Usually the most common issue with these is the motor shaft gear (9,or 10 tooth) gets a little tiny split in it, causing the gear not turn properly. This explains why the head was making a loud buzzing sound. There's nothing to turn the gears inside. It's a pretty simple fix if you know how to fix it. If you would like to fix your singing fish, check out my channel and look for the video called "how to repair your singing fish's head". Same goes for the tail, and mouth
I remember when i was younger my dad used to buy me broken toys or electronic devices for me to disassemble with him in the workshop, great times and great vídeo as always! Happy holydays from Argentina!
Ahoyhoy! I used to de latexify toys like this to see how they work. when I was a kid, my parents saw my fascination with learning how animatronics worked as a toy breaking phase and sadly most did get thrown away. I actually like having broken shabby looking animatronics , it adds character to the look!
Hi Mr. Pete, All, At 15:57, there is a small vertical circuit board right above your thumb that has a black blob on it. Under that black blob is likely one or more integrated circuits such as a microprocessor, and or digital to analog converter. That's the conductor of the whole show. Everything else, resistors, capacitors, transistors, wires, appears like common off the shelf parts you could get from an electronics supplier such as Digi-Key. The arrangement of all of the parts, the position of each part's lead holes, and the shaping of the each part's leads, makes me fairly certain that these parts were assembled by hand to the circuit board. The circuit board per se is of the least expensive "brown board" variety, where copper traces are only found on one side, and jumper wires were used if needed on the top side to complete the circuit routing.
The black epoxy / die combo is known as COB "chip on board". It's the cheapest way of adding an IC to anything in large volumes. Usually reliable, it's basically impossible to repair if anything goes wrong.
There was one at our shop above a desk and was forever pestering us with his songs. That desk was close to the trash can and anytime an item was thrown at the can Billy would crank up. Thanks for doing what I had thought about doing several times.
Wow i am jealous! I am a gemmy collector and i payed like $50 for mine, also my whole family are driven insane by my billy! Also this one is broken, the head is meant to stick out when the mouth moves.
That was GREAT! Now run the video in reverse for everyone to see how "Billy Bass Comes To Life". Merry Christmas andHappy New Year to you and your family. I enjoy and learn from every one of your videos, hope they continue for a long, long, time.
Mr. Pete that "headphone jack" is actually a sensor and if you turned billy off he could still operate by pressing the red button. The on/off switch only controls the sensor.
If you pause at the 16:01 minute mark you will see that big black dot of epoxy on the left of the mother board. Under that is the chip that has not only the sound but the programming that controls the whole thing. They epoxy the chip to keep it "protected". Basically so you can't steal the code/music. Fun video!
best thing to happen to billy the big mouth bass found it very funny and entertaining love the what makes it work series merry Christmas mr pete and family and all the best for the new year
That was a nice catch, Lyle! The biggest largemouth bass I ever caught was only 10#, but that isn't too shabby for an IL farm pond. Anyway, I would have thought that Jordan would be interested in the gears, motors, and electronic components for some projects since he has you for guidance and inspiration. Unfortunately, far too many of the youth today would rather be playing video games instead of making something cool, which the demise of the shop classes contributes to. I hope you and your family have a merry Christmas!
Excellent mrpete. That's the best gutting and filleting job I have seen for a long time. I like this series very much. Have a great Xmas holiday and a Happy New Year to you and your family. regards from the UK
Amen on the short life of novelties like this. I just got my Eva a little gnome that wolf-whistles when someone walks in front of him. Not even Christmas, and the "shiny" is already gone. I expect he will end up in the next garage sale (after I have retrieved the batteries).
my black and brown wire coming out of motor got separated from billy's circuit board .now i don;t know which wire should be soldered to M1- and M2- (- is negative).will i fry the motor if i connect wires incorrectly..thank you for assistance .Ross
well i thought they were using servo motors but now i am curious how they protected those DC motors from overcharging for example when the mouth is fully open or the body is fully rotated ; the motor is still on but it doesn't rotate that's why we keep hearing that buzzing sound . i think they are using some current limiting circuit and i need some schematics LOL. by the way ,i think that black thing under the red button is a motion sensor, that's why when you moved your hand over it(at 3:10) or when you flicked your knife it started moving. well , thank you very much for the video : +1
They don't. All they rely on is the fact that the voltage doesn't exceed a value that would make a 'dangerous' amount of current flow through the windings.
