Nissan Altima 2.5: P0014, P0300 & Running Rough?
Vložit
- čas přidán 27. 12. 2020
- This is a very common issue on these Nissan 2.5. Although it can be mechanical engine timing, cam phasers etc. The majority of the time it is a simple solenoid. It would be my suggestion to swap out all three (intake, lock and exhaust) solenoids but the choice is yours. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained. - Auta a dopravní prostředky
No jeep hat, no jiggly bits, no brake clean, and no classic reach-arounds? This is an IMPOSTER!! LOL
You got Ugga duggas. And bofa dees nuts. I mean it sounds like Eric.
I was thinking the SAME thing!!!!
...just a blank hat.
But we did at least get a Boffa deez nuts lol
Uhhh... I was just about to agree with you... then the air compressor kicked in - nup... that’s an original EricO vid!
Hope you and your family had a great Christmas. Love watching you diagnosed and repair problems. Thanks for sharing....
Eric I have been watching your videos for the past 5 years before I even had a car. Now I have my own car and have the knowledge to confidently do repairs myself. From diagnosing a small EVAP leak from the gas cap to replacing brake pads / rotors and control arm bushings thanks to your videos. Keep it up man!
Best thing about December so far? SMA videos. Thanks for that. ^.^
Your knowledge never ceases to amaze me
Thanks for making another great video. I never can understand the dislikes? What could someone not like about his videos? There funny, Educational, no crappy music. Just great videos & camera work. That's why a 1/2 million subscribed & counting. BTW no phone or compressor running today? LOL
making something difficult look easy is the sign of a true pro. My new favorite quote and philosophy going forward, "if you've done it right and you're left with extra parts, just throw em' away".
My daughters Sonata just had the P0014, and I just replaced that, I have been watching you for a while now, and have learned a lot of trouble shooting, thanks!
I can learn more from this channel in 10 minutes, than I can from Scotty' s in 10 hours .
Great job SIR
Scotty just pushing merchandise anymore. Hate to guess what he's worth.
Scotty loser...and all his followers
I HAVE A BLOW UP WAVEY 20 FOOT AT THE SHOP(WE NAMED IT SCOTTY)
Great video! Keep up the fantastic work. Towing video with your brother is still my favorite.
Hope to see an MR2 come into the shop in the future!
Thank you for the video, Eric!
I enjoy the sounds of your Shop, the banter with your employee.
Eric your vids keep getting better and better, following you since you had about 30k subs, now on your path to 1 Mil.! Amazing work, so much wisdom shared. Thank you brother, this channel is priceless!. Happy New 2021 and blessings to you and your love ones.
In my opinion dude you're going about it the right way and funnily enough it's the same way I've done that job in the past keep up the excellent work thanks for taking the time to make a video, I know you're really busy and these take time. So if nobody else says it I know I have thank you 😁
My favourite car diagnostic channels are this one and Diagnose Dan.
Very different in style, but both excellent.
That auto focus started messing with me when the motor mount was coming out...thought I was having a stroke or something.
Love me sum SMA videos
Happy New Year!
Really enjoy you guys, I am getting ready to rebuild a 1991 Pathfinder my daughter bought new when she was 16. Now she wants it back new. She put 350,000 mi. on it so needs a rebuild. Keep up the good work, thanks again. KR
Eric, I just wanted to take a minute and wish you and your family and everyone at s.m.a. a merry christmas and a happy , prosperous, and covid free new year. Been watching your channel now for about 4 or 5 years now , and you , Ivan , and Cuba's channel are the best. Stay covid safe.
Outstanding DIY video, thanks for taking the time and sharing it I was able to follow you step by step and it was dead on the money car runs like a champ.
i hope you and family have a wonderful new year,keep these vid's comeing love them
Merry Christmas to the Eric O family!!! Enjoy all your content. Seem to be doing more common issues lately that's easier for a novice like me to understand.
That's a lot of work if you don't know what to do. Great video for someone to follow if they don't have a good mechanic to take it to. Well done.
Great video Eric! When it cones to electronics, sensors and the like, OEM is the way to go.
New Sub. Watched hundreds of hours. Love them all. Your cheap. Ice cream money?? cookies?? When my guy works my truck the shop gets broasted chicken dinners and pizza. Thanks for the intro to Pine Hollow. All the brakes I have watched, no two have been the same. Never boring, always fun and informative. Dang, you make me believe "I could do it."
