Video není dostupné.
Omlouváme se.
How To Install: Mishimoto Nissan 370Z Infiniti G37 (Coupe only) Oil Cooler Kit
Vložit
- čas přidán 15. 08. 2024
- Product page: mishimo.to/1Vy7EjF
Facebook: / gomishimoto
Twitter: / mishimoto
Instagram: / mishimoto
Mishimoto proudly announces the all-new Nissan 370Z, 2009-2020 / Infiniti G37, 2008-2015 (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto oil cooler is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Nissan 370Z/Infiniti G37 Oil Cooler Kit comes with a Lifetime Warranty, so you know quality is guaranteed!
Model Number: MMOC-370Z-09
Mishimoto 370Z Oil Cooler Kit Installation Instructions
PARTS LIST
3PC | Application Specific Mounting Brackets
1PC | 19 Row Oil Cooler
1PC | 4ft Stainless Steel Braided Hose w/-10AN Fittings
1PC | 5ft Stainless Steel Braided Hose w/-10AN Fittings
1PC | Oil Sandwich Plate M20, Silver
1PC | Stainless Steel Sandwich Plate Adapter, M20
2PC | Banjo Fitting w/ Bolt M20 x -10AN, Black
1PC | Mounting Hardware Set
TOOLS NEEDED
Jack & Jack Stands
Socket Wrench
Socket Extensions
Screwdriver
27mm Socket
10mm Socket and/or Wrench
Panel Tool
Teflon Tape
5mm Hex Key
Oil
Disclaimer
• Please dispose of any liquids properly.
• Allow vehicle to cool completely prior to attempting installation.
• Mishimoto Performance is not responsible for any vehicle damage
or personal injury due to installation errors, misuse, or removal of
MP products.
• MP always suggests that a trained professional install all MP products.
• Do not run the engine or drive the vehicle while overheating. Serious
damage may occur.
• Raise vehicle only on jack stands or on a vehicle lift.
• See specific instructions regarding sandwich plate installation on last page.
Note: Oil cooler systems must be checked for leaks during each
oil change.
INSTALLATION INSTRUCTIONS
01 | Preparing the vehicle for installation
1. Raise vehicle and support on jack stands.
2. Remove plastic clips and 10mm screws. Remove splash shield.
3. Remove bumper clips (pop clips).
4. Remove 10mm bolt from inner splash shield panel (both sides).
5. Remove front bumper.
02 | Preparing the Mishimoto oil cooler
kit for installation
1. Wrap plug in Teflon tape and insert into sandwich plate.
2. Install O-ring seal on sandwich plate.
3. Assemble and install banjo fittings to sandwich plate. Be sure that a
seal is on the top and bottom of the fitting.
4. Locate appropriate adaptor (no hash marks).
5. Remove oil filter and install sandwich plate to oil filter housing.
Next, install appropriate adaptor in center of the sandwich plate.
Tighten the adaptor in hold sandwich plate in place (27mm socket).
Lastly, tighten the banjo fittings using the same 27mm socket.
6. Attach Mishimoto lower bracket to oil cooler using 10mm bolts.
7. Attach Mishimoto upper bracket to oil cooler using 10mm bolts.
Leave loose until installation is complete.
8. Install threaded lines to oil cooler. Leave loose until installation is
complete.
03 | Installing Mishimoto oil cooler
1. Install threaded clips on vehicle.
2. Install oil cooler and bolt in brackets using the 10mm bolts.
Then, tighten upper bracket hardware and threaded lines.
3. Stainless oil lines will follow P/S lines over metal support beam.
4. Connect lines to banjo fittings.
5. Install new oil filter.
6. Start vehicle and check for leaks. Be sure to check oil levels and add
oil if necessary.
7. Reinstall front bumper with OEM pop clips and screws.
SANDWICH PLATE
01 | ASSEMBLING 1/8” NPT PLUGS
1. Inspect components to ensure that male and female port threads
and sealing surfaces are clean and dry and free of burrs, nicks, and
scratches, and/or foreign material.
2. Apply Teflon® tape (or sealant) 1.5-2 full turns in clockwise
direction when viewed from the pipe-thread end. Leave the first two
threads without any Teflon® to avoid contamination.
