If I ever have a garage that I can do the stuff you do, it feels great knowing I have your rolodex of videos to go through when its time to upgrade. Way to make it look easy, even when I know its not! Keep it up!👍👍👍
FYI as of August 2023 the front control arm brackets have changed such that an exhaust loop delete kit is required for the driver's side front lower control arm to have clearance to travel. Also, the bracket is a bit difficult to install on the passenger side. On one hand, you don't have to weld the crush sleeve, but you *might* have to drop the fuel tank to bolt the control arm bracket to the transmission crossmember. I didn't have to drop fuel tank, and ended up being able to crowfoot the bolt from the front and tightened with a swivel from the back on the outer crossmember bolt. All that said your video is what helped me to decide on the same lift. I have 2015 2-door Black 6MT and have the same suspension as you (except 3.5", fox shocks, and no Db3 s in back because I run 35s). If I knew how to make a good video I would share the differences. At any rate thank you so much again Jason
I appreciate you really are doing this out of your garage. You probably have a slightly better set up than the average enthusiast, having a welder and plasma cutter, but you do an excellent job making this seem attainable by anyone. Thanks for the content!
I really dig hearing this level of appreciation... means a lot because I put a lot of effort into showing that average skill and ability can overcome most obstacles with some patience and perseverance. Thank you!
Your excitement for your work is captivating! I love watching you! I love how you explain everything and make is understandable for anyone who watches! You show the whole install and I love that! You keep it light and fun! I just love watching your Jeep builds! You are my inspiration to build my Jeep one day! Thank you!
Dude, you make every install look so easy. Since you are taking subscribers recommendations, I usually give every Metalcloak part a good coat of clear to preserve that zinc gold longer prior to installation. Thanks for taking time to do this install.
Yep, I had rubicon express metal on metal, but they had a harsh ride and the joints needed greasing often. After two years with them 3 of the joints failed and so I went with Metalcload duroflex and what a difference, a smooth ride, excellent articulation, steers perfect and no greasing!
This was what I’ve been waiting for!! I have 1 more payment to go. Metalcloak is by far the best bang for your buck. 1st time ever seeing what I needed to see. My mind is made up. 4.5 lock n load all the way!🇺🇸
Howdy! I can't even explain how good this suspension system is. On the road and around town, the Jeep feels like driving a car and I haven't even begun to see how much more capable it is off road.
AHAHA!!!! man I was just looking to put 37s on my JKU and saw your FIRST video where you crammed them on with no lift.... I immediately had to jump to your channel and see whats going on.....4 years later your Jeep has GROWN!!!!! Im also looking at doing long arms with the 37s, but at the same time!!!
That's the smart way of doing it! I've been so happy with the long arm kit so far. Even just putting several hundreds of miles around Los Angeles it has proven to be better than I could've imagined. Off road improvement was the given but how great this thing is for everything else is amazing.
you are amazing. I’ll be doing this years to come. One of my goals, to do my own build, my self, maybe help from my dad, fam, and friends. Thanks for sharing.
Its great to watch and learn from your CZcams and watch you do it yourself is a great help to others. I have always enjoyed working on my own 88YJ and now we bought a 2017 JK Unlimited and have started on it. No lift yet. Want to make sure it still fits in standard garage.
I went to sub after you located that hole THEN drilled it, the right way. Realized I was already subbed. Your attention to detail is impressive. Good work brother!
Finally ! I have been waiting i just knew this was your next step ! I cant believe the only welding needed is those spacers correct ? The welding is what originally scared me away but if that's the only welding I'm pulling the trigger
Love your videos,I just found your channel.great detail in all of your installations. I’ve got a 2017 jeep JK 2 door sport.Im wanting to build this jeep to be a fun weekend rig for the trails.I will be installing upgraded axles and suspension.I’ve always went with Rock Krawler suspension kits.The Metalcloak suspension kits look to be nice quality as well.Love the channel!
Hey Jeepin Jason.. you look like your having too much fun! LOL. You keep taking your rig to the next level. My JK can’t keep up any more.. thanks a lot for taking us on the journey with you.