Nice to see more Nissan content, my wife has a '17 Rogue with the big 2.5 and I have a '19 Infiniti QX60.
That 2.5 motor mount is HUGE.
So, you're telling us your wife went rogue? Sorry to hear that. :)
Did anyone else have a 1 hour 55 minute Ad on here. WTH!!!! Glad to see you back.on Eric.
Eric Happy New Year to you and your family! Thank You for everything!
Only complaint about this vid. not enough SMA vids lately. I get it work/customers comes first then you tube. But I do miss Mr O knowledge and expertise when it comes to working on cars.
Once again excellent video. Tks for explaining into detail the repair and for the tricks as well. Happy new year Mr O and family. 👍👍
Thanks for another years worth of info & videos. Hope you and family had a great Christmas, be safe. Regards from Galway, Ireland ;)
Dr O, a new vid from you is a holiday treat. Hope you had a great Christmas and have a Happy New Year.
This was perfect and I was able to resolve my issue today. Took me 2 hours start to finish and took my time to keep track of all of the fasteners.
True story , I'm doing it as it we speak...it's like he was in the room instructing, you can tell they have good shop comrodary.
Thanks, Eric, for sharing another video with us. Belated Merry Christmas, and Happy New Year to you and yours.
Eric, awesome thanks for all the info you share happy new year and far away from any sickness. cheeers
Well look who has returned lol the prodigal son indeed. Welcome back Eric O and I hope you had a very blessed Christmas with your family.
Welcome back. Hope your New Year is safe, happy and prosperous. Always enjoy your videos.
Thanks for another video! I watch so many channels but look forward to yours the most! Happy holidays and happy new year to you and family! 👍
Hope you had a good Christmas and have a good new year thanks for the videos through the years
Eric.
really enjoy your troubleshooting techniques. you are awesome, great job man., keep up the good work. god bless you and Ms.O
Great vid! Just wrapped up the job on my girls car thanks to this and you just saved us soooo much!
Eric...Merry Christmas 🎋🌃 for your family and you.
Due respect for your
What u have done for
Viewers and customers
Worldwide.
I keep watching your
Job from overseas.
Hope you had a blessed time with your family thanks for the new video was kinda going into withdrawels lol
Liked. Great video as always 👌.
My car also required replacement of both intake and exhaust solenoids, it is much easier that this though, right under the beauty cover.
I finally got some nickel plated T pins for troubleshooting and what a difference, thank you for the idea.
Merry Christmas mate, thanks from Australia for everything you give us through the year!
Need to hear "heres your problem lady" good video Mr. O.
Thanks for sharing Eric. You and family Happy New Year 😊🇺🇸
Got a SMA coffee mug & tshirt for Xmas. Thanks for another great Video.
Great video as always Dr. O., I saw an Elf run by at one point early on. Hopefully, Scotty Kilmer will watch your videos and learn how to do a great video without sounding like he is a pitchman for Flex Seal. Keep it up, wishing you and your family a great 2021.
Eric,
Great video and fix - thank you.
Merry, Happy, God bless
Paul (in MA)
I like to start my day with SMA. Thanks.
Merry Christmas (belated) and a Happy New Year to you and Mrs O!! Love your vids, and learn a lot.
Great info thanks for sharing Eric! Happy New Year team SMA!
‘Bout time you put out a ‘classic 2.5’ video. Been waitin’ awhile.
Can’t wait on the “classic 1.3 Suzuki” vid! 🤣🤣🤣
First off Happy New Year! Need to make sure I remember to stop and get someone...will need a scape goat, excellent. Yep, my wife (without my knowledge) bought a 2015 model of this car. It's for our teen daughter. Already had to do some AC work on it. Nice to know we've got this to look forward to. Thanks for the vid.
Nice vid, you alerted me to the fact there was more than one, which Alldata and Identifix did not, but I just lifted the vehicle up on a lift, removed the right front tire, remove the piece of plastic out of the way, and you can get to all 3 with no issues.
Nicely done sir. Thanks Dr. O!
liking the vid even before watching, keep up the work !
