Will It Start? Abandoned 22 YEARS 1969 FORD F100
Vložit
- čas přidán 5. 09. 2024
- Check out our other locked up motor F100 • WILL IT START? Abandon...
In this video, we take on the challenge of reviving a 1969 Ford F100 that's been abandoned for 22 years. This truck has a special story as it was originally owned by Landon's father and was used to build there cabin. Join me and my friend Landon as we attempt to bring this classic truck back to life. Will it start after all these years? Watch to find out!
🔶 Support our Channel by becoming a JMR SuperFAN by Ringing the Notification Bell!
This truck also fought us check it out czcams.com/video/chm9hxezUPc/video.html
Yo what's up, your channel deserves more recognition underrated. Also is there any chance that you can fix the Cadillac Escalade or at least an update video
Heck yeah brother thank you so much for that kind words. Really appreciate that. We should have a video on it soon. I may or may not be buying a 3rd escalde to fix the first 2. Stay tuned
@@JMRRebuilders do you have Marketplace because I'm looking for us to trade this old bread truck I'm located in Fayetteville and do you have a phone number where I can contact you I'm looking for one of the Dentside Ford trucks you have
Ggไทย
Is a straight 6
Sweet man I'm an African-American teenager into old cars I found an abandoned F100 and it's a 1981 though and I'm going to go ahead and get started on that
Hey thanks for watching and commenting. Good luck with it and let us know if ya need anything.
@@JMRRebuilders thanks buddy it's on my CZcams channel
Very good. Take some shop courses (a few basic ones if you aren't on an auto body career track. Otherwise get hold of a Sixties or Seventies vintage car guide. Then get into more complicated stuff (emissions valves, fuel injectors, computers) as time goes by. There are some old Army films on CZcams to provide some excellent references. So much has remained the same even in the age of Teslas. All you have to remember is detail and principles and lots of old tin cans for keeping parts. Then mark the spark plug wires with masking tape.
I got one of those for free about 7 years ago. Someone called me and asked me to haul it away. F100 shortbed step side, 1981. White with blue interior. I towed it home, had it running in about an hour, and sold it the next day for $600! It just had a HUGE vacuum leak!
Oh well can't win them all. Thanks for the channel.
Ya your right kinda sucks honestly. Thanks for comment and support
I've seen several youtubers that get the motor unstuck by taking the clutch inspection cover off, and using a prybar on the flywheel teeth, it's a more direct way to do it and doesn't involve welding a bar to the crank pulley, which I've honestly never seen until this video haha
Thats is actually a great idea. I wish I could claim to be a trend setter but I learned it from Sleeper dude. Also we have another video we did it to and she actually turned over. I will put the link below. I wouldnt do it if the plan is to get that motor running and driving. We have plans with the red truck but they dont inlcude that motor stay tuned. Here the link to the other one czcams.com/video/chm9hxezUPc/video.html
Thanks for the comment and support
I've seen some awkward people, but none like you two!!
Well now I take that as a compliment. Thanks for your super fan support. We appreciate it
Fatso want shut up, poor Landon
Well aren't you something special.
Nice to see someone working on a square body Ford now find yourself a Ford High boy
Well we appreciate that. Well honestly I dont know what a high boy is. However we got a 79 f250 out the woods. Check it out here
czcams.com/video/cYcq_DKsigI/video.htmlsi=Vj-PlphIk01MLiTp
Can't beat those inline 6
Heck yeah if you love this video check out the video below it's a inline 6 too. Thanks for comment and support
czcams.com/video/cYcq_DKsigI/video.htmlsi=kXxJnBdx2bthZron
Farmall h sat over 40 yrs wooden block and a sludge hammer got the motor unstuck put back together same head gasket still running to this day
@@allenmoore4400 let's go. That's freaking awesome sauce. Thanks for comment and support
Good luck with your channel guys! I think you’re going to do well! Keep it up !
Oh man that's so kind thank you so much for that. We appreciate the comment and support.
If you're ever in the Temple GA area...I put together a 1971 f100 about 18 years ago 😅 it has a 351 and I painted it with bed liner. It would be cool to see that truck again 😊 thanks for sharing guys God bless 🙌 🙏
We are Def interested. Reach out to us at ryan@jmrrebuilders.com. we would love to connect on it to come do it
I'm sorry I don't own it anymore..... I lost the phone number to the old boy I sold it to unfortunately. Love the show guys 😊 thanks for responding.
Heck yeah absolutely. Check out our latest video
Howdy Fella that looks like a fun one!
Yeah man she was a bit of a fight. Thanks for comment and support brother
Learned to drive in one of those in 1970. Once i got it in third dad said take your right hand off the wheel and put it on the seat back. Dated my wife in that truck and my right arm was always on her sho ulder. Thanks dad.
