private dispatch giveaway account on 📩TeIegram.🔝🎉🎁.
Why don't you have a template of the outer shape of the eyes
Because I dont
Concave vs Convex
Where do you get your bur cutters
Kutzall
Sometimes you have to use a chisel.
Who me?
I got my forehead backwards and 1/2 nose and lip chipped off.
Wanted send pic but wont let me
Lol glue it back on and carry on
Don't know how to send a picture of her work
💞💕Randomly you have been🔝🔝 shortlisted🙏 to HMU on my private dispatch giveaway account on 📩TeIegram.🔝🎉🎁.
These are a struggle!
& again
I'm not sure I like detailed eyes on a wood spirit
:(