All those motor driven mechanical movements can be explained by reading the book Mechanical Movements Devices and appliances by Gardner D Hiscox M E printed in 1917 fifteenth edition.
I caught a 24 ft grey nurse shark and the thing has taken a supporting wall down with it's thrashing and wiggling. The thing also constantly swears 'f'ing and c'ing' and telling anybody who approaches to 'get stuffed'. I should have thrown it back.
I near split myself watching you skin Billy out with him still flopping around! I hated those things and often wanted to do what you did. Should have the ceremonial flaming burial for the remnants of Billy. Great videos and keep doing what you do.
Thank you for demonstrating the proper use of wire-cutters...! And...on that circuit Board...at one side, with the 7-8 contacts...a tiny metal 'heat-sink' with a dab of black epoxy....under that epoxy is a small integrated circuit that has a bit of built-in 'memory' that controls everything and generates the 'music'....similar stuff can be found in cheap digital watches and 'musical' toys...I even found a similar circuit inside the red LED flashing light for my bicycle...
Ahoyhoy, what I did was cut the back part and then carefully stretch the latex over the endoskeleton so I could put him back together after I was done learning how it works.
6:45 And Miles Dyson and his wife from the terminator are sitting on the floor shocked... Joking a side, its clever how the motor movement for the jaw and parts synchronise with the songs
You can play the songs on youtube, I do it all the time on my other channel. All that happens is you MIGHT lose the ability to monetize the particular video in question. since you don't own the rights to the song. But in this instance I doubt the algorithm will detect your song since they're not the originals. Both the originals were performed by The Talking Heads and Bobby McFerrin respectively.
A classic ! Lessons learned: One of the mom's took away the D batteries that this ran on. Revelation: AA batteries are the same length as D batteries. Solution: Take the batteries out of the TV remotes, and put them in Billy Bass. Mom.......................FURIOUS !!!!!!!!!!!!!!!! It's a riot and a learning experience for the children about making due with what they have.
Is there going to be a #12a video titled mrpete222 reassembles Billy the Big Mouth Bass? In all seriousness, thanks for the video and in my opinion the knowledge you shared (gear trains and small motors) are everywhere around us is well worth the 50 cents spent at the garage sale. Looking forward to the next video in the series.
Thanks for making this video, i've learned a lot without the work, Ebay sells the 9 tooth gear that makes his head move, Im hacking my bass to work with my amazon Echo!
Hopefully the kids will see this video and will take theirs apart. I agree that those things were funny the first time you saw it and gets real annoying shortly afterward. Chris
Tobermorey, Ontario. The upper end of Georgian Bay 1998. A gift shop that we frequented on a regularl basis. Billy the Bass. Every time. Billy the Bass did his thing. At the end of 4-5 days, I wanted to take a sledge hammer to Billy the Bass. But what makes him tick? Well, Mr Pete222 just demonstrated what Billy does. But he didn't show it. I still want to take a sledge hammer to Billy. To understand why, Mr Pett222 has to demonstrae what Billy says.
+mrpete222 Billy was in the far back corner of the store well away from the clerks and the cash register. Billy was actuated by hi infrared beam. (You DO know that bass have an infrared beam which is what makes them flip, flop, and flap when you pick them up.) Very excellent disection. Your biology prof would give you an A+.
My brother reprograms these. Do a search for "tiger bass band sings radio active" here on CZcams. He's mounted several of them to a wall along with a tiger that was like Billy Bass. He's an absolute genius when doing stuff llike that.
A motherboard is a board which has a daughter board associated to her. That looks more like she is an orphanboard. Incidentally I would called it a "mobo" just because it sounds cool, but been a expansionless mobo why not just call it a PCB? ... Boy! It was hard to write all that stuff and avoid the software trying to correct my spelling al every single word. It would have made this comment understandable. Marry Christmas to you Lyle and everyone one else too.
One of the electronics guys where I worked opened one of those THAT WAS EASY buttons, from Staples, and reprogramed it with a few different phrases. The guys I worked with were, for the most part, a rough crowd, so you can imagine. One of the modified buttons would repeat several different phrases, at random. The foreman special button said "Get back to work" and "WXX do you want?" and I'M GONG TO KICK YOUR XXX."