👍🏻👍🏻👍🏻👍🏻👍🏻, I have be running the 2.5 Metalcloak Game changer lift on a 2012 2dr JKR for the last 8 yrs and love it! Loading it down with overland "gear" I had to put new 4.5 springs in the back where the majority of the load was and 3.5 in the front to level it out . So this was pretty interesting!
I am waaaaayyyyyy below an average weekend mechanic and I love your videos. always very informative and I learn something new. We are gonna get long arms! Say hi to Pinto please!
this vid was awesome as always you do work like I would do it! I don't have a Jeep but I love your channel! I wish there was,a channel like this for Ford F150s like mine!
Definitely not as high tech as 4 link long arms but WAY easier to install and WAY better than the mid length arms. I was legit "over the moon" happy on that test drive part of the video because the thing felt amazing already so I know with some tweaking it's going anywhere I aim it!
Great video Thank you for the content. I reviewed and read the instruction for this kit for my TJ and it requires a little more welding according to the instructions. Thanks again for the detail.
Ok great Just installed my skid plates from metalcloak Just didn't know if it worked with the long arm kit for me in the future Good to know I can have both Thanks
It's going to be fine... I'm not worried at all and don't actually see anything needing to be trimmed but shouldn't be a big deal considering what I just went through to install the lift.
@@AutoEdits awesome, I’m also curious what you decide on a rear housing/axle combination. Sixties would be nice but I just bought new beadlocks, 5X5. I’ll definitely be following along as usual
bolt on long arm kit?! YES PLEASE!!! Thanks for all the great videos. I kinda feel bad because i like that you're still kind of a small channel and it feels more personal and i like reading/seeing you respond to comments but i know you should have 100 times more subs and i should tell everyone about you but then there would be more people here and it wouldnt feel the same way. It's a real moral dilemma. :))
HA! This is a funny dilemma... I'm just happy and thankful to be able to create the content at this point and interactions like this are what it's all about. Thanks for being here!
I just wanted to express a serious safety concern, the pedestal fan in your garage doesn’t have a shroud and you could experience a nasty bruise…obviously I’m joking, I love the channel, unassuming and to the point good stuff, and Pinto. I’m glad I found you.
Excellent str8 forward video AE! SOOOOOOOenvious of your suspension system. Looks absolutely amazing. And is definitely a head turner for how it looks. You have a great holiday season. And Trail Oooooon!
@@AutoEdits yes my friend looking forward to add some cool stuff to my old 07 soon 😉. Great video love the new suspension feel. You also make it with some of the best taste in the CZcams!
Your a mad man ha ha! In your video looked like the rear driver brake line was close to your tire, I'm sure your on it! Just In case you didn't see it I threw it out there...I got to say I learn some thing new in every video thank you so much for that happy holidays man!
Cool job u may want to relocate the rear sway bar back a bit move the bracket back front hole to back hole and drill new one for rear and get a insert for the back bolt much smoother no rubbing !
@@AutoEdits you are as anal as I am about painting stuff before installing over it and making sure holes are drilled perfectly... I get anxiety when I watch people install parts over dried up mud or paint stuff without cleaning it with thinner first and priming it. Are you a virgo too? Love the direction your Jeep has taken and look forward to that other build you mentioned.
Can’t believe I’m posting again. BUT…….I know HAVE my 4.5 Lock n Load on MY JK. It goes without saying……this has been a life changing event for my Jeep. Rides like a tank. Had #musiccity4x4 install this. Highly recommend this!!! It’s my Jeep only better!!🇺🇸
I have the rough country long arm kit 4 inch lift and it's garbage. I cut all the lower control arm pockets already so installing this kit should be easier...🥵....
Well after watching your video about six times, I decided to tackle this one, so I did but I should had watch the video ten times, few things here and there, took me a total of 31 hours to complete and there was plenty of ddakjffgkdfakjksfkj but all set and done. thanks for your videos, always looking forward to see what are you coming up with next.
I'm Stoked that your stoked. Although personally, not a fan of radius arms or drop brackets. Subjected to binding. How is a kit comprised of antiquated tech supposed to be Metalcloak's flagship suspension? There's a reason why all the other Premium suspension manufacturers don't produce radius arms for JKs...Rock Krawler, EVO, Icon, Teraflex. Now look at the ones that do...Rough Country, Rusty's. Just saying.
