Did you ever think homemade Clear Ice was this easy to make? Get some Liber & Co fig syrup: bit.ly/CTandLiber Check out our CURIADA collection of bottles here: bit.ly/cocktailtimecollection If you like what we do, you can also support the channel here: 👕 Merch: my-store-11171765.creator-spring.com 🎩 Patreon: www.patreon.com/cocktailtime 🛒 My Store: kit.co/KevinKos 🌍 Web Page: www.kevinkos.com/
Yes, I started doing my own clear ice with the directional freezing technique. To avoid having „smelly“ ice, I bought a dedicated clear ice freezer. My friends believe I lost my mind at first, until I served them my cocktails with clear ice. Lots of aah and ooh 😅
@@PlainVidzTake any insulated mug fill it up about 2/3 and leave for about 18-24 hours. Top will be frozen ice and bottom will be water. Can be a little fiddly to get out and might need to adjust times but the insulated coffee mugs wihtout a lid on give you that directional freezing as they are double walled on outside usually
@@PlainVidz just as AngryCocktails said, [he has very useful stuff on his channel as well] you a cup that looks like a thermos inside, search up a yeti cup and then you will see what i am talking about [the mark doesn't matter, as long as it's insulated, even a cheap thing will work]
@@PlainVidzif you buy any thermal insulated water cup and fill 2/3 with water, leave it in the freezer with the lid off for 18 hours you have a perfectly clear ice cylinder. (Make sure the cup has no internal lip that will stop the ice from falling out)
KEVIN!!! This is CLEARLY a great video!!! I love making clear ice!!! My wife has threatened bodily harm bcus I take all of the room in the freezer!!!! CHEERS!!!
Try this: make the insulating box open on the bottom, but closed on top, such that you lower it down over the container. This way, you get directional freezing that rises from the bottom rather than descending from the top. Any air bubbles that get pushed out of the ice rise out of the ice, so you don't get bubble inclusions, which can still be a problem with top-down directional freezing.
This is exactly what I am planning to try with my silicone moulds, leave the bottom uninsulated and the sides and tops insulated to let the gas escape as it freezes.
I started out using a low quality freebie travel coffee mug. Only made two big cubes, but fit and worked well in ~24 hrs. Now I use the small square cooler that amazon sells. Now I only have to do it once every few weeks for what I need at home.
Excellent! This is the exact method I use. I have a freezer with drawers with a maximum height of 14cm. I use a tupperware box which can still be used for its intended pupose when not making ice. With such a small clearance, it is important to judge when to take it out, in order to get useful sizes of ice from it.
I have a few clear ice molds, a couple of small coolers too. I also have some cheap molds that I can position near the top of a cooler and get clear ice roses and little diamonds. Ian obsessed!
I'm a bit more on the extreme side of clear ice I make glass wear, cubes, other fun stuff with frozen floral and herbs. My blocks are about 20"x 9 x 12 I use a chainsaw and I built my own deep freezer unit that acks just like a clinebell. All my cubes are cut with a meat cutting bandsaw. I use the fusing technique to make my glasses.
I use a cheap 5 quart cooler with the lid removed. I find 36 hours in my freezer give me the thickness I want. I cut the ice with my oscillating saw, with a blade I only use for ice. To finish off the cubes, I heat up a frying pan and using tongs to hold the cubes I can square them off and polish the sides.
I started making clear ice using Kevin's build-your-own cooler method. I'm pleased to report that it was exceptionally easy and successful on the first try. Below is an explanation of what I did and may be a useful resource if you're in the US. I used a 6"x12" plastic container from Target ($3), cut R5 insulation board from Home Depot ($8) to fit around the sides and bottom, then wrapped the whole thing in duct tape (free?). I skipped the inner sleeve because the R5 board has a much higher insulation rating than typical foam and the plastic container slides out of the insulation easily.
When the freezer too full to fit the cooler in, I do this with rectangular margarine container but use 2-3 layers of corrugated cardboard boxes for the insulation.
