RC 101: What to do if your nitro engine won't start!!!

Sdílet
Vložit
  • čas přidán 20. 08. 2024
  • NEW VIDEOS EVERY TUESDAY & THURSDAY
    In this video i help troubleshoot some of the problems that occur when you are trying to start a nitro engine. I go over some very important things that help ensure that your nitro engine will start every time you go to try and start it. I hope you enjoy :)

Komentáře • 60

  • @rcbeck8784
    @rcbeck8784 Před rokem +1

    This is the best video I've watched on how to tune step by step .

  • @trickmustang1994
    @trickmustang1994 Před 3 lety +6

    Some glow plugs that are bad will still glow with the igniter. The way you can tell is the motor will die as soon as the igniter is removed. This means that the platinum on the plug is gone. Good info in video. Keep burning nitro.

  • @novaji3990
    @novaji3990 Před 3 lety +5

    I watch a lot of tuning videos hands down dude you got the best

  • @user-tm7qt1qy3o
    @user-tm7qt1qy3o Před 5 měsíci

    Thank you because of you I got it started today. Great job. Buddy

  • @MidgetPunter
    @MidgetPunter Před 3 lety +5

    Need to adjust the camera angle cause everytime you go to show something you move the car out of the field of view.

  • @anonymousmc7727
    @anonymousmc7727 Před 3 lety +6

    I was looking in my garage the other day and in a box I found a xray nt18 a sportwerks chaos and a rc18r team associated;)

  • @garrettdreyer9976
    @garrettdreyer9976 Před rokem

    Hay awesome video helped me out a lot! Couldn't see where your showing the adjustment screw that you were adjusting but I figured it out. Thanks! From G.

  • @purpledonatello
    @purpledonatello Před 3 lety +3

    Good information. Now I bit understand why a lot of people wrap some type of tape heater around the heat sink. Also haven't anybody mention this, but they do sell those little fuel pump primer. This hopefully will lessen the pullstart wear n tear. I don't mind at all replacing the pullstart. It doesn't look to difficult.

  • @nighthawkj30A4
    @nighthawkj30A4 Před 3 lety +3

    Very helpful video ill use this for Traxxas Tmaxx Pro 15.

  • @lamarfullerton7547
    @lamarfullerton7547 Před 3 lety +3

    If u take glo plug out after driving it last longer. Cover top of engine when doing

  • @roccojoubert5868
    @roccojoubert5868 Před 3 lety +2

    Love this vido help me sososo much

  • @jmilla5172
    @jmilla5172 Před 3 lety +2

    Thanks, This Was helpful for sure

  • @rebekahfrench5747
    @rebekahfrench5747 Před 3 lety +1

    Flood it, purge it, plug it - glow. Should start n run everytime.. no fail.. mine sit for months. No problems..

  • @pauladams1006
    @pauladams1006 Před rokem

    Nice video thank you ☺️

  • @unknownsayjin
    @unknownsayjin Před 3 lety +1

    Awesome Video! helped me out alot Thanks!

  • @hizzleman4111
    @hizzleman4111 Před 2 lety +1

    Can you provide an Amazon link for the glow igniter?

    • @thercgarage1443
      @thercgarage1443  Před 2 lety +1

      ShareGoo RC Glow Plug Starter Igniter Ignitor 6V-24V for 1/8 1/10 RC Nitro Model Car Buggy Truck Boat,Blue www.amazon.com/dp/B08FBYXTQ1/ref=cm_sw_r_cp_api_glt_fabc_72DA4WKBDMVP8W4H2RBM

  • @deontetanniehill3225
    @deontetanniehill3225 Před 3 lety +1

    Hey man I have a Jato 3.3r I've just got it back from Hobby Town and he said it was fine. I got it back and hasn't ran since. I've replaced a couple of lines. New glow plug and I can't even get it to ignite. Can u help please. The Jato is in great condition. Like I said the easy start light say motor only . The glow plug want ignite even new glow plugs. Can help me man

    • @thercgarage1443
      @thercgarage1443  Před 3 lety +3

      Get a glow plug igniter the little blue wire sucks and doesn’t make the glow plug light up enough

    • @deontetanniehill3225
      @deontetanniehill3225 Před 3 lety +2

      @@thercgarage1443 ok thx

    • @deontetanniehill3225
      @deontetanniehill3225 Před 3 lety +1

      Yeah I just got a new igniter. She is definitely a awesome car.

  • @blaqkyellow
    @blaqkyellow Před 3 lety

    Never seen someone do too many turns on the carb. The best way I seen is to to do 1 needle at a time. This is going to throw ppl off.

  • @damiangessner9985
    @damiangessner9985 Před 3 lety +1

    What If ur smokes heavy when you hit the throttle

  • @handyhelpingchannel8031
    @handyhelpingchannel8031 Před 3 lety +1

    I have brought a rc car of my mate for cheap but it’s a really rare one and i have made everything work receiver and all electrics but now I’m trying to start it my engine won’t start can you help

  • @ninjaxgaminggamingchannel3082

    If you have weak compression but not terrible is there still a chance the engine won’t start or pull fuel/ won’t prime like not having pressure to pull fuel to start

    • @thercgarage1443
      @thercgarage1443  Před 3 lety

      Yes

    • @ninjaxgaminggamingchannel3082
      @ninjaxgaminggamingchannel3082 Před 3 lety

      @@thercgarage1443 and once an engine has weak compression there’s no fixing it ?

