recursive displace in Touchdesigner
Vložit
- čas přidán 16. 06. 2020
- Here's a quick codeless method for doing different sorts of fluids simulations based on recursive displace. In this one, I also cover some other good tricks for rendering out height maps with no pbr material or geometry.
'The secret life of chaos' is the movie where you will find the best explanation of what feedback means: www.dailymotion.com/video/xv1j0n
Subscribe to this channel to get notified when I release new videos!
You can support me on Patreon
/ paketa12
or follow me on:
/ paketa12
/ paketa12
This brilliant guy here is my twin brother. I don't speak TD language, therefore I don't understand a shit of what he's saying, though... I really love the colours! But reading these comments make me so proud that I even watched it all! You rock, bro! ❤
I love you sis!
I love every time Paketa says "it's ugly" 😎
So cool, thanks. Gotta love feedback loops!
feedback is one of the craziest things to play with. Thank you massive Bileam, I'm glad you like it.
@@paketa12 Absolutely! So much fun to experiment with :)
I like your explaining style, you relate the technical actions to intuitive interpretations of the output quite well!
thank you massive. I'm delighted you like it
Awesome tutorial and big thanks for the link to "The secret life of chaos" 🤟🏼
This is going to launch such a trend in my Instagram feed ^^ thanks a lot for another great lot of techniques
Legend!! One of the big names in TD community.
Another gem from paketa12. I found some interesting effects with a low strength in the slope - looked like a microscopic view with just some parts in focus.
the low harmonic spread/gain for the noise will increase the slip. You can go with the points position into the second input but set the offset to 0 - I was a bit clumsy at that moment and I leave it like both inputs for the slope; but as I said there's no rule, is a feedback in which you make your own . Thank you Brian for your support.
This was wonderful dear Aurelian! Very inspiring and beautiful, thank you.
Thanks Paketa! I don't even use TD, but your tutorials offer a ton of creative inspiration :)
Thanks so much for this and all of your tutorials. They are great. Love your hats
Brilliant. Thanks for another great tutorial. Very insightful.
We love Paketa12!
Well done! awesome technique.
Really thanks for this !!!! always the fan of your tutorial
Brilliant tutorial. Thank you!!
You are the pinche Kinga, love it!
so powerful and so cool, thanks Paketa!
Thank you so much
rock and roll paketa the king
Thank you! Great tutorial
Una Bomba! Thank you so much for sharing!
BEAUTIFUL 🥰 also, I had to pause the video cause I kept thinking my cat was meowing at the door to come in, but it was in your video
looks amazing
Paketa you are a genius!!!
I'm really not ...I'm just playing with it as a child would do it. Thank you so much
You rocks! Thanks and respect!
Thank you so much for the tutorial ! I'm having a little issue with the Slope TOP at the moment. When I connect it to the colored noise it just messes up everything, even though I followed everything you did in this video
Great tutorial!
Thank you so much for doing this means so much :*
big respect!
nice. i put it in a pbr render system and looks like an ocean. thx!
thank you man, I'll Patreon soon!
thank you so much
looks really neat, no line of codes! Maybe next tutorial should be generative patterns using Turing morphogenesis equations ;)
I have to go deeply into those equations and I might give it a try. As I remember there's no 'for loop' and so I believe it can be done in tops. Thank you so much
so cool! thanks!!!
Very very very cool !
gracias maestro!
Hi, I was unable to find the UV tool, could you maybe link me up to the video/project you might have attached it to?
P.S. Thanks for all the great work!
Hi Paketa! Thanks for this! Im stuck in the minute 11:00 too, I saw your Voronoi tutorial but I dont know how to bring it as a Component and see it in the palette.
also have the same problem
same here
Same here
I too am stuck at the UV, I even brought in the same UV comp from the voronoi tutorial and it doesn't work in the same way.. hmmm..
Guys the UV used in this tutorial can be found in the TOP displace one. It´s not the one used in Voronoi Tricks.
Such a legend!
Update: Link to the tutorial where you go over your UV component?
There's a great breakdown on the Voronoi tutorial. czcams.com/video/54amDdU0eus/video.html
@@blankensmithing but it's not the same one !
@John S If you're a Patreon subscriber, its contained in the new tutorial file/video that was uploaded today (displace TOP)
Thank you now to experiment
Oh. You shaved your beard. Is it too hot in the summer? Nice mustache!
I liked the movie about Chaos a lot. Thanks for it.
It's very cool that you've used the great scientific base to make this kind of pseudochaos.
I'm delighted you like the movie. Yeah the beard goes off from time to time ...like 0-1 ramp so I'm back to 0.0625 with it :)) Thank you so much
Amazing video, thanks for this! Can I ask, how do you get your container to fill the right hand side window with the video output when you drag and drop it into the bar at the top? I've been trying to do it for ages but it just takes me into the container's child network
Figured it out haha, in case anyone else is wondering; right click in the network editor, go to Display and turn off backdrop TOPs. Then turn on the blue display button for the TOP, click Split Left/Right in the top right Pane Options dropdown and in the Pane Type dropdown (top left of the pane) select TOP viewer (or just Alt + 4)
thanks!!!!