Cool video! It made me immediately started looking into doing nested cambros with a hole drilled into the top vessel to help separate it from the cloudy ice below. Or a myriad of 2" x 2" x 2" tupperware nestled neatly into a shallow, insulated tray.
I'm using double wall stainless tumbler like this! Pour water in, put it in the freezer and let it freeze about half way, so you can get the ice out easily. It produces only one ice chunk at a time, but it is enough for me.😀
Hi! I love home clear ice!!! And I enjoy make it a lot!! My friends say i'm crazy about it, they don't understand what is really important in life! Jajaja. Cheers from Argentina!
I bought a small Wintersmiths clear ice cube freezer that makes 3 large ice balls (2.5" dia) and 3 small balls 1" or slightly smaller. Hard to get it to work perfectly, but it is cool to have a large ball in an old fashion or a negroni. I want to experiment with buying some silicone ice cube trays and modifying them to try and freeze in a similar way to your approach. Carving doesn't really appeal to me, but you can make some beautiful pieces of ice that make your cocktails works of art. Thanks for the demonstration!!
I use an even smaller container: a straight-sided water bottle cut in half, with two beer koozies as insulation. It only produces one ice cylinder though.
I bought the Amazon container, luckily it fits into my freezer. The only downside is that shaping the ice is not easy with kitchen tools, so either I need to get proper tools for it, or some molds which would give me correct size blocks from the get-go.
Nothing like going through all this work to end up pouring warm liquid onto a cube straight out of the freezer-the ice will immediately crack and ruin the presentation. To avoid this, take out the ice and let it sit before using. Another option is to user a mixer with different ice to chill your drink first before pouring.
I've been making my own ice with the red version of the cooler from Amazon. I'm going to experiment with using molds inside the cooler to see if I can make ice for my collins glasses easier.
A great tool for sawing ice but still in a compact, easy-to-store form factor is a foldable pruning saw. Works great due to the double set of deep serrated blades, and definitely cheaper than the 'ice saws' that seem to cost a fortune.
When I was a kid, my dad build an electric saw for styrofoam. He never patented it. I wish he was still alive today to see your video, he would have seen a possible use for his saw.
For big ice cubes I use a small cooler but for clear ice spheres I've made my own cooler. I've bought a silicon ice ball mold, drilled a hole in the bottom of each sphere, made a styrofoam box and cut it that the ice mold "sinks" in the middle and since I didn't want my balls xD to have contact with the styrofoam I coated the box (on the inside) with food-grade silicone (labeled as clean room-grade or something like that). It looks junky, probably I've could bought an clear ice ball maker cheaper but... :P
I use a simple plastic food takeaway container, freeze up a big block of ice and cut away the parts with the bubbles. The ones with bubbles double up as ice for shaking or just ice for soft drinks Granted, nothing beats clear ice from dedicated setup, thanks for the idea =)
I use the 25$ cooler you mentioned for my clear ice. Only difference is I let the whole block freeze completely. The cloudy portion I use for crushing in a Lewis bag since.
You’re right. Once you make clear ice, you can’t go back. You also become a critic of bars’ ice. “Nice drink, but the ice sucks.” I make clear cubes, Collins spears, chunks and balls. You should show how to modify silicone ice molds to allow them to make clear ice.
My background is ice machines so I can give you a little science in clear ice. Cloudy ice is the result of minerals in ice. Thus if you only use distilled water in a clean freezer you should get clear ice in any ice tray.
Kevin! Place a smalll fishtank pump (4€) at the top of your container and do not insulate bottom part of it. This way the ice will form from bottom to top, pushing all of the impurities to the top and leaving you with a nice and clear block of ice . It's much simpler and cheaper method. It will allow you to create much bigger blocks of ice (depending on the size of your freezer. Cheers! (DM me if you need some details. I've got a lot of experience with clear ice)
logically speaking inverting the process will not change a thing though. you still have the same space, how does it create more? you're adding an extra tool how is it cheaper? etc.
@@CloudianMH you'll obtain significantly more ice because there will be less loss. All of the impurities (mostly air) will be pushed up by ice itself instead of being trapped at the bottom. There is less risk of damaging the tank. Even if you freeze the pump it shouldn't break. It's cheaper because it's more efficient.