I don't agree with this at all but totally appreciate your opinion. This offers amazing performance for the relative ease of installation. What bind are you even talking about???? With the lock n load unlocked it offers an amazing amount of flex. Is there better, absolutely... at this easy level of install in my garage... no way!
@@AutoEdits I wouldn't even say better honestly. If perhaps your looking at max an inch more of travel on a 4 link vs this, I'd say ok but as a whole metalcloak with their shocks and coil combo then I'd say Metalcloak is simply better in almost every way. Now fyi this isn't their flagship by any means so if we are to compare 4 link long arm MC with 6pac shocks to 4 link long arm from any other manufacturer with let's say falcon shocks(or fox) I'd still say that no one compares. The only people I think that can gets close is Teraflex but imo it's all about ride. MC offers best flex, best ride, easiest install, and comparable pricing. All in all MC all the way in terms of final destination lifts. And that's not to say you can't get by with other cheaper lifts or anything like that and I am sure you can get close for cheaper but MC has a good thing that is simply *the best*
You can't make comparisons to Ian's rig. He ran a TJ for TTS. Radius arms perform well on the smaller wheelbase but the great thing about the JKU is that you have the wheelbase and geometry to run a true long arm kit without having to deal with the cons of a radius arm & drop brackets.
If I ever have a garage that I can do the stuff you do, it feels great knowing I have your rolodex of videos to go through when its time to upgrade.
Way to make it look easy, even when I know its not! Keep it up!👍👍👍
Thank you a ton! Some of these are tougher than others and it's constant lesson of patience and perseverance.
FYI as of August 2023 the front control arm brackets have changed such that an exhaust loop delete kit is required for the driver's side front lower control arm to have clearance to travel. Also, the bracket is a bit difficult to install on the passenger side. On one hand, you don't have to weld the crush sleeve, but you *might* have to drop the fuel tank to bolt the control arm bracket to the transmission crossmember. I didn't have to drop fuel tank, and ended up being able to crowfoot the bolt from the front and tightened with a swivel from the back on the outer crossmember bolt.
All that said your video is what helped me to decide on the same lift. I have 2015 2-door Black 6MT and have the same suspension as you (except 3.5", fox shocks, and no Db3 s in back because I run 35s). If I knew how to make a good video I would share the differences. At any rate thank you so much again Jason
I appreciate you really are doing this out of your garage. You probably have a slightly better set up than the average enthusiast, having a welder and plasma cutter, but you do an excellent job making this seem attainable by anyone. Thanks for the content!
I really dig hearing this level of appreciation... means a lot because I put a lot of effort into showing that average skill and ability can overcome most obstacles with some patience and perseverance. Thank you!
Amazing!!!! Keep it up man!!! One of the best CZcams Jeep people out there!
Thanks! Will do!
Really the best. Excellent dialog, clear filming and instructions. Thanks for helping your fellow garage wrencher!
Your excitement for your work is captivating! I love watching you! I love how you explain everything and make is understandable for anyone who watches! You show the whole install and I love that! You keep it light and fun! I just love watching your Jeep builds! You are my inspiration to build my Jeep one day! Thank you!
You're the best!
Dude, you make every install look so easy. Since you are taking subscribers recommendations, I usually give every Metalcloak part a good coat of clear to preserve that zinc gold longer prior to installation. Thanks for taking time to do this install.
That is a really good idea! Never would’ve thought of that. Thanks so much!
Clearing that cool zinc would be a great idea 🤘
Absolutely enjoy following your channel. I learn so much and respect your opinion on equipment.
I'm about 2yrs behind you on your build.
Awesome, thank you! This is hard work and gets expensive fast so just make a plan and stay focused!!!
Yea , I’m watching it again. 2 more months and I’ll have enough saved to take her to the shop. Woo goo!!
Congrats... I've been so happy with this setup!
It’s been awesome to watch your jeep transform from the first video🙏🇨🇦That’s what my two door needs 👍love the string technique
You can do it!
Your Jeep is top notch and the build is so clean! cant wait to see more. I love the time and effort you take in each step. we share a level of OCD
Thank you, glad you appreciate that stuff!
Can’t go wrong with Metalcloak and their super quiet duroflex joint. 👍🏻
I agree... major highlight of the system for me!