Lol you won't be copyrighted by billy's music. I've made like 10 videos of it with the sound and haven't get copyrighted ever, but I like the picture with the bass
I have gotten kicked off of CZcams for including certain music in the videos. I have several more brand-new Billy's in the box. II hope the ball one up with a cherry bomb
I have gotten kicked off of CZcams for including certain music in the videos. I have several more brand-new Billy's in the box. II hope the ball one up with a cherry bomb
This is helping me repair a Billy Bass. Thanks for your sacrifice to this guy.
I had a big big laugh... the humor was great... especially when he was still moving, after being "gutted"! Thanks a lot... made my night!!
+True Machine Automation THANKS FOR WATCHING
Usually the most common issue with these is the motor shaft gear (9,or 10 tooth) gets a little tiny split in it, causing the gear not turn properly. This explains why the head was making a loud buzzing sound. There's nothing to turn the gears inside. It's a pretty simple fix if you know how to fix it. If you would like to fix your singing fish, check out my channel and look for the video called "how to repair your singing fish's head". Same goes for the tail, and mouth
I remember when i was younger my dad used to buy me broken toys or electronic devices for me to disassemble with him in the workshop, great times and great vídeo as always! Happy holydays from Argentina!
+Emilio Benítez you had a good dad
Did you ever disassemble a billy bass or singing fish?
Ahoyhoy! I used to de latexify toys like this to see how they work. when I was a kid, my parents saw my fascination with learning how animatronics worked as a toy breaking phase and sadly most did get thrown away. I actually like having broken shabby looking animatronics , it adds character to the look!
Hi Mr. Pete, All,
At 15:57, there is a small vertical circuit board right above your thumb that has a black blob on it. Under that black blob is likely one or more integrated circuits such as a microprocessor, and or digital to analog converter. That's the conductor of the whole show. Everything else, resistors, capacitors, transistors, wires, appears like common off the shelf parts you could get from an electronics supplier such as Digi-Key. The arrangement of all of the parts, the position of each part's lead holes, and the shaping of the each part's leads, makes me fairly certain that these parts were assembled by hand to the circuit board. The circuit board per se is of the least expensive "brown board" variety, where copper traces are only found on one side, and jumper wires were used if needed on the top side to complete the circuit routing.
EXCELLENT SIR, … no one else has shown anywhere close to what you have shown and to top it off a GREAT sense of humour !
Thanks
Love this Lyle! "I'm gonna cut him open from stem to stern here..." Classic!
The black epoxy / die combo is known as COB "chip on board". It's the cheapest way of adding an IC to anything in large volumes. Usually reliable, it's basically impossible to repair if anything goes wrong.
There was one at our shop above a desk and was forever pestering us with his songs. That desk was close to the trash can and anytime an item was thrown at the can Billy would crank up. Thanks for doing what I had thought about doing several times.
+Ronald Gilleland Did someone sneak it into the trash?
Billy Bass wearing a Christmas hat and singing Christmas songs...worst Christmas gift I ever received.
+fall22123 white elephant gift
"i haven't seen him doing that later , i must've cut a nerve" 7:27 LOL
Now I know how does the big mouth billy bass fish works
For a minute there I thought I was in Biology class dissecting, instead of shop class. LOL Great video.
+Josaljo Won lol
Thank you very much for showing me how billy bass works because I am so interested in stuff like this so that I can fix billy and other singing fish.
😄
You killed Billy!
I took one of those apart a few years ago. I never knew it was so tidy inside. We used a 12 gauge.
+1musicsearcher I'd like to see a video of that
Singing cowbos
No doubt, … you are American !
@@mrpete222 i'm just happen that my dads fish is gone
i think it gave me nightmares
@@mrpete222 Billy Bass is everywhere
My new favorite how-to fillet a fish video!
+MrGoosePit Thanks
That "earphone Jack" is actually the motion sensor. Another awesome video!
Sure hope PETA doesn't see this one. I'm sure they'd find something objectionable!!!
I don't know, this just might be a fish even PETA would want gut after several hours of hearing its nonsense.
+watcherjohnny They value animals over people
Wouldn't be surprised if they did, they would rather a baby die slowly and painfully of a diseasd than a kitten get ran over
Wow i am jealous! I am a gemmy collector and i payed like $50 for mine, also my whole family are driven insane by my billy! Also this one is broken, the head is meant to stick out when the mouth moves.
Love your sense of humour! Thanks for the wonderful video.
Thumbs up, The black item you thought was earphones is a motion detector , a cool circuit .