I guess I’m just spoiled bc the stores around me sell clear ice ball molds. They work great and saves me from having to carve ice which is a relief for my girlfriend 😅
So I have a very large cooler that I fill with filtered water and leave outside during the winter, usually I try and make a bunch of clear ice and stock my freezer for the summer. It usually only last me till the begining of summer though
Man I have a couple of things that have over expanded....really need to get better at taking it out. Damn having a job and a small child. I'm sure you know that feeling! Hope the family is doing good!
I have a question, I was wondering if making a cocktail we use ice to chill and dilute the drink, work with pre batches would be possible do not use any type of ice and keep everything chill and make a dilution with pure water? I just imagine a crazy bar without ice but making great cocktail using only water and alcohol!!!
You could do that, but you'd need to chill it in a freezer before serving. I made a pre-batched Old Fashioned that way, check it out here: czcams.com/video/E53nH4zPtdw/video.html 🥃 Cheers!
I’m sorry I didn’t read through all the comments to see if this was already asked, but where did you get the large flatter blue cooler? I have a large freezer that I could use that in.
I use the Amazon coolers and take the top off. Question- I saw in another video you were resting (or temping up the ice) on a little plate to bring up the temperature before adding to the cocktail. Is that a plate specific for ice? Or just a plate that you like that happens to fit your ice cube? I love that idea of a plate, so that customers can marvel at the gorgeous cube while I make their drink! Cheers
Wouldn’t using Distilled water take care of impurities as well? Not optimal for everyday ice but for specialty aka cocktail ice I would think it could be worth it.
Even with the purest H2O there's still pressure from water molecules realigning and expanding which will make cloudy ice. Directional freezing and the right timing are key. 🧊
COCKTAIL Kevin 👍👍👍 ... love your videos and your style of presentation ... I am a home mixologist from Slovakia (obviously not Slovenia), I have been mixing cocktails prehaps since 2015 at home, but I have never been so crafty and culinary in the mixolog ... I would like to ask you, how do you get Liber&co syrups in central Europe. Nothing seems to work for me, because I have no liaison overseas. Could you give a hint? Thanks a lot.
Hi! Thank you so much! As for the Liber&Co, they are currently in search of an EU distributor so I hope they will be available soon. Cheers to Slovakia!
Interesting video. I really like your content. But there is one thing that is bothering me: your outfits are well combined, and that tie is ruining everything. Please try four in hand knot, and make it tight to collar.
Its the best way to make ice cubes at home^^ and the clearness is just the cherry on the pie^^ I dont like this icecube forms or plastic bags, and it makes fun to cutt it in your own size^^
Did you ever think homemade Clear Ice was this easy to make?
Get some Liber & Co fig syrup: bit.ly/CTandLiber
Check out our CURIADA collection of bottles here: bit.ly/cocktailtimecollection
If you like what we do, you can also support the channel here:
👕 Merch: my-store-11171765.creator-spring.com
🎩 Patreon: www.patreon.com/cocktailtime
🛒 My Store: kit.co/KevinKos
🌍 Web Page: www.kevinkos.com/
Yes, I started doing my own clear ice with the directional freezing technique. To avoid having „smelly“ ice, I bought a dedicated clear ice freezer. My friends believe I lost my mind at first, until I served them my cocktails with clear ice. Lots of aah and ooh 😅
I use the classic Coleman cooler with the lid removed.
I use double walled insulated coffee cups - takes up very little space and you get clear cylindrical ice.
can you elaborate on that?
@@PlainVidz A simple double walled insulated coffee cup will make fantastic clear ice. I have a video on it.