Well that's about the coolest comment we have gotten in a whole. Love that so much. Thanks for the comment and support
I had a friend on high school who had a bump side red Ford exactly like that.
That's Flipping awesome. Bet he misses it. Thanks for comment and support
@@JMRRebuilders His had a 390 out of who knows what and a 3 speed on the column.
That's flippin sweet
Looks like a straight 6. Man I learned how to drive on a 1966 dodge cornet 3 on the tree with a slant 6 in it
That's awesome. Love that you got that memory. So cool. Thanks for comment and support
Yall becareful out there with the heat and wasp and other critters@@JMRRebuilders
Heck yeah brother let's go.
Golly I miss Georgia- other than the Atlanta portion. It seems so laid back and you can't but miss it after spending 55 years there.
Yeah it is Def different here. Where you at now? Thanks for comment and support.
East TN near Busyville. Where they measure property values by $/spoonful.
Dang that's rough.
Good video this is my luck with trucks 😂😂😂😂
Let's go brother. Thanks for the comment and support.
thank you all for the support
You power wash it and flush interior out with. Simple. Green yet😊
Great show guys, love the F100 truck. Micah Knight signing out. Can't wait for the next project.
Let's go my guy Micah knight. Thanks for comment and support
It's either a valve open or a rusted piston. To the bore.
We are thinking the clyinders holding vinegar are the issues and the rings are frozen to bore.
@@JMRRebuilders If it werent' for taking the heads off I'd say go with Acetone and tranny fluid and let it soak for DAYS. Sometimes you have to disengage the drive shaft or do like you did and yank the head.
Yeah I have heard of that before. We really didnt have much time. Thanks for the support and comment
Nice job sir cool FORD F100 good show 😃👏👏👏👍👍👍👍
Thank you so much for the support and comment
Very good 👍🤝🇨🇺
Heck yeah brother. Thanks for comment and support.
cool old body style truck.
She's pretty cool for sure. Thanks for comment and support
use an Impact on the crank bolt.
That's a great idea. Should have thought of that. Thanks for the comment and support
I would take it to the junkyard because it's a Ford
Heck yeah your right. We got plans stay tuned. Thanks for comment and support
I think I would have got all the water out of the one cylinder first what a strange video love the Ford that was the only reason why I watched this
That wasn't water brother. That was the vinegar that didn't soak down cause the piston rings are stuck to the wall. If you like the truck we have a ton of other f100 videos. We have plans to get her back on the road. Thanks for the comment and support.
@@JMRRebuilders well thank you for correcting me good luck to get them back on the road
Heck yeah brother. Sorry was not meaning anything by that. Sometime txt is hard to interpret intention.
P B Blaster works the best
We put a full bottle down it before we did the vinegar several days before this bur Def worth a shot. Thanks for comment and support
Put some mystery oil into the plug holes mm
Yeah definitely worth a shot. Thanks for comment and support
You should have used pb blaster or acetone and transmission fluid
Yes that is one option. Thanks for comment and support
Good new frame Do engine go put a hail cat? But look, I am more of a Kaya and there has been fray nice color blue pie. Or black black panther😊
Let's go. Think she's going to go onto a town car frame. Stay tuned. Thanks for comment and support
The front passenger tire has the mud from sitting on the top of it that tire has been removed already
I'm sure ar some point it was moved but not by us till that day. Thanks for comment and support
Transmission fluid in the cylinders
Yeah from what I have learned it isn't as corrosive as the vinegar is. Thanks for comment and support
Marvel Mystery Oil, acetone and ATF, disel, heat, Evaporust- try one of those options in the cylinder. You might even try muraric acid or Coca-Cola.
@adellesloan2112 heck yeah those are all options for sure. Thanks for comment and support
New sub for you just found ur channel i do these as well i love working in rust i had a engine stuck bad but i got it to free up with white vinegar
Let's go. Love me some white vinegar kinda sad this didn't work. Thanks for the comment and support brother. Good luck with yours. Thank you for subscribing and welcome to the JMR NATION
Do everything possible to get it unstuck
Yeah we did the best we got. The rear ends still locked up the suspensions worn and not to mention the transmission has issues. So we plan on doing another video where we put it back on the road in a unique way. Stay tuned thanks for comment and support
You should put more oil in it not vinegar
That was an option from my experience vinegar works wonders because of the acid reaction. Thanks for comment and support
your camera work is getting better.
Slowly but surely. Thanks brother
Stuck rings and valves
@@jonathanmiddleton1141 Def the issue for sure. Thanks for comment and support
I know Ford had another in line 6. I can't remember what it was. Add. The three hundred in line six and they had another one
Yeah this truck came from the factory with a 240 inline six.
Hi Collin from Liverpool in the uk
I think it’s ider do a full rebuild
But I think the cylinders will be damaged
To be honest with you guys I’d rather put a new engine in the truck but it’s down to how much the truck means to you ?????