Yep, I had rubicon express metal on metal, but they had a harsh ride and the joints needed greasing often. After two years with them 3 of the joints failed and so I went with Metalcload duroflex and what a difference, a smooth ride, excellent articulation, steers perfect and no greasing!
Pinto and Reed are pretty cool. It's those little moments. That new front articulation looks really good, at 30:13.
Thanks dude, I really appreciate how lucky I am. The test and tune will be a fun video to check how all this stuff really works under there!
Really miss your desert/mountain trips...makes me feel like you are the only one on this planet at that moment...amazing!
You and me both! I so appreciate hearing this, thank you. I'm planning a little one in the Jeep as soon as I can.
@@AutoEdits thank you jason for your kind reply!
Much love from sweden!!❤️❤️
That’s a beautiful kit! Designed for guys that have some skills, but not necessarily masters at Jeep craft. Thank you for this video
Thanks for watching!
This was what I’ve been waiting for!! I have 1 more payment to go. Metalcloak is by far the best bang for your buck. 1st time ever seeing what I needed to see. My mind is made up. 4.5 lock n load all the way!🇺🇸
Howdy! I can't even explain how good this suspension system is. On the road and around town, the Jeep feels like driving a car and I haven't even begun to see how much more capable it is off road.
I love this channel and I'm not even a Jeep guyl!!! Glad to see a new wave of videos!
Ha! I’m glad your here... nice to hear from ya!
I love my 4.5 lock n load suspension. I was on the fence with the game changer or lock n load, so far everything has been great. Keep up the videos
Thanks for sharing... how long have you been running yours?
Great installation ! Can't wait to get this one on my 2010 JK !
I love it!
It looks good so far. I’ll admit I’m a little jealous my friend. Definitely going to keep your Jeep more balanced and level 😎💪
Thanks! Yeah, I haven't even begun to discover how much better this is... stick around!
YES!!! A new video Jason. Thanks for uploading dude.
You bet! Thank so much!!!!!!!
@@AutoEdits I can't wait to see the new content Jason. 👍👍👍
AHAHA!!!! man I was just looking to put 37s on my JKU and saw your FIRST video where you crammed them on with no lift.... I immediately had to jump to your channel and see whats going on.....4 years later your Jeep has GROWN!!!!! Im also looking at doing long arms with the 37s, but at the same time!!!
That's the smart way of doing it! I've been so happy with the long arm kit so far. Even just putting several hundreds of miles around Los Angeles it has proven to be better than I could've imagined. Off road improvement was the given but how great this thing is for everything else is amazing.
Just the video I was waiting for!
So glad to hear that!
Keep up the amazing work! Fantastic videos!
you are amazing. I’ll be doing this years to come. One of my goals, to do my own build, my self, maybe help from my dad, fam, and friends. Thanks for sharing.
thank you!
Its great to watch and learn from your CZcams and watch you do it yourself is a great help to others. I have always enjoyed working on my own 88YJ and now we bought a 2017 JK Unlimited and have started on it. No lift yet. Want to make sure it still fits in standard garage.
This would totally fit if I had my hardtop or the Bestop Trektop on there. The Supertop I’m running now sticks up an extra 3”
@@AutoEdits thanks for the reply. What is the tire size you are running and back spacing?
czcams.com/video/VIQOF6n1-bg/video.html
Happy to see a install video for this kit I plan to do the lock and load on my JKU I have the mid arms and the DB3 brackets in the rear
Sweet!
Once you do the Hydroassist you’ll wonder how you used to live without it. 😅 by far the best upgrade I’ve ever invested in!
I keep hearing that... I'm going to install the PSC kit on my buddy Joe's Jeep and see how I like it and then may be saying "yep you were right!"
"Jeep'in Jason" You Sir are having way to much fun !!!
HA! Thanks so much!
Yes, have done the short arm lifted TJ thing...
RIGHT!?!!!!!
You create some great content and it gives me hope that i can do some of the work on my own for my future jeep build!
You can do it!
I went to sub after you located that hole THEN drilled it, the right way. Realized I was already subbed. Your attention to detail is impressive. Good work brother!
Awesome, thank you!