@@PlainVidzTake any insulated mug fill it up about 2/3 and leave for about 18-24 hours. Top will be frozen ice and bottom will be water. Can be a little fiddly to get out and might need to adjust times but the insulated coffee mugs wihtout a lid on give you that directional freezing as they are double walled on outside usually
@@PlainVidz just as AngryCocktails said, [he has very useful stuff on his channel as well] you a cup that looks like a thermos inside, search up a yeti cup and then you will see what i am talking about [the mark doesn't matter, as long as it's insulated, even a cheap thing will work]
@@PlainVidzif you buy any thermal insulated water cup and fill 2/3 with water, leave it in the freezer with the lid off for 18 hours you have a perfectly clear ice cylinder. (Make sure the cup has no internal lip that will stop the ice from falling out)
KEVIN!!! This is CLEARLY a great video!!! I love making clear ice!!! My wife has threatened bodily harm bcus I take all of the room in the freezer!!!! CHEERS!!!
With this technique, you can take less of her space in the fridge 😄 cheers, my friend!
Try this: make the insulating box open on the bottom, but closed on top, such that you lower it down over the container. This way, you get directional freezing that rises from the bottom rather than descending from the top. Any air bubbles that get pushed out of the ice rise out of the ice, so you don't get bubble inclusions, which can still be a problem with top-down directional freezing.
Thank you for the idea!
This is exactly what I am planning to try with my silicone moulds, leave the bottom uninsulated and the sides and tops insulated to let the gas escape as it freezes.
@@Bluetoothedshark did you get good results?
How did it go?
Wouldn’t the water fall out of the bottom?
I was just thinking of getting a small cooler to make some clear ice, but I can now save that money for more cocktail making 😎
True! Rather spend it on some nice bottle 😄 cheers!
I started out using a low quality freebie travel coffee mug. Only made two big cubes, but fit and worked well in ~24 hrs. Now I use the small square cooler that amazon sells. Now I only have to do it once every few weeks for what I need at home.
Thanks for sharing!
Excellent! This is the exact method I use. I have a freezer with drawers with a maximum height of 14cm. I use a tupperware box which can still be used for its intended pupose when not making ice. With such a small clearance, it is important to judge when to take it out, in order to get useful sizes of ice from it.
And if you live in Canada just leave your cooler with water outside for a day🥶
This video took some time to come out, but I guess it had been put on freeze 🥶😂
Groan
Behbehbeh
Watching this man work is a free art show😂😂😂❤❤❤
I have a few clear ice molds, a couple of small coolers too. I also have some cheap molds that I can position near the top of a cooler and get clear ice roses and little diamonds. Ian obsessed!
You basically have an ice factory at home 😃 Amazing!
CHIP!!! Ive seen your clear ice, AWESOME!!!
Such a spectacular channel - never tried clear ice due to a small freezer. That will change today!
I'm a bit more on the extreme side of clear ice I make glass wear, cubes, other fun stuff with frozen floral and herbs. My blocks are about 20"x 9 x 12 I use a chainsaw and I built my own deep freezer unit that acks just like a clinebell. All my cubes are cut with a meat cutting bandsaw. I use the fusing technique to make my glasses.
Amazing!
Great DYI into making clear ice.
Cheers!
I use a cheap 5 quart cooler with the lid removed. I find 36 hours in my freezer give me the thickness I want. I cut the ice with my oscillating saw, with a blade I only use for ice. To finish off the cubes, I heat up a frying pan and using tongs to hold the cubes I can square them off and polish the sides.
All that for some ice cubes?
@@ericsmith718 Yes.
Thumbs-up for the hard work these guys are putting for these content 👍👍
I started making clear ice using Kevin's build-your-own cooler method. I'm pleased to report that it was exceptionally easy and successful on the first try. Below is an explanation of what I did and may be a useful resource if you're in the US.
I used a 6"x12" plastic container from Target ($3), cut R5 insulation board from Home Depot ($8) to fit around the sides and bottom, then wrapped the whole thing in duct tape (free?). I skipped the inner sleeve because the R5 board has a much higher insulation rating than typical foam and the plastic container slides out of the insulation easily.
When the freezer too full to fit the cooler in, I do this with rectangular margarine container but use 2-3 layers of corrugated cardboard boxes for the insulation.
this is the first time that i understand how to make a clear ice my english is not soo good great video i love it
Cool video! It made me immediately started looking into doing nested cambros with a hole drilled into the top vessel to help separate it from the cloudy ice below. Or a myriad of 2" x 2" x 2" tupperware nestled neatly into a shallow, insulated tray.
