How To Choose Tires For Your Jeep Wrangler! - 33" vs 35" vs 37" Tires
Vložit
- čas přidán 5. 06. 2024
- Are you considering changing the tire size on your Wrangler? In this video, Ryan will walk you through everything you need to know when choosing a larger sized tire, the pros and cons, and three tires which we highly recommend.
To start things off, we will show you three Wranglers with three sizes of tires: 33-inch, 35-inch, and 37-inch. With differences in tire size come pros and cons which you will need to consider before making your purchase. After talking you through a few comparisons, we will then show you the differences in how these tires perform on and off-road! You'll see how the tire sizes perform differently and learn what tire size might be best for you and your rig!
If you're diggin' the tires and want to learn more, check them out here:
33" NITTO Terra Grappler G2 Tire - terrain.jp/2mhH3ck
35" NITTO Trail Grappler Tire - terrain.jp/2lhcX8b
37" NITTO Trail Grappler Tire - terrain.jp/2lhcX8b
Subscribe for Daily New Jeep Videos: terrain.jp/SubscribeXTyt
0:00 - Intro
1:42 - Stock Tires
3:01 - 33" Tires
4:03 - 35" Tires
5:17 - 37" Tires
6:08 - Road Test
8:31 - Trail Test
11:06 - Outro
----------------------------------------------------------------
Give ExtremeTerrain a follow for the latest Jeep Wrangler news, videos, pictures, and content!
SUBSCRIBE at / extremeterrainvideos
Facebook: / extremeterrain
Twitter: / extremeterrain
Google+: www.google.com/+extremeterrain
Instagram: / extremeterrain
ExtremeTerrain.com is your off-road outfitters! We strive to carry a giant selection of aftermarket Jeep parts for Jeep Wranglers who like to hit the trail, the beach, cruise, crawl or go off-road. We carry a full line of off-road lights, accessories, lift kits, body armor, wheels, tires and more! With FREE Shipping on orders over $75 and the best customer service in the industry, we have you covered when it comes to any JK, TJ or YJ Jeep Wrangler. Make sure to chat with one of our Jeep Experts if you have any questions or want help planning your Jeep Project or Jeep Build!
www.extremeterrain.com - Auta a dopravní prostředky
Looking for new tires? Check out our site! : www.extremeterrain.com
Subscribe for Videos! : terrain.jp/SubscribeXTyt
I look at modified Jeeps so frequently that 35s have started to look stock to me lol
I know, right...crazy, isn't it?
I have a 2018 JK, (came with 4.1 gear ratio), 2" MOPAR lift, NITTO 285x75x17 stock wheels, a little rubbing. Getting KMC Enduro rims this week. Should have gotten the Nitto 35's to begin with :-( This is my Fun Driver, since my
police cruiser is my daily.
@@ifp123 if you are rubbing with 34x11 a 35 isn't going to fit.
My 1st comment was 6 months ago; I now have KMC wheels, Nitto 35's - no rubbing @User Name
@@ifp123 Do those wheels have some insane backspacing and offset or something? I rubbed 35s with 3" of lift.
33s strike a good balance without messing with gearing especially if you use your jeep for everyday use
On the short Wranglers, you can 35 inch without regearing because they are much lighter and are a bit more forgiving with the larger wheels. The four door lose a lot of pep with 35 inch tyres. However, the short wheel base Jeep was a 2001 Wrangler TJ and the long wheel base Jeep was a 2011 Wrangler Sahara JKU. The engines were completely different. The TJ engine is much stronger than the anemic 3.8 Pacífica engine.
Indrid Cold there’s a long wheelbase TJ too I think it’s referred to as an LJ
Put 33 on mine, had to change gear. Loss of tork was awful in the manual trans.
@@indridcold8433 The 3.8 engines don't do a lot offroad without breaking.
The 3.6 is better than the 3.8 but the 4.0 is 10x better than both.
@@spydergs07 Agreed the 3.6 Pentestar engine is superior to the 3.8 Pacifica in every way possible. The AMC 242ci I6 (Powertech 4.0) is the best offroad, low rev, high torque, supernatural durability engine out of the three. The best engine for highway use is the 3.6 litre Pentestar and can be successfully used off road as well. The 3.8 is... The 3.8 is the best for a minivan.
The first Jeep that went over the log had the cut tree limb pointed directly up, the second Jeep had the log with the tree limb placed in a different orientation. Obviously this made no difference in the comparison as the 37" tall tire will provide more clearance but having the log oriented exactly the same would be a better apples to apples comparison.
Otherwise , very informative in explaining the difference in tire size vs suspension lift.
I've got an '02 TJ (not a JK), but I run 35" Mickey Thompson Baja MTZ (LT315/70R17) tires with a 5-1/2" Rubicon Express long arm lift. With 4.88 gearing, I am pleased with the on-road as well as off-road performance.
