Stan Meyer 8xa Circuit Single Cell 50V 1 AMP HHO Well Water
Vložit
- čas přidán 28. 10. 2011
- This is our new Stan Meyer 8xa Electrical Polarization Process Board.
Generating lots of gas at 50V, 1 Amp.
Now available as board only or together with components.
For more info: www.stansdream.com/products.htm - Věda a technologie
As you can see in the scope, the circuit uses pulsating dc at the output, which is what Stan focused on. There is no resonance, but lots of gas output.
This was Stan's demo box for the patent office.
His later design tracked the changing conditions in the fuel cell and adjusted to it to keep it in resonance. Much more to come...
thank you for sharing this inspiring footage! would you be so kind to break down Stan's patent into components in English. God bless his soul, hes transition to heaven is an outer loss for humanity, but his written wording is challenging to understand. btw are you related to Stan?
stans technology is more than it just being plug and play it needs to be fine tuned like a piano otherwise you get nothing and the 8xa is just a percentage of the technology you need to get crazy gas output to run an engine.PWM A DRY CELL AND SOME K.O.H is your best bet for now
do you know how Meyers used a variac as variable charging choke on his early work?
yes i know but i ha d it running today on my dry cell if you dont use KOH it doesnt work the only way is koh it was using just 40 watts of power and i had bubbling which is impossible with a pwm the downfall is my bridge rectifier it can only handle 8 amps so i m gonna change that to a 40 amp 600 volt and give it some amperage to see if i can an effecient gas production my aim is to make a home heating unit just with 300watts of power
@stanmeyerlives my coils are wrong when i change them i get different readings. show gas production from your cell using a plastic bottle and you ll see it wont even be a litre a minute
@stanmeyerlives of course everyone is doing it but not with the 8xa. THEY are all using K.O.H PWMs and distilled water and high amps 25 to 30 at least
@stanmeyerlives believe you me i was using the 8xa i will be doing a video shortly
6.5 volts at 5 amps why that is i dont know with a 16 plate dry cell and bubbling crazy but with K.O.H no K.O.H no gas i have tried everything different coils transformers the lot
@theoneagain That may be true, but we don't want to be like them, we are following Stan's design - not theirs. What's the point in going through all the effort if in the end you are only using normal electrolysis?
@theoneagain Wrong again - KOH and NAoH are both caustic, dangerous, and eat some engine parts. The last thing I want in my vehicle is my aluminum heads dissolving. This is the DEMO unit made for the patent office, and no adjustments are needed - build it per Stan's specs and it works, simple as that. You came too late to tell me it doesn't work because I've already seen it work personally countless times!
@theoneagain The 8xa is not designed for a dry cell and we aren't interested in that. Why waste your time mixing up different designs - They are two different technologies.
@theoneagain You're certainly not using Stan's design if you have current that high. Stan used HIGH voltage but LOW current. You are using plain electrolysis it appears, which defeats the whole purpose! PWM units are made for the 'brute force' traditional electrolysis, it generates lots of heat, dissolves the metal plates in the cell, and that is not what we want here.
this circuit will not work on a dry cell i have done my tests without k.o.h no production at all. With K.O.H you get some production i have at a stream of bubbles at 60 watts 5 amps 6.4 volts it has its limitations need to make a pwm using the same signal from this board . No one has come up with any descent gas output with this circuit i am having trouble myself and will not work in an automobile with a pwm i get 3 litre per minute at 300 watts enough to make a torch.
@theoneagain Speak for yourself. I know of many people using this circuit to SUPPLEMENT the fuel in their cars for better mileage. No one is talking about running an engine completely on water - YET. We are not interested in running a dry cell. The idea no one has made any decent gas output is also false. This puts out more gas than any of Stan's circuits yet tested. You can't take ideas from everywhere, put them all together and expect it to work. You must do what Stan did to get his results...