3. Screw plug into port until it is “finger tight.”
4. Wrench tighten the plug 2-3 full turns. (1/8”npt only)
5. Remove any excess Teflon® after tightening.
6. Notice that no Teflon® tape is inside the npt port area.
Sitting here drinking coffee day dreaming about going fast enjoying the tutorial. One of my many up and coming installs on my G37 👍🏽
Finally a professional DIY Oil Cooler Install
One of the best most informative video installs I have ever seen!!!!! Excellent!!! Major Props Matt!!! :)
John doe, we do have a thermostatic option available for this kit, this is available in the drop down menu of the product page. The thermostat provides quicker oil warmup while maintaining optimal temperatures during aggressive driving. The Mishimoto Thermostatic Sandwich Plate restricts flow to the cooler until a specific temperature is reached (185°F). We highly recommend this for those in cooler climates, however it is very effective in any environment. Let me know if you have further questions!
is it really necessary to have a thermostatic? especially in tropical areas like in florida?
The thermostatic is problematic when you run the car hard, i got 240 degrees with is on the 34row oil cooler, i think im getting rid of the thermostatic sandwich plate.
@@andywu8558 what temperature thermostat are you running?
I’ve had mine sitting for a month or so but this video really helped definitely doing it on my next day off
I had some extra lines in the way of my entire banjo bolt/sandwich plate assembly so my install was definitely not this easy things must differ from year to year with these cars
Which banjo fitting does each line go to (does it matter)? The longer line goes to the "blue"/top one or the bottom/black banjo fitting (@ 8:50)? Thanks
This is how a video should be done and Mishimoto makes a great product of exceptional quality. Please keep up the great work.
Have to add this to my wishlist!
Sweet !! Gotta get afew of these for me and my friends. Thanks for posting.
there is no drilling of the car required? thanks
Need this for my sedan ASAP !!!
should you flush the oil cooler and lines while changeing your oil?
Curious, what if you have a newer 370 with the coolant through oil cooler already on it? Would it need to be removed first?
This would be added on top. This will not replace the OEM system.
Do you guy's make any for the g37 sedan?
Ones for the 370z’s work on the G cars, I’m running one from 370z
Does it matter if the inlet /outlet on the cooler are mounted up right, sideways or upside down??
The orientation of the cooler will not affect its performance as long as you are getting proper air flow to it.
Thinking of getting an oil cooler for my 350Z.
Question: when changing the oil, how is the oil drained out of the oil cooler?
Nismo350Z The oil inside of the oil cooler itself does not need to be emptied, as it only contains 0.5-0.75 quarts. As long as the user follows factory service intervals, this will not cause any sludge or gunking issues. If the user is seriously concerned about the oil within the cooler, it can be removed and turned upside down to empty the contents during a fluid exchange. - Patrick M.
Oh okay....thanks. good to know
should i order this kit for my Nismo 370z with the thermostatic plate? Also, no cutting of the bumper is necessary right? THANKS A LOT!
There’s way of making this fit on a g37 sedan ? Really want this exact on on my sedan
This is not something we have tried. Sorry!
Can i prefill cooler with new oil?
Yes
I still don't even know why they don't just come with one
The 2012+ does
What size is the o ring ? Where can I buy it ?
Please contact us at support@mishimoto.com if you are in need of any replacement items.
Need one for my 13 g37s sedan 😣 I saw that this only applies for coupe. Anything available for sedan model?
We unfortunately do not have a direct-fit kit for the sedan but this can be modified to fit with some minor fabrication.
@@mishimoto What minor fabrication is involved for the sedan.?
Fantastic Job 😎😎
Those this oil cooler has thermostat?
We have an option to include a thermostatic sandwich plate for this kit.
Nice one!
What is the name of that panel tool? I appreciate it
Very good video i am impressed!
indeed
What pushes the oil through the lines and cooler? Anyone
The oil pump
@@mishimoto the oil pump that's on the car or you have to buy one for the cooler
The oil pump that is already attached to your engine. The install guide you are commenting on shows the complete process.
@@mishimoto ok thanks again
Great video
the reason it doesn't come with one is to lower the price of the vehicle for few hundred dollars more to entice potential new customers.
Aww...no love for the 2003-08 Z33s?
Why no roadster version for 370z ? or is it the same ?
Yes it's the same :)
thank you so much for your prompt response!
Which line from the oil cooler goes to which sandwich plate connector?
Our coolers are bi-directional. You can install either line to either port on our sandwich plate.
Thank you!
great
Do you have oil Cooler for GTR32 🙏
Hey Muhammad, we fon't carry a direct-fit kit but we do have universal components that would work out for you here: www.mishimoto.com/race/race-oil-cooler-kits.html
Oil was even lower as front of vehicle raised??!!