This is the best information on tires/wheels etc. It gives the measurement in both difference standards and also shows what they look like size by size. I haven't seen good comparisons before. For some reasons tire size is just confusing to me and this cleared up a lot. I plan on looking at more of their videos.
The thing that most people tend to miss is that there are different sizes of 33” or 35” tires. Each manufacturer varies in the actual height, but there is also a lot of variability in widths, which makes a huge difference in whether or not a tire will fit. For example, there are 35s in 10.50, 285, 12.50, 315, 13.50, etc. width specs, and more. The wider you go, the more challenging it will be to fit.
Great video! I run 285/70R17 (33") MTRs on my 2 door jk rubicon with 4.10 gearing. It's the perfect combo for me. I invested in skids and diff covers. Yes, I drag a bit, but can wheel all day with the big boys and then drive the highway for miles and miles without issue.
Awesome video and very informative. I am a brand new Jeep owner and doing research on what is the best fit for my Jeep regarding tires. You helped out a lot with your video. Thank you.
I run 33's on my YJ and never a problem, either clearing obstacles or mechanically. Good choice.
My 37 Nitto Trail Grapplers just arrived yesterday! After watching this, I can't wait to get them mounted/balanced and installed on my JKU with 3.5" lift this week!!!
Did u re-gear?
2016 jeep wrangler AT with 35inch Toyo R/T 2.5 AEV lift plus procal running stock 3.21 gears. it handles surprisingly well . great video.
Excellent tutorial, keep the great videos coming Extreme Terrain.
Love this video. I'm currently on 32" duratracs with 11,000kms on them and no lift, but once its time for an upgrade I'll look into 33s or 35s with a 2.5" lift and regearing. I mainly use my jeep to get to and from solar fields and other construction sites without road access... and well lets just say my ex g/fs kia rio wasn't cutting it. lol Still waiting on the new exhaust though. :(
33s will not be much of an upgrade. Just got mine less than a month ago and already want 37s or heck...dare I say 42?
You just talked me into going with 33's
same!
@@carghai9235 I disagree, I’m rolling 35s on my JL with a 2 inch lift and have no regrets. I didn’t regear and it still accelerates nicely maybe because it’s a 2.0 turbo. I would’ve gotten 37s but I have a Sahara, and it would’ve taken 4 inches of lift and the spare tire mounting gets tricky. Go with 35s!
@@ishdeepsingh2960 I will get 37s but I need to find tougher trials jeep is super capable
My Jeep jk has 3 inch lift and 275/75/18 maxxis RZR 32 inch tire
@@atvman1014 is your jeep too capable?
Excellent work as always. We went with 38" x 14.5" MT/R with Kevlar. - Avengers.
This was the best vid for my questions on tires.
This is super informative and helpful for me being a complete newbie to this type of thing! Thanks for such an awesome video!
We're super happy you found it helpful! Thank you for watching! -Zach
i got no lift on my jeep. rolling on 295/70/r17 nitto grappler mud terrains with 1.5 inch spacers. tires are a smooth ride on the highway once u break them in
Had a 2010 JKU Rubicon. 2.5" lift, Poison Spyder flares all around. Minor pinch weld trim. And PCS Brawler rails.
Regeared to 5.13. Ran 37x12 YRXUS MT on 17' alloy.
Handled Uwharrie very well. But I didn't do the most extreme stuff.
This set up also handles the highway very well and the narrow city streets of Boston when I had to go up for a funeral.
The River Raider Off Road engine to gas tank skud plate added protection and improved highway aerodynamics. Got the same MPG as stock.
I'm running 35 x 12.50 Cooper Discoverers on my 2012 Wrangler Unlimited on 20-inch Mayhem rims with 5-iinch body/suspension lift and couldn't be happier overall.
just as I was about to get 35" tires I found this video. And yes, 33" is more reasonable. thanks!
My favorite combination is 33s with 15 inch teelies on a TJ. I have a JK though, so I'll stick to 33 on 17 mags.
I have a Jeep that I’m considering tire sizes for. Your information was very helpful. Will go with 33’s so I don’t have to mess with RE-gearing. Seems like the best compromise. Thanks again
Glad our video helped you out! 33s are definitely the best of both worlds. Bigger and more aggressive looking than stock, but not big enough to require regearing or other modifications. -Zach
Very informative I really like the side by side comparison great job!
Great Job. Very informative and now I am convinced I need 40's. : )
2rajnel and Dana 60s to go with them.
Thats what I ended up doing! Its an awesome setup. I will recommend the PSC Sterring System to go with that, otherwise your gonna have a helluva time holding it on the fwy
Nah do ur self a favor get 54s
Thanks for the laugh this morning. I need that. Lol
You definitely don’t need 40’s
Man that black rubicon looks mean !