I'm using double wall stainless tumbler like this!
Pour water in, put it in the freezer and let it freeze about half way, so you can get the ice out easily.
It produces only one ice chunk at a time, but it is enough for me.😀
I'm with you!!! I use 2 tumblers at a time!!!
Interesting technique! Thank you for sharing!
Fresh ...elegant
Looks so easy! Thanks Kevin - I really can't wait to step up my ice game
Loved the cinematic sequence! 🤣
Me too! 🥂
Oh I LOVE that you did the edited version of making clear ice!!! Upside down!!!!
Thanks!
Thanks for this! And for using Liber Fig, it’s great stuff!
to me, the most annoying part of cloudy ice cubes is that they release the "fridge taste" in the cocktail
not sure if it's a common complaint, though
Tell me about it. That ugly, jucky plastic taste.
Haha, I imagine this experience 😅 not good at all. Cheers!
Clean your freezer, and it won't smell.
The Amazon Coleman cooler has been a great tool to make clear ice at home! ~36 hours for the Coleman if you fill to ~1 inch below the rim.
I love directional freezing. Its what I use all the time.
Bravo Kevin in ekipa odlično kot zmeraj ;)
Najlepša hvala! 😉🥂
Hi! I love home clear ice!!! And I enjoy make it a lot!! My friends say i'm crazy about it, they don't understand what is really important in life! Jajaja.
Cheers from Argentina!
Haha, I understand you fully! Cheers from Slovenia! 🥂
Good job Kevin and team!!!
Thank you!
Wow! So THAT’S how it’s done. Did not know that. I’m never going to make clear ice.
I bought a small Wintersmiths clear ice cube freezer that makes 3 large ice balls (2.5" dia) and 3 small balls 1" or slightly smaller. Hard to get it to work perfectly, but it is cool to have a large ball in an old fashion or a negroni. I want to experiment with buying some silicone ice cube trays and modifying them to try and freeze in a similar way to your approach. Carving doesn't really appeal to me, but you can make some beautiful pieces of ice that make your cocktails works of art. Thanks for the demonstration!!
Thank you! Easy to understand and duplicate. Kudos!
I use an even smaller container: a straight-sided water bottle cut in half, with two beer koozies as insulation. It only produces one ice cylinder though.
I also like to save the scraps for crushed ice with a Lewis bag. I use that lunchbox cooler from Amazon with reverse osmosis water. Great technique!
Awesome and very helpful video, thank you guys!
Cheers!
A cocktail video with Lakmé's Flower Duet playing in the background... what an ending for the week.
What a brilliant episode! Thank you very much for it.
I bought the Amazon container, luckily it fits into my freezer. The only downside is that shaping the ice is not easy with kitchen tools, so either I need to get proper tools for it, or some molds which would give me correct size blocks from the get-go.
Best episode !
Can’t wait for a ‘Super Ice’ video
Nothing like going through all this work to end up pouring warm liquid onto a cube straight out of the freezer-the ice will immediately crack and ruin the presentation. To avoid this, take out the ice and let it sit before using. Another option is to user a mixer with different ice to chill your drink first before pouring.
you are a genius!
My heart literally stopped when you pushed that block of clear ice off the table LOL!
😄😄
Absolutely great quality video as always. I am wondering if you be willing to make a video about your take on home made liqueur! Cheers🎉
Already planning on doing something in this direction 😉🥂 Thank you!
After seeing the new generation get angry at ice like this is kinda fun. Love the videos
Thank you!
Perfect I use the same method.
I am using plastic container wrapped out with aluminium foil - it takes up less space in the freezer and isolate almost as good as styrofoam.
Interesting! I have to try this out! Maybe it's time for an improvement and Vol2 of this episode 😉 Cheers!
Never thought if insulating my own containers. I have a tiny freezer and even the smallest coolers are too big
With this, you can also make clear ice at home 😉 Cheers!