Thanks for sharing. Starting right about at 10:15 you've made a change and I can't seem to match the look of the noise exactly. I'm guessing the change was Feedback >Common> Fill Viewer > Native Resolution. Could you confirm? Looked on your Patreon but didn't see the tutorial.
hi Jim, how you doing!? The change I did was due to a little clumsiness when connecting the displace top - I switched the wires. The noise for the displace inside the loop is almost default and the displaced weight is set to 0.001. First input into the displace should be the b&w texture we have in the loop and the second one it takes the displace - by doing the other way you get different resolution inside the feedback if you're noise top has a different one. I'll have the file for download soon, also the UV and Normals components. Thank you so much for your support.
So good thanks for this! Were you planning on adding the source file to your patreon?
yes Eric ...as soon as I finish arranging clean and adding adjacent explanations in it will be available for download. Thank you so much for support.
@@paketa12 Hi! Any progress on a clean download? I never quite made it past the insertion of the UV.
Master!
Great tutorial!! When I'm adding the UV with the feedback after I mask out the R and G to combine the data into the blue channel it just looks like the UV. When I preview as points the plane isn't being displaced either. Any ideas on how to make sure the feedback is getting passed through to the blue channel? I made sure to set the input noise function to the feedback as 32-bit float (Mono + Alpha) like you did.
make sure your texture is rgb. It seems like you only have rg and so the add on blue channel doesn't count
@@paketa12 That fixed it! thanks! In your tutorial on making the UV the last step was to set the color channel to RG. I ended up adding another reorder to the end and set the color mode to RGB
I've gotten stuck here too. Think I brought over the UV from the 'Voronoi tricks' toe OK. But at the point where we 'add' the select and UV together, I don't get the coloured noise cloud. Will try and work backwards to where the color channels need to be set differently, as I'm not sure where in the chain that needs to happen. ie. Which texture.
@@JimRMorrison That's exactly what I was running into. Put down a 'reorder' TOP after the UV and in the Common tab set the Pixel Format to 32-bit float (RBG) and then send it to the Add. That should fix it. You don't necessarily need to use the reorder TOP. you can use any TOP that will let you modify the pixel format.
@@blankensmithing THANK YOU! Sorry for shouting, but i genuinely mean it!
really nice video, thank u! where can i find the tutorial where you describe how to make your UV component?
It's covered in the Voronoi tutorial czcams.com/video/54amDdU0eus/video.html and you can download a working version in the .toe file on the patreon link for that tutorial.
thank you so much for helping me out here. I'll have it as a component on Derivative site for download later today.
@@paketa12 Am I correct in seeing that the internals of the UV component differ between the component you've used here and the one in the downloadable? (eg. math)
@@JimRMorrison Totally agree , it's not the same one !
@@menchaouioussama9660 did you find it in the end ?
YESSSS!!!!
cool
hello paketa, I can't find the discord server on patreon :/
For the mac users, the Level TOP is not working on macOS. Opacity turns everything black, but funny enough following this tutorial on a PC, I was able to do it properly.
Hi Paketa, I get stuck at around 11mins 30........When I put the select and UV into the add then mask the R and G- it looks just like the UV tool, nothing has happened?
💥💥💥
ur nutz bro
thank you massive :)
@paketa12 it would be absolutely lovely to replicate the morphogenesis texture in min. 7:00 of the documentary. Can it be done? Thank you, very deep knowledge here man, thanks.
Hello Paketa!
I cant find the UV1 File, so i cant continue ur tutorial, could you please help me where can i get it? Thank you!
even if this one is an exception, most of my tuts are accompanied by the source (link in the description) file and you can find the UV component in most of them. For example in the last 'line transfer' tutorial ...thank you so much.
This might sound off topic but what paketa12 means? It sounds really cool I am just curious :)
I think it’s a refference to russian raketa watches, where the letter “p” is read as “r”.
I saw it 20 years ago on an old sticker on my fridge ...I loved the phonetics. It means indeed rocket in Russian I believe :)
@@paketa12 Thank you really much for your answer! :D
@@Styngloko It could also be a soviet vacuum cleaner. =) a.d-cd.net/b517585s-960.jpg
Where can I get that UV component from?
www.patreon.com/posts/voronoi-tricks-34651072 He goes over it in this tutorial and it's available in the downloadable .toe
did they take away the option to go into the null (when you click collapse selected) I cant see to find how to get past this initial part lol
I would like to levar-nos but think I am not able for it...
Nice! 🍌🍌🍌 Haven't seen Slope TOP in action before
I used it years ago without understanding exactly what it represents ... a short time later I put it aside since I was desperate for its color and lost the 'fungus' from my reactions ever since. Little time ago during the Roundtable X stream, Greg said something about it and I went back on it. It stays for good now :) Thank you Stas