Great video! I'm running 35x12.50 Nitto Trail Grappler M/T's on 18x9 Method Race Wheels on our JK, but 37's keep popping in my head. I just finished up the rear part of my KJ lift today, I will be going from 235/70's on OE 16x7's up to 245/75 on 16x8's. I have the Renegade KJ so I've already got plenty of gearing, and some awesome Fox Shocks (thanks Jake!) No matter what tire size you go with, you will always want something bigger down the road.
currently running 37's on a 5-inch lift. Stock gears and axels. Fox reservoir shocks. Have no problem at all off-road.
Thank you for the great information. As someone who is new to jeeps, I’ve wondered what the pros and cons were to bigger tires. You answered a lot of my questions.
It's a good video Eddie, but realistically it all comes down to $$$, and I just don't mean purchasing the products either. Day to Day cost must be factored in when you start lifting and going bigger on tire size. You're going to spend a LOT more dollar day to day on fuel if you go bigger in any way. So ask yourself that question first, can you afford the day to day expense of the modification that you are choosing to go to, if so then mod it out. If not well, there's your answer. I use my JL as a day to day and have the 33 KO2's on it, this time I am leaving it alone. I go down plenty of trails no problem and when I am wheeling with the gang I learned the hard way it's cheaper to just "Go around the obstacle". I still have fun, I still go wheeling, camping, fishing etc..etc..I now just have more money in my pocket lol and believe it or not I enjoy my Jeep with 33's on it as much or more as I would with 37's on it. PLUS they last a whole lot longer which means I am saving huge amounts of $$$. Bottom Line. It's what you can afford or choose to afford when it comes to this issue. Jeep On Brother!
No one ever talks about the effect larger tires have on stopping distances. I felt a huge difference just going up to 33's
Tom Edgar that's common sense just upgrade you're brakes
Bigger tires = big brake kit
@@Joegoldberg7nothing money won’t fix…
@@Joegoldberg7 what upgrades they have on the brakes. Looking to upgrading my brakes making to much noise.
One of the most informative videos on CZcams for new Jeepers! Thanks
Thanks for watching! -Zach
Very good video. Great content and very informative. Big thumbs up.
I'm perfectly happy with my 33's on 17x9's 🤷♂️. Perfect daily setup imo.
I just swapped from 32 inch street tires to 33 inch off road tires, very little difference in noise, better ride quality, and substantially better handling off road. Definitely enjoy the look and will probably lift it soon, just a bit. Thanks for an informative video.
Thanks for watching and happy to hear you're loving the 33s! -Zach
JKUR manual (4.11 gears) with just a EVO MFG leveling kit. Going with 35's, 1.5" wheel spacers and trimming the fenders+rock rail. IMO it's the best for my needs (low center of gravity, bigger tires and easy on the wallet)
Ryan, I am glad you said something about gearing as most do not take that into consideration or do anything about it but I disagree with one point. Most JKUs out there today have the standard 3.21 gear ratio with the exception of the Rubicon and Willys Wheeler models. The stock 32" tall tire with the 3.21 and an automatic imo is not ideal from the start. Add a slightly larger 33" tire with an even wider foot print causing more drag, and the jeep will feel sluggish and not perform well at highway speeds meaning maintaining steady 75-80mph speeds are not like they should be and your foot will be on the pedal more that it should. My recommendation to anyone purchasing a new jeep, make sure you at least get the optional 3.73 gear ratio. It is a cheap option considering the cost to regear and In the end, you will happier even with the stock tires. If you want to go up to a 33, you will be fine. Get to the 35-37 range and then 4.10-4.56 is necessary. If you have an older 2007-2011 with the 3.8, this will be even worse without the right gear.
Great video. Thanks for the information
Increased risk of rolling, both on road and off road is a big consideration for me when choosing a lift and tire size. The taller you are, the quicker you flip. I liked the video. I'm running the minimum lift to get the minimum effective tire (for me, I felt 33" was the best balance). I'd love to be able to run a bigger tire, but I like to go fast and slide. There's no free lunch.
Everett Durst I feel the same way, do you even need to put a lift on with 33's
However, when you go up, you are supposed to go out so if you are making your truck taller, the proper way to do that is to make your truck wider at the same time. When done properly you are not at a greater risk of rollover, at least not enough to be concerned about.
For me it is a matter of skill/fun. I could throw 37"+ tires on my jeep, but then I am just idling down a rough road for hours on end. With 33' tires I have enough clearance to go almost anywhere, but skill and knowing my jeep becomes a factor too, requiring me to be engaged and think about where my line should be. (That is also why I have a manual transmission, but that's another discussion)
Im running 40's on RokJok 60 Axles (front & rear) with 6" Rubicon Express lift with Coil Over conversion. Had to re-gear to 5.38 but the drive is fantastic!
Good lord that is high, that means if it Snows it's going to get you first, Lolol
JKU Rubicon, Rock Krawler 2.5" Flex lift, with 35x12.5x17 BFG. The Jeep is a 6 speed manual and still have the factory 4.11 gears.