This is so much work
I've been making my own ice with the red version of the cooler from Amazon. I'm going to experiment with using molds inside the cooler to see if I can make ice for my collins glasses easier.
When you pushed that big block of ice off screen.
As Dash from the incredibles once said.
"Awe, I like it when it shatters."
Now to repurpose my girlfriends yoga mat while she's at work.
Hahaha. Good luck!
Hahaha, I hope she didn't find out yet.
Best place for a yoga mat 😂.
A great tool for sawing ice but still in a compact, easy-to-store form factor is a foldable pruning saw. Works great due to the double set of deep serrated blades, and definitely cheaper than the 'ice saws' that seem to cost a fortune.
Great idea, thanks!
I’ve used double walled stainless steel mugs with good results, come out like hockey pucks
When I was a kid, my dad build an electric saw for styrofoam. He never patented it. I wish he was still alive today to see your video, he would have seen a possible use for his saw.
I wish that too! Sorry to hear he passed away. Cheers to your amazing dad!
For big ice cubes I use a small cooler but for clear ice spheres I've made my own cooler. I've bought a silicon ice ball mold, drilled a hole in the bottom of each sphere, made a styrofoam box and cut it that the ice mold "sinks" in the middle and since I didn't want my balls xD to have contact with the styrofoam I coated the box (on the inside) with food-grade silicone (labeled as clean room-grade or something like that). It looks junky, probably I've could bought an clear ice ball maker cheaper but... :P
I use a simple plastic food takeaway container, freeze up a big block of ice and cut away the parts with the bubbles.
The ones with bubbles double up as ice for shaking or just ice for soft drinks
Granted, nothing beats clear ice from dedicated setup, thanks for the idea =)
Insulation and the right timing are key. But it's all about enjoying a good cocktail in the end, right? Cheers!
I use the 25$ cooler you mentioned for my clear ice. Only difference is I let the whole block freeze completely. The cloudy portion I use for crushing in a Lewis bag since.
Nice! Great use of that cloudy ice! Cheers!
You’re right. Once you make clear ice, you can’t go back. You also become a critic of bars’ ice. “Nice drink, but the ice sucks.”
I make clear cubes, Collins spears, chunks and balls.
You should show how to modify silicone ice molds to allow them to make clear ice.
Great idea! Thank you!
Not video related really but cool, classy, timeless style bro. Not a big drinker but the clear ice def looks better.
Thanks!
My background is ice machines so I can give you a little science in clear ice. Cloudy ice is the result of minerals in ice. Thus if you only use distilled water in a clean freezer you should get clear ice in any ice tray.
I use a travel mug for single serving clear ice. Smallest option for domestic use.
Kevin! Place a smalll fishtank pump (4€) at the top of your container and do not insulate bottom part of it. This way the ice will form from bottom to top, pushing all of the impurities to the top and leaving you with a nice and clear block of ice . It's much simpler and cheaper method. It will allow you to create much bigger blocks of ice (depending on the size of your freezer. Cheers! (DM me if you need some details. I've got a lot of experience with clear ice)
logically speaking inverting the process will not change a thing though. you still have the same space, how does it create more? you're adding an extra tool how is it cheaper? etc.
@@CloudianMH you'll obtain significantly more ice because there will be less loss. All of the impurities (mostly air) will be pushed up by ice itself instead of being trapped at the bottom. There is less risk of damaging the tank. Even if you freeze the pump it shouldn't break. It's cheaper because it's more efficient.
This is essentially the clinebell machine method
Nice.
Thanks!
I guess I’m just spoiled bc the stores around me sell clear ice ball molds. They work great and saves me from having to carve ice which is a relief for my girlfriend 😅
As long it works great, that's it! And having a happy girlfriend is the most important thing so stick with molds 😄🥂
Also I'm lucky enough to have a big freezer...but I didn't think to make my own cooler. Big Brain move right there
🤯 you didn't need to think of that since you have enough space already. We had to during the lockdown when we started Cocktail Time and it saved us!
@@KevinKos necessity breeds creativity
FIRST?!?!?!?!?----------->Maybe....
I almost beat you 😅!