+Robert Perrigo Thanks
Some designers went to a Hell of a lot of trouble just to produce a silly gag. A friend had one of these and it was funny the first time.
+carver3419 true
That was GREAT! Now run the video in reverse for everyone to see how "Billy Bass Comes To Life". Merry Christmas andHappy New Year to you and your family. I enjoy and learn from every one of your videos, hope they continue for a long, long, time.
+Eddie Kawecki good idea
11:59 "you can use those on future projects but since I'm 72 there aren't too many future projects left" LOL you are a very funny old man XD
Big mouth Billy Bass is is extremely common to find
Mr. Pete that "headphone jack" is actually a sensor and if you turned billy off he could still operate by pressing the red button. The on/off switch only controls the sensor.
From chile thanks very useful complete teardown 🙂
Muito bom 👍👈 sucesso aí família 🤝
If you pause at the 16:01 minute mark you will see that big black dot of epoxy on the left of the mother board. Under that is the chip that has not only the sound but the programming that controls the whole thing. They epoxy the chip to keep it "protected". Basically so you can't steal the code/music. Fun video!
+Marc Schaefermeyer Thanks
Looks like a hammer and chisel mechanic got a hold of Billy :-)
+Jerod Matlock Looks that way
He will never Forget this
best thing to happen to billy the big mouth bass found it very
funny and entertaining love the what makes it work series
merry Christmas mr pete and family and all the best for the new year
+Andy Coakes Thanks
That was a nice catch, Lyle! The biggest largemouth bass I ever caught was only 10#, but that isn't too shabby for an IL farm pond. Anyway, I would have thought that Jordan would be interested in the gears, motors, and electronic components for some projects since he has you for guidance and inspiration. Unfortunately, far too many of the youth today would rather be playing video games instead of making something cool, which the demise of the shop classes contributes to. I hope you and your family have a merry Christmas!
+Jeffrey Vastine Thanks for watching---it was a nice fish-caught many last sum
Enjoyed the dissection of Billy the annoying big mouth bass. Thanks for all the vids.
+Yiorgos Kay Thanks
Excellent mrpete. That's the best gutting and filleting job I have seen for a long time. I like this series very much. Have a great Xmas holiday and a Happy New Year to you and your family. regards from the UK
+Gary C Thanks
A very interesting watch. Thanks for the upload, mrpete222.
Thanks,
Beau Gaultier
+Beau Gaultier thanks for watching
You'll shoot your eye out mister ! Merry Christmas Mr. Pete
+mrbakerskatz lol
I enjoyed the autopsy Mr.Pete.
Merry Christmas to you and yours!
Regards,
Duck
+camojoe2 Thanks
Amen on the short life of novelties like this. I just got my Eva a little gnome that wolf-whistles when someone walks in front of him. Not even Christmas, and the "shiny" is already gone. I expect he will end up in the next garage sale (after I have retrieved the batteries).
+Peter W. Meek Yes, the fun is gone before the batteries quit
my black and brown wire coming out of motor got separated from billy's circuit board .now i don;t know which wire should be soldered to M1- and M2- (- is negative).will i fry the motor if i connect wires incorrectly..thank you for assistance .Ross
well i thought they were using servo motors but now i am curious how they protected those DC motors from overcharging for example when the mouth is fully open or the body is fully rotated ; the motor is still on but it doesn't rotate that's why we keep hearing that buzzing sound . i think they are using some current limiting circuit and i need some schematics LOL.
by the way ,i think that black thing under the red button is a motion sensor, that's why when you moved your hand over it(at 3:10) or when you flicked your knife it started moving.
well , thank you very much for the video : +1
They don't. All they rely on is the fact that the voltage doesn't exceed a value that would make a 'dangerous' amount of current flow through the windings.
High voltage toys with fried speaker chips be like: 9:30
All those motor driven mechanical movements can be explained by reading the book Mechanical Movements Devices and appliances by Gardner D Hiscox M E printed in 1917 fifteenth edition.
+Gord Taylor Thanks-own it.
I must say I had a good laugh all the way through the video.
Merry Christmas.
Mike
+Oldvet1946 Thanks
mrpete222 u
I caught a 24 ft grey nurse shark and the thing has taken a supporting wall down with it's thrashing and wiggling. The thing also constantly swears 'f'ing and c'ing' and telling anybody who approaches to 'get stuffed'. I should have thrown it back.