Do you have spacers? If not, do you have any problems with rubbing? I've had 1in spacers for my 35x12.5x17 for a year, but just moved to Germany and my tires stick out past my flares--doesn't pass German law/inspection. I'm trying to find a cheap way to make this work and am trying to find input. Thanks!
I do not use spacers on my wheels. The rims are: Trail Master TM210 Wheel 17x9
I'd really love to see a video on the correct diff gear ratios for each of the tire sizes illusttated.
You need this gearing to maintain current effective ratio = (New tire Dia X existing gear ratio)/old tire dia.
@@constantineeliadis5582 Yeup
running JL Sports S 2018 on 37's in D30 on 4.88 gear ratio, drives like a beauty!!! no issues! even had no issues fitting the 37x12.50R17 on -22mm off set with no lifts on it, no rubbing at all, i think our JL sits on the spacer cuz it seems higher than most jeep (of course the performace was way off 54mph on the techometer while the gps said 65 mph, had to regear it to 4.88 to return it to stock ability.
Great video. I have a 2012 Wrangler, 4 inch lift, just upgraded from 35 Toyo ATs to 37 Cooper MTs, stock 3.73 gears are just a little sluggish, still does 70mph at 4k and the 3.6l has plenty of power to push them. But I will regear to 4.56 for full range both on and off road.
Since when does the 3.6 have plenty of power? It has about the same power as a Toyota corolla.
Growing up, I 'member that Jeeps "...weren't real Jeeps unless they had 31" tires or above..." That began to change with the TJ, which came off the factory with 30" Goodyear Wrangler A/Ts. The coil springs allowed for 31" tires with stock suspensions. The advent of the Rubicon further changed the rules with stock 31" rubber.
I remember getting 31" narrow SuperSwamper Radials on stock rims and suspensions! Horrible noise, scary on wet pavement, but unstoppable off-road.
These modern JKs are looking more grotesque than purposeful, too much of a fashion statement... One can compare the Jeeper scene with the motorcycle scene: from purist and functional, to poseur and f'ed up.
What is the right tire for you? Whatever! It is always the driver that makes the Jeep, not the diameter of rubber or inches of lift.
Jeep on, and remember to wave!!!!
The History of the Jeep tire, by Teo P.
@@Hay-tn6hz
Hahaha, thank you!
I can still remember reading an issue of 4Wheel can Drive Magazine, and it was such a huge deal that a Wrangler came out of the factory with 30" tires!
Crazy I just got into my own Jeep after driving my gfs for three years I’ve always waved and had people wave back ever since I bought mine like a week ago no ones waving lol
@@gh0uli3e i always wave- it's just fun. but there are a lot of a-hole jeep owners who look for reasons to be grumpy- and not waving is one of them. i pass the same jacked up jeep every day on the way home from work, i always wave, he never does- now it's a game- i literally lean out the window waving like an idiot- at the very least I'll get him to laugh! 😅
I have BFG TA KO2 305 65 R18 for my Sahara with 2 inch lift. I think this is possibly the best ever tire for wrangler. They are almost 34 inches and no loss power at all so no need to change gear ratio. These are snow flake winter, all weather tires so no issues if you live up north.
Could you post some photos of your jeep, im thinking about the same configuration with stick wheels 18,
thanks. I was planning on getting bigger tires. the stock was 245 75 17 . and i replace it with 265 Goodyear wrangler i like it and feels comfortable on road .
Great vid. I am running 33 10.50 15. Gives me more digging on highway and street snow and I can air down more than 17 or 18 rims. This is on a YJ with a 2.5l engine. Did have to re gear. One thing you might wish to mention is height gain. 37 only gives you 2" on axle over 33. Not much compared to the other drawbacks. Like steering and suspension wear.
Love these tires ! Sometimes hard to find .
For all of you asking what gearing I need for what size tires. Type Jeep JK gearing chart into your browser and it will give you charts for 3.8l engine with manual or automatic and 3.6l engine manual or automatic. Then you can figure out what gearing goes with what tire size you choose.
Deathadder097 I put a 2.5 lift kit with 35's I need to re gear my jeep
What price should you be looking at for a dealership to swap out the gearing? I know people say don't go with them because it can be more expensive, but it will hold your warranty.
Best combination is a 3.5 inch lift kit and a half inch spacer with 37 x 13.5 r17 tires, it's amazing and you do not have to regear the 4.10 gearing ,only time you have to change the gearing with the 4.10 is if you get 40 inch tires or up, anyting less ,4.10 gearing is perfect and a lot of power ,I have it on my 2019 4-door Jeep Rubicon
I just lifted my 2dr JK with a 3.5 inch Rough Country kit and I have 33 inch tires. I am admittedly not a trail guy and my jeep is my daily driver. But I just wanted that extra oompfh. Lol. The 33's do look a little small now compared to before so I may go to 35's but since it's my daily driver I am more interested in a more decent smooth ride. Probably not the set up or lift some would want or use but for me it is perfect and I love it and everything is working great and my ride is way smoother than before.
You guys have been doing the most lately.
