RC MN128 JEEP WRANGLER BLACK, CRAWL 2
Vložit
- čas přidán 29. 08. 2024
- This MN128 Jeep really is an excellent base for a 1/12 crawler. Lots of metal upgrades available for the already establised MN86.
Although is very good standard, some lower down weight helps alot. This is where I had previously gone wrong on my MN86. Which will now have a comeback.
Upgrades so far.
* 540 35T injora motor. Needs to be short version to clear the body. Adaptors available on Amazon or Aliexpress for the 540 motor to the standard gearbox
* Metal driveshafts
* Aftermarket adjustable shocks
* Metal 1.9 beadlock wheels
* 90mm Tyres. Not the softest or the best grip. But they look mean...!
* Metal axle links
* front axle moved 5mm forward to give tyre clearance. 3D printed spacers in the links to increase length
* Metal sterring horn to replace servo saver. It 'saves' too much & then fouls the front bumper when the axle is moved.
Still standard ESC, servo & transmitter. They are pretty good out of the box. Best so far for MN models.
Lighting is still standard.
I bought a spare gearbox to make the motor swap quicker & easily reversed. Note that the slipper clutches are supplied loose. I tightened this one, but it still slipped on some climbs. Needs another tweek.
I was very impressed with this truck on this first run. I got loads of footage. So expect to see lots of this one & the grey Jeep soon.
Thanks for watching.
Beautiful rig. Amazing slow control. 00
thank you, glad you liked it. 👍
The tires look great😊👌
Thank you. Yes, they are very effective. Thanks for watching & commenting. 👍😁
@@RC3DPrintAdventure you're welcome my friend 😹👍
Nice video my friend 😊❤
Thank you very much. I really like these MN trucks. We have good taste..! 🙄
@@RC3DPrintAdventure yes really love this model,good taste too 👍🤩
Did you add the hubcaps or did they come with the wheels?
They are hubcaps.
Can you please add a link for the beadlocks and the action figure? I have been looking on Amazon but can't find thos specific ones.
I believe the figure is discontinued now. The wheels were purchased over a year ago now.
Ini terlihat keren
Terima kasih banyak..👍😁
Nice run! Whats the tire size? Is it 1.9 beadlock ?
Thank you for watching & commenting. The tyres are 90mm diameter & 35mm wide. The wheels are 1.9" beadlock. Both wheels & tyres were cheap from Ebay/Amazon. 👍😁
Is there a link? want to buy
What size are those tires? Need hex extension?
The tyres are 90mm diameter on 1.9" wheels. No hex extensions. But the front axle has been moved forward 5mm for clearance using spacers in the metal axle links.
@@RC3DPrintAdventure oh.. sounds complicated. Would you please make a video explaining how that's done? 🙏🙏😀
How do you attach the black widow figure and keep it steady?
Hello, I drilled a hole either side of the drivers seat & ran a cable tie around the figure & under the interior panel. The cable tie acts as a lap belt then. 👍
Action Figure nya ukuran brapa om??
Gambar adalah 14cm
Is there a link? want to buy
Just search MN128 on Aliexpress or Bangood. 👍
can't find the same…