@@these7seas it makes the pocket quite often. Super sharp as well. Side note, turns out, I just traded for the rask you had. Really surprised you sold that one off!
I now own a drop point Sebenza 31, harpoon Umnumzaan, and Insingo Inkosi, all PJ, all in MagnaCut. I can't believe how good these knives are. I don't know which I like best.
I prefer the Insingo in the small and the standard blade in the large, though the Insingo large is also amazing. The drop point doesn't give me enough straight edge in the small for my preferences. The glass blast is only being applied to inlaid models that can't be given a full spa treatment, so the PJ and the Micarta inlay models don't come with glass blast but you can send them in to have it done by request for the same cost as a spa treatment.
I have this but glass blasted with silver hardware. Love the insingo blade shape. I have a matching small sprint run with S35VN. Love Magnacut and every new CRK I buy I want it in Magnacut but I still love S35/45. for my everyday use, I will never see any huge difference between the different blade materials. Got my large insingo Seb direct from CRK too. wait wasn't too bad. Maybe took about a year to year and half, if I'm remembering correctly. Think I ordered it the first day the order was open for these in Magnacut. Congrats man.
It really is! It’s the sharpest factory edge I’ve ever had from CRK! Cuts crazy good, you can tell the difference between this and their s45vn and s35vn for sure
I went PJ for my small 31 insingo. I want a storied piece, one that tells a tale in the years to come. I have a small inkosi with inlays as well as a large with inlays - they’re great - but I only got them because I thought I was missing out on something. I wasn’t. Went full circle to when I got my PJ 21 all those years ago, they’re just cleaner. All the best with your decision! :)
@@these7seas and now a proud owner of a large sebenza 31 magnacut! To my surprise there were no leather pouch. I looked it up they cost $35 from Chris Reeve knife ...
Absolutely gorgeous with the gold. How did you get it direct from CRK in less than a year? Back in 2008 I special ordered a large Regular Sebenza (as it was being discontinued) with gold hardware, double thumb lugs, and polished blade. Would love to have that one back! Managed to snag a plain large Insingo 31 Magnacut and I’m stoked as I’ve been waiting for years. Not like I had been regularly checking dealers or getting on a notification list like I should have. I just happened to look at the right place at the right time. If I decide to order one again it will be like yours but with polished blade and glass blasted scales.
That sounds like a beautiful config! Yeah at the time I ordered it, they may not have had as many in the queue as now. I heard it’s over a year wait now (more like several years) to get one ordered direct. But it’s worth the wait!
@@these7seas yeah they rapidly went from 1-2 years to 4 years and now 6 years! Probably conservative estimates though and I imagine you would receive most orders sooner.
Yeah. I mean it doesn’t hurt to just put in your order and just forget about it. They don’t require any down payment and once your order comes up, they’ll reach out to you to see if you still want it and if you do at that point, you can pay. If not, then there’s no penalty fee or anything like that.
Hi Daniel-it’s a large Sebenza; love the Insingo blade shape and a favorite-also picked up a 2023 Harsey folder with dragon scales in Nicol’s Damascus. Love your taste in knives-we both gravitate to same ones.
I recently bought a Large Sebenza 31 plain with insingo blade. (In Magnacut of course.) I am extremely excited because I’ve never owned a Insingo blade shape before. Also FYI the Umnumzan wasn’t the knife for me. I passed it down to another person.
Den som väntar på någonting gott, väntar aldrig för länge 😊😊
Fantastic choice. Always enjoy watching your videos.
Hey I appreciate you for checking out my vids!
Great video!-lyd
Hey you!!
Recently got a insingo Sebenza plain in OD Green CERAKOTE . Absolutely love it.
I have the same configuration, but with a DP blade. Awesome knife! Congrats!
Classsssic!!
Just grabbed the same blade with blue hardware at Bladeshow. Super excited to have this one for years to come. Nice vid!
How do you like it thus far?
@@these7seas it makes the pocket quite often. Super sharp as well. Side note, turns out, I just traded for the rask you had. Really surprised you sold that one off!
CRK is always a go-for option😍
Same for me. I’ve gone through hundreds of knives at this point and always come back to CRKs
Also, when would you do a final review video on your custom Sebenza?
I now own a drop point Sebenza 31, harpoon Umnumzaan, and Insingo Inkosi, all PJ, all in MagnaCut. I can't believe how good these knives are. I don't know which I like best.
I prefer the Insingo in the small and the standard blade in the large, though the Insingo large is also amazing. The drop point doesn't give me enough straight edge in the small for my preferences.
The glass blast is only being applied to inlaid models that can't be given a full spa treatment, so the PJ and the Micarta inlay models don't come with glass blast but you can send them in to have it done by request for the same cost as a spa treatment.
