How To Fix a Vintage Conn Saxophone Tunable Neck
Vložit
- čas přidán 10. 09. 2024
- This is a how-to video about fixing the neck on a Conn "Tunable Neck" when it gets stuck.
Here is the link to the playlist "How To Repair a Saxophone"
• How To Repair A Saxophone
Here is the link to the playlist "Unusual and Interesting Instruments"
• Unusual and Interestin...
Do you want to leave a tip so Art can continue to make more quality videos?
TIP JAR - paypal.me/bras...
Fascinating! That must have made it much easier to tune, at the expense of keeping it clean.
The MacGyver of instrument repair. Very fascinating....
tremendous work I learned something new
Great video.
If any of y’all are interested, I would very much recommend checking out Matt Stohrer (of Stohrer Music) here on CZcams, if this kinda stuff interests you. He’s a saxophone repairman that specializes in vintage saxophones. Very interesting and informative!
The vice trick was super cool! Thanks!
Wow. Never seen that before. So complicated.
Thank you great video .Where might I find a set crew for a 6m micro tuner ?
Thanks,what chemical did you use?
I used phosphoric acid. Here is a link to a video I did about my chemicals.
"Tour of My Instrument Cleaning Room: Intro To Chemicals"
czcams.com/video/wBaILXIfERI/video.html
How you comment that 😆 without sound is better !
I have Liiman backhome just thinking to change to Tenor neck but some vdo advice they are same path
Hi great vid!
On my sax the pin key that pushes the crook key ring is bent and I’m afraid that if I force it it’ll snap any tips ❓
You need to be careful to rotate the bend around the point where it needs to bend. If you do it the right way, there is a small chance it will break. If you bend it in an uncontrolled way, there is a lot more chance that it will break. It is very hard to explain the technique in words. I have not yet done a video on this yet, but I will try to publish one in the near future.
You have to decide if you want to risk it. You may be better off taking it to a repair shop.
Ok thank you 😊
A weirdly overdesigned system. It's no mystery why nobody else adopted it. Besides having to mess around with the tiny screws and the spanner rings, the outboard end of the moving part is very thin and easily damaged. Particularly on C-mels (which basically have people mystified so that they try to do awful things like cram alto mouthpieces on), that end can take a beating.
I wish I had some long screwdriver inserts like that.
teacher, forgive me for giving you my opinion, I would remove the octaba key and I would work better thanks
You are correct. I should have removed the octave key first.
@@TheBrassandWoodwindShop l thank
@@javierquesada798 Good tip to remove the octave key!