Finally ! I have been waiting i just knew this was your next step ! I cant believe the only welding needed is those spacers correct ? The welding is what originally scared me away but if that's the only welding I'm pulling the trigger
How did you know!!!??? LOL I was totally amazed at how accessible this kit is to the average mechanic (like me)!
Video approved (thumbs up) for Pinto sightings.
❤️🐕
Love your videos,I just found your channel.great detail in all of your installations.
I’ve got a 2017 jeep JK 2 door sport.Im wanting to build this jeep to be a fun weekend rig for the trails.I will be installing upgraded axles and suspension.I’ve always went with Rock Krawler suspension kits.The Metalcloak suspension kits look to be nice quality as well.Love the channel!
Thanks and welcome!
You sir have a new subscriber and should be sponsored in this video.
Howdy and thank you!
Hey Jeepin Jason.. you look like your having too much fun! LOL. You keep taking your rig to the next level. My JK can’t keep up any more.. thanks a lot for taking us on the journey with you.
Howdy! It's call good dude! I'm glad your here for the fun!
Nice job Jason again!!! Not too many reviews on the lock and load. Glad to see one. Tj build possibly??
No TJ for me, even though I love the looks of those... I'm sticking with my JK for a bit longer!
Another jeep soon cant wait!
Man I have seen this Jeep from start to now very impressed keep it up 👍
Thanks, will do!
👍🏻👍🏻👍🏻👍🏻👍🏻, I have be running the 2.5 Metalcloak Game changer lift on a 2012 2dr JKR for the last 8 yrs and love it! Loading it down with overland "gear" I had to put new 4.5 springs in the back where the majority of the load was and 3.5 in the front to level it out . So this was pretty interesting!
Right on!
@@AutoEdits I'm a 1 1/2 yrs late on my comment I noticed. LOL.
@@NarleyAdventures There is no "late" here... glad you watched and took a moment to comment!
I am waaaaayyyyyy below an average weekend mechanic and I love your videos. always very informative and I learn something new. We are gonna get long arms! Say hi to Pinto please!
Great to hear! Congrats on the suspension and I'll give Pinto some pats from ya!
@@AutoEdits it'll be the next mod, been contemplating and your video confirmed it!
Another great video! The rig is looking great, Jason.
Thanks!
Great job Jason!
Thanks!
this vid was awesome as always you do work like I would do it! I don't have a Jeep but I love your channel! I wish there was,a channel like this for Ford F150s like mine!
Thank you!
Great video as always. Glad the string method worked for you.
Thanks dude!
awesome way to get long arms without the hack job it usually takes! definitely going to look into this methode. Thanks
I was impressed... just wait until the first real off road adventure!!!
Definitely interested in seeing how these radius arms perform, particularly compared to parallel arms.
Definitely not as high tech as 4 link long arms but WAY easier to install and WAY better than the mid length arms. I was legit "over the moon" happy on that test drive part of the video because the thing felt amazing already so I know with some tweaking it's going anywhere I aim it!
Great video. Jeep looks fantastic. Can’t wait for the test and tune.
You and me both!
sweet video, I no longer have my JKU Rubicon but I enjoy your videos. I appreciate the alignment tip, which I'll use now for my Polaris RZR, thanks!
This right here... THANK YOU!
Another fantastic instructional video. Great work. Love the Jeep. Keep the stuff coming.
Thanks, will do!
Man...! I love these videos. Inspires me to fix up my 1995 jeep. Thanks man. 👍
Right on! This is the stuff I love to hear!
Thanks, definitely looking at metalcloak for the JKUR’s impending lift.
You'll be happy... this thing drives so good now!
Great video Thank you for the content. I reviewed and read the instruction for this kit for my TJ and it requires a little more welding according to the instructions. Thanks again for the detail.
You're welcome!
Whenever you upload, I get super jealous and just want to buy parts to wrench on my Jeep! Love the vids btw
Sorry not sorry! HA... thanks for watching!
Another great video. Just started but already know and dropped the like!
DUUUUUUDE.... Much appreciated!
Dude been waiting for this video and it didn’t disappoint. Great video. Awesome jeep!
Glad you liked it!! Thanks!
Ok great
Just installed my skid plates from metalcloak
Just didn't know if it worked with the long arm kit for me in the future
Good to know I can have both
Thanks
Seriously... those metalcloak skids are such a great system... congrats on getting the best! Like I said before... underrated awesomeness!