I near split myself watching you skin Billy out with him still flopping around! I hated those things and often wanted to do what you did. Should have the ceremonial flaming burial for the remnants of Billy. Great videos and keep doing what you do.
+wvrockcrusher Thanks for watching I have another one I intend to smash in a future video
Thank you for demonstrating the proper use of wire-cutters...! And...on that circuit Board...at one side, with the 7-8 contacts...a tiny metal 'heat-sink' with a dab of black epoxy....under that epoxy is a small integrated circuit that has a bit of built-in 'memory' that controls everything and generates the 'music'....similar stuff can be found in cheap digital watches and 'musical' toys...I even found a similar circuit inside the red LED flashing light for my bicycle...
+Doug Ankrum Thanks
I had a good laugh on this one. Thanks, I needed that!
+Ernie Noa Thanks
Yayy! nice little funny video for 50 cents! 😃
+BlessedSelf Thanks
Thank you for unmasking this. I had thought a mounted Bass that spoke and moved was evidence of demonic possession.
+MrShobar Thanks for watching
What looked like an ear phone jack is the motion sensor, used to activate the fish.
+misfitsailor Thanks
Ahoyhoy, what I did was cut the back part and then carefully stretch the latex over the endoskeleton so I could put him back together after I was done learning how it works.
billy the bionic bass.. thanks for sharing sir...
+Kevin Willis the other song was called ( don't worry be happy ) can't remember who the singer was...
+Kevin Willis That would be Bobby McFerrin, quite a legend. Peace!
+enlishbob thanks for that..
+Kevin Willis Thanks
6:45 And Miles Dyson and his wife from the terminator are sitting on the floor shocked... Joking a side, its clever how the motor movement for the jaw and parts synchronise with the songs
Singing Trophy Animals. Very simplistic animatronic toys
You can play the songs on youtube, I do it all the time on my other channel. All that happens is you MIGHT lose the ability to monetize the particular video in question. since you don't own the rights to the song. But in this instance I doubt the algorithm will detect your song since they're not the originals. Both the originals were performed by The Talking Heads and Bobby McFerrin respectively.
Thanks
I wonder if it would be possible to extract the signals from the Chip On Board
For Billy may he Rest In Pieces
lol
Very cool content, thanks TC! Peace,prosperity, good health and happiness my friend! Seasons Greetings from Canada!
+howder1951 Thanks
That is the Gemmy Industries Big Mouth Billy Bass
A classic ! Lessons learned: One of the mom's took away the D batteries that this ran on. Revelation: AA batteries are the same length as D batteries. Solution: Take the batteries out of the TV remotes, and put them in Billy Bass. Mom.......................FURIOUS !!!!!!!!!!!!!!!!
It's a riot and a learning experience for the children about making due with what they have.
👍👍
Is there going to be a #12a video titled mrpete222 reassembles Billy the Big Mouth Bass? In all seriousness, thanks for the video and in my opinion the knowledge you shared (gear trains and small motors) are everywhere around us is well worth the 50 cents spent at the garage sale. Looking forward to the next video in the series.
+Erik Tedder too late-he's in the river
I was hoping you would chuck that up in the bridgeport and take a skim cut with one of those fly cutters.
+Albion Laster the parts would fly
That black thing at the bottom of the nameplate is not a headphone jack it's a motion sensor
I think that little dot below the power button was a photo eye so Billy would not run at night.
+htral I hope so
Forgot to ask, did you bury the batteries too. Enjoyed the video.
I don't remember, I will have to dig him up
Well, "Don't Worry, Be Happy" may be like a Bob Marley song but that doesn't mean you can't post that song on CZcams!
That just creeped the heck out of me!
gave me flashbacks of biology class and shark dissections :P
+Tim Hyatt yes
That jaw is terrifying without skin
LOL, Great video.
Merry Christmas
+Lee Waterman Thanks
The switch in the back is to turn on and off the sensor in the front of the board
We owe Mr. Pete big for taking one of these out of service!
+ShysterLawyer yes,Thanks
Would it be okay if I posted a parody of this video on my original Lemax Studios channel or would you rather me not do that
Yes, it is OK. And then send me the link to the video
Thanks for making this video, i've learned a lot without the work, Ebay sells the 9 tooth gear that makes his head move, Im hacking my bass to work with my amazon Echo!