Heck yeah brother I was born in Guilford Surrey. LETS GO BROTHER. Yeah the thing we really didnt cover much is the truck is worn down really bad. There is significant other issues wrong with it. Thanks for the comment and support we appreciate it.
I noticed you're located in Georgia too with and I have a couple of cars I can trade in for some of the trucks that you have that at least for another drive
Heck yeah we are in ga. Thats awesome. Thanks for comment and support
@@JMRRebuilders hey look if you have any dentside Ford trucks you want to trade I'm in for a trade cuz I'm a dentside crasher
Yeah will keep an eye out.
Ford 6/300 gas engine good tough old motors,.....
Yes sir that's right. She came from the factory with the 240 this one was put in it for 7 bucks. Thanks for comment and support
Clutch stuck to flywheel try that.
That actually isnt a bad idea. Thanks for the comment and support
boi that an i6
Yeah man let's go brother.
Surprised you haven’t disabled the seat belt reminder on your Excursion
Yeah I may need to at some point good catch brother. Thanks for comment and support
It’s a 240 6 cylinder, little smaller than a 300
It was originally from factory a 240. He replaced it with the 300 for 7 bucks. He got it from the airport they used them in the tugs alot.
300 CID. Bulletproof
Well your right bout the engine. She was bulletproof till she wasn't thanks for comment and support
It might be three hundred inline six
Yeah man you nailed it. Thanks for the comment and support.
300 Straight 6
Yeah man she is. She started out as a 240 and was replaced with the 300 for 7 bucks. Crazy right. Thanks for comment and support
Had 58 Chevy locked up like that
Sucks bright thanks for comment and support
300 Six
Let's go brother. Ya nailed it. Thanks for comment and support.
I wouldn't weld it on there.
Yeah we did it to get more direct control for torque. Either way didn't work. Thanks for comment and support
no se puede soldar fundicion con hierro
That's a good point. Thanks for comment and support.
Hope your kidding about the cliff
Yeah, man, we are Def just kidding, brother. Thanks for comment and support
Will you keep the license plate from the car?
Man I do love plates for sure. Gonna have to se about that. Would you keep it?
@@JMRRebuilders I would keep one for myself, and perhaps give the other as a souvenir to someone. I think I should share my findings with someone, if possible.
@@andreylagno2372 that's a good idea. Unfortunately it only has one plate. Thanks for comment
Probably inline 300 v6
Heck yeah you aren't wrong. It was originally a 240. The owner replaced it with the 300 for 7 bucks. Thanks for comment and support
Straight 6
Yea that is correct. Thanks for comment and support
Brake fluid
@drakeweaver5994 yeah would bave been a try but she gonna get chopped up now.
300 6
Nailed it. It originally came with a 240 but was upgrade to the 300 for 7 bucks. Thanks for comment and support
Is it for sale?
@stevengolden1154 no this one isn't for sale. We have plans for her. Stay tuned for that. Thanks for comment and supprt.
I look forward to seeing that update. Thanks
Let's go brother.
@@JMRRebuilders i have a 2001 yellow C5 convertible automatic with custom hood and lights and a bunch more 105k miles I'll trade for the right build 😁😉
lets go sounds awesome. Thanks for comment and support.
un sobremango y si se rompe no sirve
Good deal.
Fix it
We have a plan for it that will kinda fix it. Stay tuned. Thanks for comment and support
Try to pollstart it
Yeah that would be a nice option but seeing how stuck it is may not work.
Put it in gear and pull it with a tractor or something
That's a good idea should have thought of that. Thanks for comment and support
Brown Brenda Rodriguez Maria Clark Steven
What?
Yours must been really bad sorry
Yeah as you see she's really locked up tight. Thanks for comment and support
@@JMRRebuilders I am out of ideas I go to vinegar like you for bad ones so brother keep up what your doing like your style thank you
Heck yeah brother. That's awesome. Great minds think alike.
Rat pee and moisture
That's highly likely. Thansk foe comment and support
Not worth the watch folks. Just skip through it. It's an hour of watching a guy just try to pull a truck out of a hole. Not worth your time.
Its cool to have your opinion brother glad you watched and commented. Thanks for the support
What part of Georgia yall in?
We are in the south Atlanta area. How bout you? Thanks for comment and support
@@JMRRebuilders I'm in catoosa county Georgia. If I had a way to get that truck down here I'd be putting my Plymouth slant 6 In it.
Heck yeah that's awesome. We got plans for her soon. Don't ya worry bout that.
It's getting harder fine ole school 🚸 trucks 🛻 / keep it not crushed it / I like rusty trucks 🛻👌🤙🤜🤛👍👊🤘💪
Heck yeah brother let's go. We got plans for it. Stay tuned. Thanks for comment and support