Now that the 2021 Rubicon JL comes with stock 33's I have to go bigger!
I accidently found out that having the tyre fill the wheel well is not necessarily the best thing to do. I have room for 37s with ease. However, I run 35 inch tyres to allow for more wheel stuff into the wheel well. The 37s looked much better. But it is not all about looks. The notably smaller tyres do have some advantages going over super uneven terrain like very rocky terrain. It was all a mistake I found this out. I had 37 inch tyres for five years and it was time to replace the tyres. The shop was out of 37 inch tyres so I opted to get the 35 inch tyres because I was on the spare and had five plugs on another one that was leaking. I was disappointed in the empty wheel well look, but when I went off road there were some advantages. The Jeep did hit a few more rocks with the axles, but not a lot more. But the articulation without rubbing was much better.
I run 37" KM2s on my 2013 JKU with 5:13 gears. My axle tubes are sleeved and the Cs are gusseted. I have already bent my Dana 30 tubes as I'm preparing to move up to one ton axles and 40+ inch tires. If you have a stock drive train and you wheel at all, you'll soon have issues with 37s wreaking havoc on u joints, wheel bearings, ball joints, steering components, etc. But that's why we love our sport, gotta pay to play
Just for the record. I have a 2012 4door jk.4.5 in lift with 37 x 13.50 x 17. 240.000miles. 200k of which have had the kit and tires. To be honest unless you have something to compare it to , you might not notice anything. My gears are 3 something . Been off road in Colorado and Moab and such. Not trying to break anything. Held up pretty good. Ball joints went at 180k. Don't let people talk you out of going big. If it makes you happy go for it. It was worth it . Lots of fun.
Thanks for the info I’ll be sticking with 33s! Until I can afford the gears axels and lift!
Glad we could help! Nothing wrong with 33s at all, better fuel mileage that way😉 -Zach
It is a daily driver and I drive about 60 miles one way so mileage counts some!
for offroading and not aesthetics, i would go for skinny 33's, this will outperform any large-wide 35's-37's
Just bought a used ‘14 jk sport with some super skinny 33’s. It doesn’t look right to me but preforms awesome on the trail.. as a noobie, can you explain a little why the skinny 33’s out preform the 35’s?
I'm running 33's on a Teraflex leveling kit and I have done some minor wheeling and it has been fine so far , I'm going to be going to a more advanced trail this summer but I really can't upgrade to a 35 because I don't want to spend the money on regearing and it is my daily driver.
! AWESOME !
Well Done Class !
Very Important Tips and Technical Information For a Beginner (Like Myself and Many ... Thousands ...More) .
Nice Cars & Gears !
Thanks a Lot !
Best Regards !
Thanks. Wow. 8 minutes circling back and 3 minutes making a second point.
Okay, I'm convinced that I need '40's' ....................... and that's just for the Honda Odyssey !
A buddy of mine had 31s on his Kia sportage. Thing looked like a monster truck with those on it. Lol
It only lasted a couple of years. Everything broke.
Great video, this is really helpful. Thanks!
I have a 2018 JL rubicon unl. with 33s and 4.10 gearing. Next will be a compressor, then a 3.5" terrraflex lift and 35's.
Great explanation! Definitely helps the 33s vs 35s debate.
Definitely helps a bit! I'm glad you like the video! Which do you prefer? -Brian
Totally agree. I am currently working on my set up. 285/75/17 Nitto on stock wheels with a 2" AEV lift/leveling kit and flat fenders.
would that setup work without the lift? I just swapped out the fenders and looks like it would work?
It might. The Nitto is supposed to measure out at 33.8". The 2" lift should give a little breathing room and maybe a little more articulation.
Considering 285/70R/17 ko2s on stock height & wheels. Suggestions?
I'm running 35 s on a 4 in lift on wrangler X ,it aloud me to Ford a creek that had flooded the road, my previous grand Cherokee would have been flooded , I only had 18s on it . There was only one way I could get to work. Jeep life forever
Thanks so much for the video. So informative. I have a 16 Tacoma on 31 KO2. But looking to either update to a 33 or 35. But the truck is a daily driver too so maybe the 33 would be better. Thanks again!
Great video! I'm purchasing a new jk 2 door & am going after a lcg look I saw on a Jeep concept vehicle, with 37s, a high top fender & just a 2 inch lift. But I'll start out with just the fenders (made by Notch I believe) and 35" Goodyear MTRs.
Jarret, that sounds like a solid start for your build. The 35s will still be intense and do the job off-road. And later on the upgrade will be even more fun! Let me know how it goes and thanks for watching! -Brian
I want the look and the ability to trail it once or twice a year - the easy stuff, lol. I will do lift and 2" lift and 33s.
Why not a 3inch lift? I'm in the same boat. Was thinking a 2.5, but the 3 or 4 inch RC lift kits are pretty affordable. Thoughts?