    • @thercgarage1443
      @thercgarage1443  Před 3 lety

      @@ninjaxgaminggamingchannel3082 you can rebuild it

    • @ninjaxgaminggamingchannel3082
      @ninjaxgaminggamingchannel3082 Před 3 lety

      @@thercgarage1443 and also one last question if a gas tank has a leak can that be the cause too and I could just do a quick gas tank swap from my other nitro

    • @thercgarage1443
      @thercgarage1443  Před 3 lety

      @@ninjaxgaminggamingchannel3082 yeah gas tanks can cause issues too if it’s older

  • @louismays9708
    @louismays9708 Před rokem

    I need help with my Traxxas nitro they left bad gas in it rc shop claims they cleaned it but it still won't run very long and quit. Is it carb time?

    • @thercgarage1443
      @thercgarage1443  Před rokem

      Reset the carb needles to the factory settings and try to tune from there if that doesn’t work you might need to rebuild the carb or replace it all together

    • @louismays9708
      @louismays9708 Před rokem

      @@thercgarage1443 ty

  • @Gamer-hh2dl
    @Gamer-hh2dl Před 2 lety

    Hey, I have problems with my nitro engine. I have The same engine as shown on this video but i cant get it tuned right. It seems to be too rich (it Took 14 seconds to cut off during pinch test. I tried to Lean it out from lsn but at first it Took The same 14 seconds to cut off. Then i tried to Lean it out More but then it didn't Even start) and i wonder how much The Idle and hsn effects to it. Also when i turned The car over there was coming a lot of Fuel from The exhaust.

    • @thercgarage1443
      @thercgarage1443  Před 2 lety

      Yeah the reality is that these engines just aren’t good I had problems tuning one on one of my other cars there are just cheap and not well built, like I had to replace o rings on carburetor right out of the box because they were the right ones so you could try that to start and see if that helps and try to find any place that u might have a leak or a bad seal but Ultimately these engines just aren’t good

  • @miggig9289
    @miggig9289 Před 2 lety

    My slash nitro flywheel got stuck . I barley got it today and I was trying to break it in . An out of nowhere the flywheel got stuck don't move I have to force it ? Can u help me out

    • @thercgarage1443
      @thercgarage1443  Před 2 lety

      Is the engine locked up or just the fly wheel?

    • @miggig9289
      @miggig9289 Před 2 lety

      @@thercgarage1443 the flywheel man won't move all at

  • @TheDannywolski
    @TheDannywolski Před 9 měsíci

    I have the same one

  • @benheard7634
    @benheard7634 Před 2 lety

    Hey my rc nitro truck want started

  • @xoibor
    @xoibor Před 3 lety

    I know this is a dumb quiestion but you need a battery in the car to run the servos right?

    • @thercgarage1443
      @thercgarage1443  Před 3 lety

      Yes you do it’s either double a’s or a hump pack I usually run hump packs in my cars cuz they are rechargeable

  • @OwO_X3_
    @OwO_X3_ Před rokem

    unfortunatly none of these worked

  • @ColoradoKTM
    @ColoradoKTM Před 3 lety +1

    I’m sure nitro fun and all but between the gas smell, noise and all the other unnecessary bs , just to say you run nitro is far from the best idea. Try electric, I did and haven’t looked back.
    Electric is just as fast and just as fun without the smell or dealing with a tiny engine.
    Unless you are really just into the hobby for fixing and wrenching. Which is great. But for consistency I feel the switch to electric was the best move I’ve made.
    I hope you get it figured out. Nothing more fraud than thinking yup figured it out and then it’s midnight and have to start over.

    • @thercgarage1443
      @thercgarage1443  Před 3 lety +1

      I run both and I love electric as well but I like smells and noises so it’s just what you prefer and I started with nitro so it will always be my favorite but like I said I love electric aswell

    • @ColoradoKTM
      @ColoradoKTM Před 3 lety +2

      @@thercgarage1443 if the wife wasn’t final say, I’d at least have 1. I can also admit I know nada about real engines and the way they work so hats off there.
      I can still smell at the motocross track as a kid and the racing environment wouldn’t have been as memorable if it weren’t for the buzz of two strokes and the smell of my youth.
      I’m a little jealous lol

  • @bubbanelson7547
    @bubbanelson7547 Před 10 měsíci

    I have a jato and my esc light wont come on..new batteries in everythinh new ...any suggestions?

  • @Mrgixxer-mj9pi
    @Mrgixxer-mj9pi Před 2 lety

    Well that was 22 mins of my life completely wasted

  • @guymarotta2596
    @guymarotta2596 Před rokem

    Buy an electric rc car!!

  • @Mike-tn3wc
    @Mike-tn3wc Před rokem

    Not the video to watch if your trying to get your truck running. There are definitely WAY BETTER videos