Just what a friend told me. I’ve been waiting for someone credible. Guess I should just call Metalcloak
It's going to be fine... I'm not worried at all and don't actually see anything needing to be trimmed but shouldn't be a big deal considering what I just went through to install the lift.
@@AutoEdits awesome, I’m also curious what you decide on a rear housing/axle combination. Sixties would be nice but I just bought new beadlocks, 5X5. I’ll definitely be following along as usual
Great video mr edits ! Thanks for sharing your empirical knowledge !
Glad you enjoyed it!
You’re a G! Clean work man, appreciate this video
Thank you!
bolt on long arm kit?! YES PLEASE!!!
Thanks for all the great videos. I kinda feel bad because i like that you're still kind of a small channel and it feels more personal and i like reading/seeing you respond to comments but i know you should have 100 times more subs and i should tell everyone about you but then there would be more people here and it wouldnt feel the same way. It's a real moral dilemma. :))
HA! This is a funny dilemma... I'm just happy and thankful to be able to create the content at this point and interactions like this are what it's all about.
Thanks for being here!
I just wanted to express a serious safety concern, the pedestal fan in your garage doesn’t have a shroud and you could experience a nasty bruise…obviously I’m joking, I love the channel, unassuming and to the point good stuff, and Pinto. I’m glad I found you.
Thanks!!!
Super 44 in the front, Dana 60 coming in the rear, long arm kit and 4.5” of lift = Jeepin Jason movin’ to 40’s.
It's got me thinking for sure but I promised myself I'd stay here for a bit longer...LOL
is a super 44 wider than the dana 44?
Man... I just love your videos! Thanks!😃💙💙👊🏾
Glad you like them! Thanks so much for being here!
Love how you explain stuff on your videos! You inspire me to do the same for my own channel! As well as my own builds!
Awesome! Thank you!
Wow I didn’t notice how big those jack stands were until you mentioned them.
Yeah, and they were kinda pricey.
Excellent str8 forward video AE! SOOOOOOOenvious of your suspension system. Looks absolutely amazing. And is definitely a head turner for how it looks. You have a great holiday season. And Trail Oooooon!
Thanks! 👍 Happy Holidays to you as well!
Excellent beautiful really nice and very clean job well done Thanks.
Thank you! Cheers!
Great video as usual - you made install look easy - love metal cloak products!! Looking forward to Dana-60 install.
Thanks 👍
SWEET I love this build
Thanks!
GREAT VIDEO!
Thanks!
Always love your videos my friend! Always motivate me to throw more money I don't have in my jeep 😜👍👍👍
Ha! Sorry not sorry! Enjoy the tinkering!
@@AutoEdits yes my friend looking forward to add some cool stuff to my old 07 soon 😉.
Great video love the new suspension feel. You also make it with some of the best taste in the CZcams!
and the foo fighters video on the back! nice work man!
Great spot!!! Yeah, they are pretty much one of my favorites.
Great video as always!!!! The jk looks great and it sounds like metal cloak has it pretty dialed 👍🏻👍🏻
I'm beyond impressed so far... love that feeling when it's better than expected!
That headlamp is amazing, unfortunately I gave them all away 😂 The big larry pro is amazing for projects too!
I really love that thing!
love the vids! keep'em coming!
Thanks! Will do!
Looks great!! You did a great job
Thank you!! 😊
Your a mad man ha ha! In your video looked like the rear driver brake line was close to your tire, I'm sure your on it! Just In case you didn't see it I threw it out there...I got to say I learn some thing new in every video thank you so much for that happy holidays man!
I appreciate the spot! thanks so much and have a safe and happy holiday as well!
Very well done content sir!!!! Good looking Jeep also.
Much appreciated!
Cool job u may want to relocate the rear sway bar back a bit move the bracket back front hole to back hole and drill new one for rear and get a insert for the back bolt much smoother no rubbing !
Never thought about that, thanks!
I like your toolbox buddy trick on the frame, but here inWest Virginia we have to use Fluid Film or we wont have a frame after a few winters 🤣
I've heard of that stuff... haven't tried it yet. I have a healthy appreciation for my west coast lifestyle being easy on chassis parts!