Best size tire for your Jeep? - A Toyota... JK, just break'n your ball Jeep guys
In the video he states that the 33" are a 305/70/17, that isn't a 33" it's 34" (33.8 to be more exact), but anything greater than 33.5 is a 34".
My everyday 4x4/road trip 4x4 is a Trail Teams FJ Cruiser on 295/75/16 Nitto Terra Grapplers + KMC Enduro Pros and other goodies: yellow top Optima, lights, CAI, Unichip ECU, SC. With stock height it ran with 285/70/17 Nitto Terra Grapplers with no rubbing.
2010 3.8L manual tranny, 35" tires, 4" lift, 5.13 gears, grizzly lockers, yukon D30 axels, runs great
really informative video. it answered a lot of questions i currently had.
I am glad to hear it Mario! That was our goal with this and while there still be more options for tires and gearing out there I think this really touches on the majority of discussions. Which tires are you running, or looking to get for your rig? -Brian
Just bought 2017 rubicon. Thinking 37s with 4" lift.
Do I can go 4 inch lift and 37 tire be ok all not?
Sunny Johal that’s a great combo lol that what I’m going to do you should update on how you like that setup
IMO 31's-33's r good for those who like the look and off road a bit but also need 2 commute often in their jeep 35's-37's and above r for extreme off roaders and aren't gonna commute with their jeep
Showtime_Kick123 or people compensation for somthing
Showtime_Kick123 i daily drive on 35s bud
35 daily driven!
Noe Lopez yup i drive on 35x12.5 with 15 inch rims
35x12.5x17 witha 3 1/2" lift going to a 40x13.5x19 with a 6" lift for a daily driver and weekend wheeler
Great video! I was running 33s with a 2 1/2 lift for dune bashing when we lived in Dubai, but now back in the states, I think you just sold me on at least 35s. (Or 33s and a good winch and skid plates ;-). )
Don't forget about 34's either! A 305/70R17 or a 285/75R17 could work pretty well for you too! -Zach
35s are the best all around tire. I have not re geared mine yet! However it does fine the way it is, I am going to go with 488s soon!
Would that 33" combo work with a stock JK suspension?
The log was turned on its side when you drove over it with the 37s.... The 33 would have cleared it as well if it was laying the same way
When a business will be less than straight forward and honest in their video, can you really trust them to be honest when you buy products from them? Deceptive marketing makes me really wonder what else they will be deceptive about.
@@Daveinet Don't get to bent out of shape...they were just trying to prove a point.
@@xbpbat21x you can't prove a point when you're misleading the public. That's called lying, anyway you look at it
@@ronaldledgerton878 To me it's clear that he's explaining the concept of "tire clearance" which is basically what he said when he started. I don't see anywhere that he's trying to sell anyone on 37" tires or that he is trying to say that 37" tires give you "X" amount of clearance over a 35". Maybe if he would have taken out a rule and said "there is exactly this amount of clearance with a 37" tire" it would be misleading.
The knot on the log was facing upwards.
They don't have any reason to lie about the height because everyone knows 37's are taller than 33's.
Awesome video guys! Keep up the good work 👍👍
Thank you, Remi, we are trying our best! This was one of my personal favorites because it is always something on a Jeep owner's mind. Glad you enjoyed! -Brian
I thought about a 3" lift w/ 33's but fortunately very early on getting into off roading Jeeps, many told me, their TJ became very sluggish going from just 32's to 33's in addition to a domino effect of needing additional expensive parts. And I'm glad I listened! Because I drove a TJ with this set up and it didn't have that low end torque and was very slow off the line. And most of them returned to 32's while some fell for the aftermarket bait, very expensive bait.
I get many who want to know what is the perfect build. Which is not easy to answer because everyone does different things with their Jeep.
But I would like to share mine since my '05 TJ Rocky Mtn drives and handles absolutely amazing on and off road.
Keep in mind, I am NOT a rock crawler, I'm an adventurer who takes the family beach wheelin, beach camping, surf fishing, and we hit fun, moderate trails in the fall and winter getting to our favorite fishing holes and camp sites. Which is why the build is for what's near and for what we do, nothing was put on this TJ unnecessarily for show. I see too many "spotless Jeeps" with 33's - 38's.
As long as you have good off road instincts and common sense, a modest, high quality build will allow you and your family to have a lot of fun!
All in, I'm at $25k with my '05 TJ Rocky Mtn. And I can honestly say build wise, I'm done!! I might Raptor line it since the TJ has a few rough paint spots and won't ever have to worry about off road pinstriping again. The best part is, this TJ not only keeps up, but outperforms a lot of these $40k - $75k JK's & JL' s. Due in part to people's inexperience and just "over building". The '05 TJ has a modest build, yet is extremely capable, durable and best of all, affordable.
I encourage any Jeeper to search for a rust free TJ 4.0 I6, preferably stock, 3.73's w/ LSD and a Dana 44. And to use my build as a "guide". But I highly recommend this build for anyone who is an adventurer, not a rock crawler. Best of all, it will eliminate you from chasing your tail, the aftermarket will have one less just empty every pocket victim out there.