Hope you have had a happy holidays! Also, we'd love to see you do some work on your own vehicles!
Thank you for sharing Eric O. !
Good video it really made the process of changing the parts very clear.
I trust you and your family had a fantastic Christmas. I hope 2021 brings you many blessings.
A big DITTO on that good buddy!
Great as always!
Always enjoy your posts - thanks for doing it!
Glad you enjoy it!
First!!! Hope you had a wonderful Christmas, Eric!!!
16 min and 3.2k views. Hats off to you Eric. With the directors clapboard the videos are better👍
Love me some SMA! Thanks Mr.O
Great job Eric wish more mechanic would do the same kind of work
Thanks for the help brotha, watched this and was able to fix mine.
Thank you Eric for the video. My grandson has the same engine in an Altima and the procedure for their replacement will be invaluable if the time comes. Hope you have a happy new year.
Seriously, just change the oil as recommended, they last 250k and on.
Glad I could help
Hope you guys had a wonderful Christmas and I hope your New year's just as nice
Happy holidays and thank you for the upload Eric!
I know you are a very practical man and don't care much about stuff like this, but I love the snazzy orange gloves! Been looking for them forever now, but they are always unavaliable or don't deliver to my country ... That or they cost 30 euros per box, compared to 9 eur from other brands/colours. Bah, hope they're as good as they look! 😊
I think this is the most I've seen you use hand tools. Great video as always.
Nice job Eric, man I hate working in those tight places.
Thank you my friend good job always learn from your quality videos
Haven't watched it yet but I already no it's gonna b good lol keep up the good vids I've learned allot from ya
Thanks for the video my man! Appreciate it. Mine is insane, literally decides day-to-day how it will run....
Thank you Dr. O! Another Nissan "thing". Wishing you and the fam Merry Christmas and Happy New Year!
Thank you too!
There you go fella Happy New Year to you and your family.
happy new year eric really enjoy your videos keep safe .
In a somewhat recent video I saw you using what appeared to be the Autel MK908 scan tool. We are looking for a few scan tools for our small shop and were wondering what you thought of this tool. Anyway, I will wait for your response off the air. LOL and keep the great videos coming please. We all enjoy them very much.
Thank you for another great video. Stay safe out there. Cheers
Eric O notification boom I'm in.
Where have you been man?! Fall semester is over, im looking forward to more videos whoo!!
Man I love working on cars as a hobby but NOT as a job. With that said I would love the opportunity to work for Eric O. The wealth of knowledge and fun.
merry christmas happy new year, thk for the video
His videos are like asmr videos they are so relaxing
Good job Eric. Happy New Year.
I was too happy to see this notification
Damn that is a slick shortcut for pulling those solonoids, otherwise that Job will take a lot longer kudos.
thanks so much for this video, it helped me tremendously!!
Eric makes it look so easy...I know, I used to have a job at Ford design. I was the guy who had to add sharp edges onto everything under the hood.
You can thank me for all those mangled knuckles. It was just a job, I'm not proud of what I did.
When I got promoted, they put me in charge of ensuring, that you couldn't just fix something.
2 hours of disassembly, to do a 10 minute fix. Again, It was just a job, I'm not proud of what I did.
Now I work for a Chinese firm. I make sure, at least half of what we ship is broken or has pieces missing or is the wrong part.
Again, It is just a job, I'm not proud of what I do.
"Get them from Nissan". I love the way you made mention of that as opposed to saying "get them from Dorman" which no one in their right mind that doesn't want to waist lots of time chasing their tail would do.
Appreciate the video and the comments. Replaced the 3 as suggested and problem appears to be fixed.
Merry🌲Christmas to you and yours 🎅🏼🤶🏼
Glad you used the Nissan actuators.. I've seen aftermarket from multiple brands that either don't work, or fail very quickly
When I read your post it made me realize I installed a cheap one on my sis's 04 altima. It runs like it has a dead cyl. I'm looking for a quality one now.
Eric, Merry Christmas bud. You and all you family. 🎅
Whats the difference between a mechanic and a good mechanic?
A mechanic has leftover parts but a good mechanic doesn't need them.
Or something along those lines.
Great video Eric
Thanks for another video, buddy!
Sweet video. What you do in an hour would take me all day.
Thanks you sure saved the Christmas boredom.