Super clean install! Now come to San Antonio and help with my build :)
Maybe one day!
The string trick is how we aligned hmmwvs in the Army works well
Nice!
I never thought of doing that! I should try and make that work for my own videos!
So envious of the underside of California cars
Yeah, I totally appreciate it.
@1:50 that's the control arms that make that "ping".... (I thought it was my doorbell).
LOL
@@AutoEdits you are as anal as I am about painting stuff before installing over it and making sure holes are drilled perfectly... I get anxiety when I watch people install parts over dried up mud or paint stuff without cleaning it with thinner first and priming it. Are you a virgo too? Love the direction your Jeep has taken and look forward to that other build you mentioned.
I learn so much from your vids, I feel like I owe you money! But I don’t have any! ☹️
One day I’m gonna buy you a beer though! Promise! 😉
HA! Hey, you watched the video and interact in a great way here... That is all I need so thank you!
Awesome video jason.
Thanks 👍
I pressed like so fast after that joke at the beginning 😂😂😂
Thank you so much... believe it or not... someone was already offended by that.
@@AutoEdits people.. Pffft
I would love to see a crawling video with a comparison of it all working compared to the old set up
Count on it!
Nice work bud. I got some new trails in mind for that thing now! And there’s tacos too
Oh heck yeah dude! I keep watching those dates you are posting waiting to pounce! 😂
Can’t believe I’m posting again. BUT…….I know HAVE my 4.5 Lock n Load on MY JK. It goes without saying……this has been a life changing event for my Jeep. Rides like a tank. Had #musiccity4x4 install this. Highly recommend this!!! It’s my Jeep only better!!🇺🇸
Glad you like yours as well!
I have the rough country long arm kit 4 inch lift and it's garbage. I cut all the lower control arm pockets already so installing this kit should be easier...🥵....
Well after watching your video about six times, I decided to tackle this one, so I did but I should had watch the video ten times, few things here and there, took me a total of 31 hours to complete and there was plenty of ddakjffgkdfakjksfkj but all set and done. thanks for your videos, always looking forward to see what are you coming up with next.
Awesome to hear! Thanks for sharing!
I'm Stoked that your stoked. Although personally, not a fan of radius arms or drop brackets. Subjected to binding. How is a kit comprised of antiquated tech supposed to be Metalcloak's flagship suspension? There's a reason why all the other Premium suspension manufacturers don't produce radius arms for JKs...Rock Krawler, EVO, Icon, Teraflex. Now look at the ones that do...Rough Country, Rusty's. Just saying.
I don't agree with this at all but totally appreciate your opinion. This offers amazing performance for the relative ease of installation. What bind are you even talking about???? With the lock n load unlocked it offers an amazing amount of flex. Is there better, absolutely... at this easy level of install in my garage... no way!
@@AutoEdits I wouldn't even say better honestly. If perhaps your looking at max an inch more of travel on a 4 link vs this, I'd say ok but as a whole metalcloak with their shocks and coil combo then I'd say Metalcloak is simply better in almost every way. Now fyi this isn't their flagship by any means so if we are to compare 4 link long arm MC with 6pac shocks to 4 link long arm from any other manufacturer with let's say falcon shocks(or fox) I'd still say that no one compares. The only people I think that can gets close is Teraflex but imo it's all about ride. MC offers best flex, best ride, easiest install, and comparable pricing. All in all MC all the way in terms of final destination lifts. And that's not to say you can't get by with other cheaper lifts or anything like that and I am sure you can get close for cheaper but MC has a good thing that is simply *the best*
Thanks for this!
27:14 that downshift!👌🏻lol
Glad you appreciated that!
I love my flowmaster sound as well.
Great video Jason, I got to get a pair of long arms for my keep now, damn it more $$$$
Ha! They are pretty dang good... I'm doing another set on my friends Jeep now!
Awesome... Been wanting to do this.... She said that too...lol
NICE!
Awesome video
Thanks!
Great mod.
Better than expected so far!
Thats bad ass.
Thanks!
You can't make comparisons to Ian's rig. He ran a TJ for TTS. Radius arms perform well on the smaller wheelbase but the great thing about the JKU is that you have the wheelbase and geometry to run a true long arm kit without having to deal with the cons of a radius arm & drop brackets.
I did.