New kitchen sink tap & plumbing
Vložit
- čas přidán 30. 01. 2024
- Fitting a new kitchen sink tap and waste while tidying up the plumbing. Less joints equals less leak potential and removing unwanted hot water valves.
Using soldered on this job and cutting out the waste pipes which was blocked pretty bad!
New trap with washing machine spigot with new waste pipe gives me confidence of no bad smells or leaks from the old waste pipe.
Hope you enjoy!
Absolute masterclass. So many little tips 👍
So satisfying. It's been a long time since I've sat and watched every second of a YT video!
Haha oh wow thank you! Really appreciate. The next one you will love it’s a banger!
I am only joinery but I do do some plumbing and I have always liked the soldering but after seeing some over plumbers on site using these crimping tools I do like them makes it easier for me 😊
Lovely job. Just discovered your channel recently. Your jobs are a work of art, looking forward to new videos. Especially like to see the tools you are using. Please list them in future for our reference. thanks ! - Right im off to find one of those wera wrenches...:-)
I’ll be doing a tool bag video this weekend mate ❤ thanks for watching I really appreciate it
Very good video. I’m looking forward to your tool box video 👍
I will film it this weekend pal
Not how my plumbing goes :) Nice job!
Haha thanks mate
I dont know why people are criticising this work so much, especially the soldering.as long as it doesnt leak,its all good
Excellent. Thank you for sharing!
В начале ролика шедевральная лента на сливе, кто то додумался же 🤣 и при прошлом монтаже сожгли участок мебели.
excellent job ever.
How many follwers have you bought for this?
Also Respekt dass ihr da alles lötet bei und lötet fas keiner 😁
Und der Arbeit denn Sie machen ist ganz gut.❤
Very clean work, huge improvement. Why no putty around the drain?
Neat job 👏🏻
Thanks mate!
Like the ratchet spanner
I’d have used rad valve tales instead of wasting the M/F ‘s other than that nice job and I’m still well jel of that spanner 😂😂
Haha yeah I’ve never used rad tails I should do tho I just always have isolators lower for some reason 🤣 mainly to stop the water coming at me I spose
I'm a retired spark but have done quite a lot of this in the past I have always used push fit for under sink never liked the solvent weld fittings
Sorry you got a link to the site for the pipe bender
I lookEd up we bed copper no luck ?
Great job so satisfying to watch... i love that wrench ur using bro... cant find one here in Qatar... i only have that knifex brand though
That is Wera 6004 L or XL
You are really professional in your work . I wish you are contactable help fix my heating system
What camera do you use?
bon materiel et bon travail
How much do you charge for this job?
Alike it,good job 😂😅.
Hi Nice video
I am wondering wot is the pipe bender you used
Not seen that before
Thank you
Hey we bed copper in the uk, it’s faster and saves fittings 😍😍👊
Great video. What olive compound are you using?
Slictite from laco but jet lube is fine, I just prefer the brush in this bottle better
What model is the Wera spanner you were using, and what do you think of it, looks new.
I got a L and XL. That’s 19-24mm and 24-32mm.
The 19-24 is for 15mm nuts and the 24-32 can do both 15 and 22 but the head is pretty big. Personally I’m really loving them at the moment. I bought them myself so I hope they last!
I’ve had my set of them for 2 years now, love them
@@matthewtrueblood408 that’s great news I had a man today say the plastic bit come out and spring fell
Out
Well if they do, don’t forget Wera have lifetime guarantee. My 1/4” ratchet stop ratcheting last year. I called Wera, they told me to package it up and send it to them. 3 days later I received a brand new one in return.
You could just wipe the flux before you solder save yourself time cutting the over spill over solder
Could of done but didn’t think it was going to run after already prepped that bit 🤣
Why didnt anyone mention the S trap?
What is the adjustable spanner you are using??
Wera joker L 19-24mm
Yeah I’d like to know too does it do 22mm as well.Nice job your getting stick off a few but don’t mind it your work is good because you have no leaks that’s the most important thing and no piping errors.
@@mmplumber thanks 😊
Could you please send the link for the 15mm and 22mm joker spanners please. God bless you
It’s the wera L and wera XL. XL does 15 and 22 but it’s a big head
Thank you mm. Its on me list😊
@@mmplumber sorry mm i forgot to ask you about them cool copper pipes cutters too.
@@kusaru7697 cutters or cleaners?
@@mmplumber pipe cutters please
Hi ! You’re originally from which country please
No vent?
What grade cloth is that red one you used to clean that solder drip pal
And is that a Wera joker 24mm you was using
@@Zach-tm7obit’s a 19-24mm joker which I think is the L version. The cleaning pads are just ones I can buy from merchant so I don’t know the grade 😢
What was the ratcheting pipe wrench you were using?
@@aaronjohn6586 wera joker L 19-24mm
I have that tapp
What blow torch is that please?
Javac flexi torch this one
1 critical part missing. Anyone know?
I would have worn gloves for the waste demo.
I agree, especially that kitchen sinks are cat 5 plus people pour all sorts of acid based unblockers down too.
Что за белая паста
Jointing compound
i dont get the point of cooling the hot joint with more flux lmao
It’s not cooling the fitting it’s cleaning it
@@mmplumber lol what does that achive, no matter what you still use your cloth or the scotchbrite pad or whatever you use to clean the whole pipe and fitting so that smering of the flux if you did it or not it makes no difference lol
Your joints look awful mate, using too much solder. You burned the fuck out the base unit too. No negativity, I was inexperienced before I became competent too. You know what you're doing, just some fine tuning 👌
I didn’t burn anything mate that’s the previous install I took out.
Was brilliant.
Then cheap isolation valves.
You know the ones, 200 in a bag for £9.99
Other than that, brilliant 👏
You should have sweated in 1 go.
I had water constantly dripping on the hot so had to fit a valve
You did its wrong I would of stuck my flute in to the pipe first
🤣🤣🤣haha
As a plumber myself this is one of the worst soldering welds I have seen. Jts not neat and tidy at all
An inexperienced plumber then if that's the worst you've seen. It's not a remarkable job but not exactly awful. At the end of the day it's under a kitchen sink and a sight better than the previous work.
If your on about mine, I made sure I left my pipework tidy and clean, and cleaned off any dripping may had accidentally
I'd rather put a bit too much solder than not enough and have to do it all over again.
@@JackTheAwesomeKnot my boss says leaks cost more than solder 🤣
It's not the best, maybe. But what do we know? It works, and it is for water drainage anyway which won't handle pressure as much as source water line.
If you ever have to work on plumbing that has earth strap connection ,if disconnecting earth straps don't thing its ok to do this ,most qualified plumbers know how dangerouse it can be ,if cant turn main power off then need have jump cable special earth clap temporary bond between earth to copper pipe ,failure to do this in the event have earth electrical leak will put 240v live to earth will kill you of touch earth cable and copper pipe so best turn off mains where possible .stupid videos shouldn't be on here not right when things can easily kill you I'm electrician always know this about earth cable .