Beautiful Sebbie, health to enjoy man! 🍻
Much appreciated! I really like the lines of the Insingo for sure
I have this but glass blasted with silver hardware. Love the insingo blade shape. I have a matching small sprint run with S35VN. Love Magnacut and every new CRK I buy I want it in Magnacut but I still love S35/45. for my everyday use, I will never see any huge difference between the different blade materials. Got my large insingo Seb direct from CRK too. wait wasn't too bad. Maybe took about a year to year and half, if I'm remembering correctly. Think I ordered it the first day the order was open for these in Magnacut. Congrats man.
Thanks! Yeah honestly in real world use I don’t notice a big difference between these higher end tier steels. They all cut well.
I have a Magnacut tanto en route with a single thumb stud. First CRK. anticipation…
I think all the inlay knives are glass blasted the plain is sand blasted, glass blasting optional. Congrats. Enjoyed this video.
Plain Jane, thats it!
All my 6 Reeve have MagnaCut! My Favorit and EDC is Small Inkosi Tanto, it‘s Like an english Bull Dog, can cut Cigarett Paper!
how do you like it in the hand in compared to the spartan?
What do you do for work?
Insingo shape is sweet goodness
It really is! It’s the sharpest factory edge I’ve ever had from CRK! Cuts crazy good, you can tell the difference between this and their s45vn and s35vn for sure
Man i cant decide whether i want micarta inlays or plain for a small 31!
I went PJ for my small 31 insingo. I want a storied piece, one that tells a tale in the years to come. I have a small inkosi with inlays as well as a large with inlays - they’re great - but I only got them because I thought I was missing out on something. I wasn’t. Went full circle to when I got my PJ 21 all those years ago, they’re just cleaner. All the best with your decision! :)
Just ordered a large Sebenza 31drop point!
Congrats! From the CRK mothership or a dealer?
@@these7seas and now a proud owner of a large sebenza 31 magnacut! To my surprise there were no leather pouch. I looked it up they cost $35 from Chris Reeve knife ...
Absolutely gorgeous with the gold. How did you get it direct from CRK in less than a year? Back in 2008 I special ordered a large Regular Sebenza (as it was being discontinued) with gold hardware, double thumb lugs, and polished blade. Would love to have that one back! Managed to snag a plain large Insingo 31 Magnacut and I’m stoked as I’ve been waiting for years. Not like I had been regularly checking dealers or getting on a notification list like I should have. I just happened to look at the right place at the right time. If I decide to order one again it will be like yours but with polished blade and glass blasted scales.
That sounds like a beautiful config! Yeah at the time I ordered it, they may not have had as many in the queue as now. I heard it’s over a year wait now (more like several years) to get one ordered direct. But it’s worth the wait!
@@these7seas yeah they rapidly went from 1-2 years to 4 years and now 6 years! Probably conservative estimates though and I imagine you would receive most orders sooner.
Yeah. I mean it doesn’t hurt to just put in your order and just forget about it. They don’t require any down payment and once your order comes up, they’ll reach out to you to see if you still want it and if you do at that point, you can pay. If not, then there’s no penalty fee or anything like that.
@@these7seas Yeah they’re great like that. I’ve ordered direct a couple times. One time I think I had to turn it down when the time came.
What do you think about your strider sng 3v?
Honestly one of my favorites. Strider really dials in their heat treat for the 3v.
I have a umnamzaam order with them, should be here in 6 years LOL
Yep! Your patience will be rewarded. They may have moved on to Magnacut 3.0 at that point 🤪🤪🤪
the wait time has gotten worse. It's up to 3-4 years now
Yeah….they say patience is rewarded 😜
Btw an Ultem bead lanyard would look fantastic with the gold anodized hardware. Just a thought.
I never thought of that, thanks for the recommendation!
Putting the japanese motive on USA knife is littlebit... eh.. :D
It’s like carrying a razor in your pocket.
This came out as I was unboxing a Chris Reeve Sebenza 31 Insingo blade in Magnacut with Box Elder Burl.
Very cool! How you liking it so far? Large or small?
Hi Daniel-it’s a large Sebenza; love the Insingo blade shape and a favorite-also picked up a 2023 Harsey folder with dragon scales in Nicol’s Damascus. Love your taste in knives-we both gravitate to same ones.
I recently bought a Large Sebenza 31 plain with insingo blade. (In Magnacut of course.)
I am extremely excited because I’ve never owned a Insingo blade shape before. Also FYI the Umnumzan wasn’t the knife for me. I passed it down to another person.
@@JustAnotherDayToday how you liking it? Im looking at the same version but wondering if I should get a large or small.