It was a lot of trial and error but it has been well worth it.
2" Old Man Emu coils
32" KO2's or 32" BFG MT's
Quadratec Baja alloy rims - perfect backspacing - no rub!
Currectlync steering
Freedom Off Road front adj track bar
M.O.R.E steering box brace
JKS quick disconnects
Freedom Off Road front lower Adjustable control arms
The rest are Fixed Detroit Axles
Transfer case drop kit
Fox 2.0 Shox
Fox steering stabilizer
Professional 4x4 shop to do the alignment
Since doing this, I have had the best experience with any vehicle I've ever had.
Staying with 32's allows us Jeepers to maintain that great low end torque, saves us a lot of money on unnecessary aftermarket parts and still be able to wheel most anywhere. It's the best of all worlds!
One of my favorite mods was added a Banks cat back exhaust giving it a throaty growl, but not obnoxiously loud. Absolutely perfect for the 4.0 I6.
Most importantly, be honest with yourself, build your TJ for what you will be using it for. And know YOU CAN do great trails and much more with just a 2" lift and 32" ko2's or MT's!
DO NOT let the aftermarket pushers fool or shame you into thinking you "need" 33" - 40" tires and a 5" lift to wheel. That's 🦬💩! They know full well, once they get you at 33's, it's a freaking cash cow for them! Because you just embarked on their multi thousand dollar build conveyor belt. And it's 100% unnecessary for moderate wheelin'! Your axles, drive train, drive shafts, engine, gearing and a host of a lot of other stuff now "needs" to be upgraded. The aftermarket pushers feast on naive people. Don't be that guy! Like cereal companies saying breakfast is the most important meal of the day, the aftermarket will continue to take advantage of the misinformed.
O|||||||O
🇺🇲 Only in a 2 Dr 🇺🇲
'41- '06
It would be cool to know what the recommended gear ratio for the various tires sizes would be, as well as the other factors you need to deal with, such as drive shaft length requirements, lift requirements, back spacing and fender clearance....etc.
rogue109 they have a chart somewhere online that will give you a good idea on what gearing you need for the tire size and transmission and engine you have. As far as drive shaft length I'm pretty sure once you go above a 3.5" lift then it becomes a concern along with many other components on the Jeep. I'm running 35s and 4.88 gears only because I wanted to be able to go to 37s later. At 70 mph I'm at 3000 rpm. Kind of high but I'm still getting 16-19 mph.
rogue109 I forgot to add that wheel back spacing for 35s and up should be no less than 3.75. As far as lift vs tire size. 2.5" you can run 35s all day just make sure you install the appropriate bump stops to prohibit any rubbing. 37s and up I would not run anything less than a 3.5" lift with proper bump stops and trimming the pinch weld in the rear wheel well. If you do run 35s or 37s and have a Dana 30 then there is possibility of bending the C's and axel it you plan on taking it off road a lot. Truss and gussets fix that problem.
Thanks man! Good info.
Rouge, If you like me your Jeep is on pavement most all week and weekends its play time, so unless your building a "hard core rock crawler" here is the formula you need to use. But first you will need to know the factory "OEM" gear ratio, "original" tire size.... that information can be found on your build sheet or you can request a "copy" of your build sheet online at the Jeep site... link is below - takes about 2-3 days to get a response......
formula is (new tire size multiply by factory gear ratio divide by factory tire size).....
Example---> my grand cherokee WJ came with metric tires but metric can be converted to inches. say i want to go to a 35" tire the formula is 35 multiplied by 3.73 factory gear ratio - divide by 29.1" factory tire = gear ratio.... so in my case the formula looks like this....
( 35 X 3.73 / 29.1 = 4.48 ) so I would need 4.48 gears or as close as I can get.....
this will keep your torque curve the same, shift points and speedo close to the factory setup as possible. (drive-ability)
just give Jeep the make, model, year and VIN number. jeep is now owned by FIAT so the more info you give them will avoid (confusion) them looking in the FIAT database.
Just request a "copy of the build sheet" at Jeep customer service-----> www.jeep.com/webselfservice/jeep/EmailPage.html?appStr=wccs&titleStr=Contact+Jeep&familyStr=brand&franchise=J&actionURL=%252Fwccs%252Fbrand_forms%252Fus%252Fwebform.jsp&promotion=null&category=U
My tires are metric, but they are 31.5" I believe, or quite close to that and I have 4:10 gears (I specified this when I ordered the Jeep the options were 3:83's or 4:10's). So using your formula that comes out to 4:03 for my stock setup. I'd like to run 35" tires, so like you I guess I'd need 4:48 (which I'm not sure exists, so something close to that I guess).
Thanks so much for the formula and the links and stuff, that's really helpful! From this info I was searching for gear ratios and found this handy chart that seems to go along quite well with your formula: www.morris4x4center.com/jeep-tires/tire-gear-ratio-chart.htm
RIPP Superchargers will fix that power problem easily.
