Nice save, no matter what you do with it 😁👍 Glad to see it run and move under its own power. Sounds good also. Glad to see Zane help in the fun as well. Take care and happy wrenching 🔧🔩
Maybe address the severe shaking on acceleration, add a couple of doors, seat cover, basic engine overhaul but add a turbo. Love the look at the boxy dodge pickups.
This truck comes stock with a turbo and a "Charge Cooler" also know as an intercooler. You can tell the ones with a charge cooler because the air intake goes to the front and not over the cover on the top.
I tried having a key cut with my 92 pattern on one side and my 95 truck pattern on the other side. They cut the key correctly, but the key did not work in either truck. I have read that the pattern is read on both sides of the key, but have not been able to confirm that.
Ok, as for what to do with it. If you have a much better cab, you could consider that. But, unless it is from a diesel, cab the swap is not that easy. I have a 92 D350. The body is ok in terms of rust. But, if I had a 95-97 3500 body I would put the engine and trans in that. Even though it is a club cab which is the only type cab I would own for 93 and older, the suspension is too harsh on those "first gens", as some people call them. For me anyway.
That Cummins is a perfect donor for that Warlock. Looked like metal flakes in the pan sediment? Why is the oil PSI indicator on and gauge so low? Temp gauge seems to be working better.
You don’t need to worry about Bruce Jenner fluid in your shipping crate. Better not park a Ferd by that shipping crate. It may catch 2nd hand electrical problems.
what the hell I have never seen trans fluid like that something must of got into that to look that way. All the fluid should of been pumped out of that trans but I guess it's much better than it was now that the trans can pump fluid through the filter
I have that same steering wheel in my 92. Unfortunately, most of them got the sticky problem. There is no replacement other than the exact same one and I have heard that every one is now sticky. Is yours sticky? Other year Dodge truck and car steering wheels won't substitute because of the unique air bag configuration.
So is that floor shifter is something for a PTO? I wonder if that is making the noise. I thought it was U joints at first when the noise remained constant even when moving in neutral but dropped to nothing when stopped.
Hi TC do you have any international scouts out there I know you are big into Dodge looking for scout but maybe something with 4x4 that I can rebuild thank you sir
as nucg crap was in it the filter might get clogged after awhile so yeah run it awhile change again with new filter for peace of mind i did in the truck ive been driving for 4 years now
Dont low ball him he knows what he's got 🤣
Nice save, no matter what you do with it 😁👍 Glad to see it run and move under its own power. Sounds good also. Glad to see Zane help in the fun as well. Take care and happy wrenching 🔧🔩
I voted for throwing it away!
Thanks friend!
Put a set of wheels on it and sell it to a kid
20” rubber bands and 15k SOLD!
How the hell do you only have 7.6k subscribers? Your production quality is getting better and better, keep up the good work TC!
Because there so many people on CZcams doing it now. Takes a long time to get really get recognized
I really appreciate it! I’m not sure, aside from what David here said. A lot of people are now doing this. Hoping to stick with it and out last them!
Your son covering his eyes in the truck was priceless
I think that green crew cab Ford needs a Cummins in it and some Gin poles😂😂
That's the spirit!!!!!!
Green for has since lost a very important piece to be saved lol
I had a 92 identical to that. Best truck i ever owned. Leaf spring front...
I cannot wait to get a diesel truck dude, I am so pumped cool video
I have a 1992 Dodge Cummins 12 valve Dually. It eats driveline u-joints but everything else is great.
I would do another filter and transmission fluid change just to be safe since the first change you saw how bad the filter was clogged
This has became my favorite CZcams channel
Thank you very much! More to come!
Just subscribed. You are underrated.
Thank you, one day we will make it!
Ohhh man another episode your show is awesome love the comedy and trucks but I would like to see some ford rangers up in here 😁
Maybe one day!
Swept line crew cab and a stubby stepside bed with a camper shell, make a 60s model Durango hahaha
Here in Mi that would be a rebuild worthy truck😁😁👍👍
Proof that These trucks refuse to die no matter what you do
They are tuff as nails!