Someone had to go through a lot of trouble to create such a "technologically complicated" toy. I guess they had a good laugh too along it's design
the thing you thought was an earphone jack is actually a motion sensor
Billy died in the name of science, not in vain!
Hopefully the kids will see this video and will take theirs apart. I agree that those things were funny the first time you saw it and gets real annoying shortly afterward. Chris
+shadowdog500 ..Yeah.....the period between funny and annoying is around 30 seconds....
I always love the big mouth Billy bass
Cool! I collect singing fish :)
+Randy Lent Must be a noisy collection
Tobermorey, Ontario. The upper end of Georgian Bay 1998. A gift shop that we frequented on a regularl basis. Billy the Bass. Every time. Billy the Bass did his thing. At the end of 4-5 days, I wanted to take a sledge hammer to Billy the Bass.
But what makes him tick? Well, Mr Pete222 just demonstrated what Billy does. But he didn't show it.
I still want to take a sledge hammer to Billy. To understand why, Mr Pett222 has to demonstrae what Billy says.
+Robert A Moore how did the clerks tolerate it
+mrpete222 Billy was in the far back corner of the store well away from the clerks and the cash register. Billy was actuated by hi infrared beam.
(You DO know that bass have an infrared beam which is what makes them flip, flop, and flap when you pick them up.)
Very excellent disection. Your biology prof would give you an A+.
Dam Mr Pete a waste of good sushi , nice white fillets.
+Giovanni Brazzoli good bait
My Dad always said " Take it apart and see what it's made of". Then he'd tell me to put it back together.
+MrHevyshevy Maybe I'll reassemble BILLY
Thanks for the fun!
lol
My brother reprograms these. Do a search for "tiger bass band sings radio active" here on CZcams. He's mounted several of them to a wall along with a tiger that was like Billy Bass. He's an absolute genius when doing stuff llike that.
he sings take me to the river and dont worry be happy
A motherboard is a board which has a daughter board associated to her. That looks more like she is an orphanboard. Incidentally I would called it a "mobo" just because it sounds cool, but been a expansionless mobo why not just call it a PCB? ... Boy! It was hard to write all that stuff and avoid the software trying to correct my spelling al every single word. It would have made this comment understandable. Marry Christmas to you Lyle and everyone one else too.
+Frank Acosta lol
One of the electronics guys where I worked opened one of those THAT WAS EASY buttons, from Staples, and reprogramed it with a few different phrases. The guys I worked with were, for the most part, a rough crowd, so you can imagine. One of the modified buttons would repeat several different phrases, at random. The foreman special button said "Get back to work" and "WXX do you want?" and I'M GONG TO KICK YOUR XXX."
+Bob Smith very clever
GLAD YOU CUT THE SPEAKER WIRE , (( SO WE COULDN'T HEAR HIM SCREAM )) :-)
POOOOOOR BILLY . :-)
You know, as Billy last wish you should take it to the river and put in the water.
+norbsli Thats good-I'm going to add that
+mrpete222 what you thought was an earphone jack is actually a sensor that would turn Billy on when he saw someone near him. Enjoyed your funnies.
+specialks1953 Yep, it's a small motion detector. To scare unsuspecting mothers!
+norbsli Too much lead in the older--EPA would track me down
Don't Worry Be Happy
my fave MrPete222 vid!
Now I also now, how a real nature Fish looks inside. I never looked inside, because I ate them very fast. ;-)
Lol you won't be copyrighted by billy's music. I've made like 10 videos of it with the sound and haven't get copyrighted ever, but I like the picture with the bass
I have gotten kicked off of CZcams for including certain music in the videos. I have several more brand-new Billy's in the box. II hope the ball one up with a cherry bomb
I have gotten kicked off of CZcams for including certain music in the videos. I have several more brand-new Billy's in the box. II hope the ball one up with a cherry bomb
mrpete222 that's cool
Only thing worse than Billy Bass is Christmas Billy Bass that sings Christmas songs.
+Mark Helms true
Rip big mouth billy bass 1999 2015
Over here we practice a lot of "catch and release", now, it's a little too late for Billy.... :( lol
+pierre beaudry Haha Pierre, he is going to release him... Right into the trash can.:>)
Mike
I think he is in the "filet and release" club. lOL Chris
Lol...
+pierre beaudry HAPPY NEW YEAR
This fish do not scream.
around april or may you should find hully gully Christmas santa at a yard sale... rc
+Rusty Case hope I do