I was thinking Magnusson supercharger.
I run 33's 4,10 gears. core 44 rear axle w air lockers. stock 35 front axle for now.. works well
Just put 295/70 R18 on our '18 4drJKU, little bit of rub on tight turns, still have factory fenders on as well. Have the standard gears as we pull a small full size camper. We like the factory wheels, so wanted to keep them. Not sure if we need to change gearing.
'this obstactle we found on the trail' clean sawed wood lol
if its a maintained one, thats normal.
🤣🤣
If you place it, then walk in a circle, it becomes "found".
all terain 33's vs mud tire 37's... and where were the 35's on the trail? meh
I got 35x12.50 courser mxt’s on my jku and love them off-road but it’s my daily and they are pretty god damn loud. Still getting 17-20mpg surprisingly. It’s a 6spd and 3.6
While I drive a Gladiator for that the Falkens that come are Heavy even at 33. I can safely move up to a 35 and lose weight w/ any other tire. Though the change in wheels is a whole diff story.
I think moving to 35's and above are good if you also plan on tuning up for a little bit more power.
I can save you time, no need to watch this video...If you cant afford things like axle trusses, long arm lift kits, and regearing stay with a 33" tire and dont wheel it too hard ....done.
HAHA, Amen brother. Can you please make this into a 15 sec CZcams vid for the non reading crowd!!!
meh long arms are overrated
said the T-rex
Define too hard lol
Read enough forums @bdd1469? You dont need any of that to run a 35 on a JK except for gearing if your rocking a JK Sport. I run a 35" tire and wheel it hard with zero issues. Stop spreading false information.
Portal's. 'Nuff said.
$20,000 is a lot.
I have 33s with a 4 inch ome lift looks good and very good off-road
Not running a jeep, but still going with the 33.5" tires because they just make sense, re-gearing it does makes sense, but still 85 MPH will only be 2850 RPM. I will still have an easy day running at speed, but a 74:1 crawl ratio in an automatic if I through 5.13 gears in it.
40’s are the new 33’s!
35" for me :)
I found running 34” tires with 4:11 gears and an automatic transmission puts me right in the ballpark. Still plenty of power and still getting some ground clearance. But of course like the man said, it’s all about what ya going to do with your Jeep.
what size lift and 4 door to 2 door
hockey fantic teraflex 2” leveling kit and 11/2 wheel spacers
When running 35s such as I am currently, when you are on the technical trails that have nothing but rocks you still hit the diff so yepp it's time for 40x13.5x19 and a 6 inch lift goodbye 35x12.5x17 and yes this is a daily driver and weekend wheeler
Dana 30 front axle, 33" Max, or stay off the skinny pedal on the trail, or you'll be changing front axle joints on the trail. 20 years experience in a jeep club tells me so.
you should also consider, my 2 door, cause of the shorter wheel base bottoms out less w/smaller tires than the wife's soccer limo 4 door w/larger tires, yes gentleman, weather I drive or she does, lol
just to be xtra clear on this debate so you know my opinion, gonna build, wanna build, buy older if possible, I've owned jeeps my whole life, back when nobody wanted a jeep cause they were crap, my 04 tj is the best I have ever owned, Best off road, Best built, my wife's 14 unlimited, ? only good part is the 6 speed manual, the rest is poorly made and I hate to work on it, BUT, it is an absolute highway star, goes faster than any wrangler I've ever driven, w/o a doubt, it will for 100 m.p.h. ALL day long
I disagree, the Dana 30 front could for sure withstand 35's when it comes to medium offroading. Aslong as your not bouncing off boulders, its fine. Just my experience though.
Cheers.
I'm looking at an 05 Rubicon.
35s Ok on the Dana 44s without regearing?
Matt Lee doesn't matter which axle you have, 35s are gonna require a regear unless you want your jeep to feel like it has no power and it will get insanely terrible gas mileage. Probably want to go to 4.88s or even lower gear ratios like 5.13s.
How big can I go without it messing with my mpg or having to re gear?
Even with 33's your mpg will be worse than stock. With 33's, you won't need to re-gear, although I would still recommend it as the stock gears aren't that great. 35's, you'll should def. re-gear imo.
I’m running a rough Country 4.5 inch lift on 33r15,s and it’s way more lifted than any of those wranglers and doesn’t require any re gearing thankfully , going up to 35s on stock axles will ruin your transfer case and axles unless you upgrade those
2014 JKU with 37x13.5x18 Mickey Thompson MTZ, 3.5 Teraflex Lift, 2 in front/1 in rear leveling, long arm kit, and a 1.25 body lift, Hydraulic assist steering, Bilstein shocks. Love the set up, next is RIPP Suspercharger, RIPP Coil packs, and idrive controller. PNW SABERTOOTH
Just do the LT V-8 conversion and your never look back