It has a gin pole it's a keeper😂😂
I like to see trucks like this get restored to original.
I may do this.
Love the truck.
Save it !!!! It’s a first gen
I have 2 of them !!!
If not sell it to me
I think she can be saved!
Maybe address the severe shaking on acceleration, add a couple of doors, seat cover, basic engine overhaul but add a turbo. Love the look at the boxy dodge pickups.
This truck comes stock with a turbo and a "Charge Cooler" also know as an intercooler. You can tell the ones with a charge cooler because the air intake goes to the front and not over the cover on the top.
I tried having a key cut with my 92 pattern on one side and my 95 truck pattern on the other side. They cut the key correctly, but the key did not work in either truck. I have read that the pattern is read on both sides of the key, but have not been able to confirm that.
Ok, as for what to do with it. If you have a much better cab, you could consider that.
But, unless it is from a diesel, cab the swap is not that easy.
I have a 92 D350. The body is ok in terms of rust. But, if I had a 95-97 3500 body I would put the engine and trans in that. Even though it is a club cab which is the only type cab I would own for 93 and older, the suspension is too harsh on those "first gens", as some people call them. For me anyway.
That Cummins is a perfect donor for that Warlock. Looked like metal flakes in the pan sediment? Why is the oil PSI indicator on and gauge so low? Temp gauge seems to be working better.
I’ve got another donor in mind for the Warlock.
You don’t need to worry about Bruce Jenner fluid in your shipping crate.
Better not park a Ferd by that shipping crate. It may catch 2nd hand electrical problems.
what the hell I have never seen trans fluid like that something must of got into that to look that way. All the fluid should of been pumped out of that trans but I guess it's much better than it was now that the trans can pump fluid through the filter
It was trashed hard! I drove it today and it’s still working.
❤❤saludos desde nuevo laredo🎉🎉puro DODGE RAM🎉🎉❤
Rip Toby kieth
I have that same steering wheel in my 92. Unfortunately, most of them got the sticky problem. There is no replacement other than the exact same one and I have heard that every one is now sticky. Is yours sticky?
Other year Dodge truck and car steering wheels won't substitute because of the unique air bag configuration.
Try blech white tire cleaner!
So is that floor shifter is something for a PTO? I wonder if that is making the noise. I thought it was U joints at first when the noise remained constant even when moving in neutral but dropped to nothing when stopped.
The floor shifter is an old winch control, it just has 2 wires coming out of it that are not hooked to anything
trans filter stopped up
Well good luck with that one. I may be a $ pit.
We will see!
Do another trans and filter change again.
I probably will end up getting it rebuilt
Hi TC do you have any international scouts out there I know you are big into Dodge looking for scout but maybe something with 4x4 that I can rebuild thank you sir
I found one just last week! But it wasn’t for sale..
22:50 Conan?
Perhaps lol
I got a trans for it in Austin if you’re interested
Thanks. It seems to still be hanging on.
change fluid again after running it a bit as nasty as that was i would cheaper than another trans just saying
as nucg crap was in it the filter might get clogged after awhile so yeah run it awhile change again with new filter for peace of mind i did in the truck ive been driving for 4 years now
so yeah fix it up give it a quick black paint job and boom got you a hell of a work truck
What camera you rocking ?
And what editor you using ?
Just a iPhone idk what editor he uses
I foam lol and splice.
I say restore it make it a parts runner grocery getter truck
I’m thinking the same thing.
I'll take the truck I'm just kidding but I really do need a vehicle but I don't have any money not even a job
Better get to work!
Restore it
better truck than what your driving to pull it lol real trucks not rams or should i say fiats
Not at all the grinch is a better truck, standard and 4x4
hope you only paid like $500 for it lol
Pretty close to that
Ehhh..add a bit lol
@@tcfinds 😂 love the vids man!
Thanks man
U can’t use type f fluid in a dodge….. congrats you fried the trans!
It still works