@@ellyam991 ELLYAM!!!! Hows it going!!!
Only beaten by the Phanthom hand 😄🥂
@@KevinKos One can NOT ignore the phantom hand!!!
So I have a very large cooler that I fill with filtered water and leave outside during the winter, usually I try and make a bunch of clear ice and stock my freezer for the summer. It usually only last me till the begining of summer though
Haha, I know the feeling. Clear ice goes so fast! 😄 cheers!
Man I have a couple of things that have over expanded....really need to get better at taking it out. Damn having a job and a small child. I'm sure you know that feeling! Hope the family is doing good!
Yes, I exactly know that feeling 😁 They are great! Thank you! Hope your family is doing great too. Cheers!
I have a question, I was wondering if making a cocktail we use ice to chill and dilute the drink, work with pre batches would be possible do not use any type of ice and keep everything chill and make a dilution with pure water? I just imagine a crazy bar without ice but making great cocktail using only water and alcohol!!!
You could do that, but you'd need to chill it in a freezer before serving. I made a pre-batched Old Fashioned that way, check it out here: czcams.com/video/E53nH4zPtdw/video.html 🥃 Cheers!
I’m sorry I didn’t read through all the comments to see if this was already asked, but where did you get the large flatter blue cooler? I have a large freezer that I could use that in.
Hi! There should be a link in the description. Thanks!
I buy “Chicago Classic Cube” at the grocery store for about $3 for a 7lb bag. Much easier.
Also, many people just let the water down the sink while you can just... Use it!
Is it safe to just buy a styroporbox and fill it with water? if not, could you put plastic wrap into it or any other idea someone?
Any links for the gloves you used for handling the ice?
Just the work/safety gloves from the hardware shop. Mine was a bit too big for my hands though 😅 Cheers!
I use the Amazon coolers and take the top off.
Question- I saw in another video you were resting (or temping up the ice) on a little plate to bring up the temperature before adding to the cocktail. Is that a plate specific for ice? Or just a plate that you like that happens to fit your ice cube?
I love that idea of a plate, so that customers can marvel at the gorgeous cube while I make their drink!
Cheers
Can multiple layers of bubble wrap be used instead of styrofoam for insulation?
Yeah, I think that should work as well! One way to find out, and please report back with your findings! 😎
Does the temperature of the freezer make any difference?
Mostly just for the ideal time for the freezing. Test different times for the first few tries and see what works best.
Wouldn’t using Distilled water take care of impurities as well? Not optimal for everyday ice but for specialty aka cocktail ice I would think it could be worth it.
Even with the purest H2O there's still pressure from water molecules realigning and expanding which will make cloudy ice. Directional freezing and the right timing are key. 🧊
@@KevinKos that makes sense, cause I imagine you would still get air entrapment without directional freezing.
COCKTAIL Kevin 👍👍👍 ... love your videos and your style of presentation ... I am a home mixologist from Slovakia (obviously not Slovenia), I have been mixing cocktails prehaps since 2015 at home, but I have never been so crafty and culinary in the mixolog ... I would like to ask you, how do you get Liber&co syrups in central Europe. Nothing seems to work for me, because I have no liaison overseas. Could you give a hint? Thanks a lot.
Hi! Thank you so much! As for the Liber&Co, they are currently in search of an EU distributor so I hope they will be available soon. Cheers to Slovakia!
Bardzo fajnie ale chyba jestem zbyt leniwy
Kev coming through for the mandem once again
Pls wear some safety glasses while hammering the ice.
Better to be safe, then to be sorry later.
Interesting video. I really like your content. But there is one thing that is bothering me: your outfits are well combined, and that tie is ruining everything. Please try four in hand knot, and make it tight to collar.
25 buck? You got ripped off.
😅 looks like it
Its the best way to make ice cubes at home^^ and the clearness is just the cherry on the pie^^
I dont like this icecube forms or plastic bags, and it makes fun to cutt it in your own size^^
The best ice is now. Chilling stones or orbs are better.
Good stuff, thanks for this one. Will def try at home😉🧊🧊
Cheers 😉