My Ink has been sitting in the tank for 3 years, can I suck out the Ink, and put in new ink, then fill it up and buy your product and do the cleaning? Please Advise? It prints blanks now...
I'm back with an update. After using your cleaning kit, followed by two power cleanings 24 hours apart and an eventual slow improvement in printing quality each time, as of right now, my printer is printing as if it was brand new! Thank you SO much for your product and your video!!!
I have a ST- M1000 which is slightly different with just black ink and no read out screen. It is only 1 year old used lightly. With no read out window, how do I run a nozzle report, etc? I bought the kit to do a cleaning and making sure I understand everything before. Thank you!
I'm in the printing blank pages category and NOTHING has fixed it (head cleaning, nozzle check, power cleaning, etc, uninstall/reinstall drivers (thought maybe software glitch). My tank is about a third full and the ink in it is from the first bottle I bought with the printer two years ago. I have a new bottle of ink already on the way, and I just ordered your cleaning kit. My question is, should I be concerned about mixing new ink with the old ink? should I try to get the old ink out? or should cleaning the nozzles work? and the ink is ok? It was printing fine up till a few days ago when blanks started. PS Epson overseas "tech" support was useless. When the head cleaning and power cleaning process did nothing, that was the end of their options to try and went straight to "send it to an authorized repair center". Thank you so much for this video!!
Hi Kimberly, so you can definitely use other types of ink as long as, ( obviously) its the same color. I hope this helps, please create a new comment if you have any additional questions, (its the only way I can see the comment, if it is new)
Thanks, your method works. But I used 1ml cleaning liquid in each tube, this is enough and the printer stays dry. I need a service manual for this printer, where can I find it?
I have this model of printer, when I am doing the installation the interface to load the ink does not appear, causing that when I want to print the sheet comes out blank.Does anyone else have the same problem and how can I fix it?
Epson m2170 printer give balnk printe when i do head clean some page give proper and after some time same balnk page and after same process head clean after work properly some time and same problem after some time blank page ..i do also all settings (driver update paper setting ink resset etc.) Pls help find out this error
Fix Your Printer Today! 🛠 Order Your Printer Cleaning Kit Now and Get Your Printer Working Like New! 🌟 Click Here to Buy: geni.us/wArXsZT
My Ink has been sitting in the tank for 3 years, can I suck out the Ink, and put in new ink, then fill it up and buy your product and do the cleaning? Please Advise? It prints blanks now...
I'm back with an update. After using your cleaning kit, followed by two power cleanings 24 hours apart and an eventual slow improvement in printing quality each time, as of right now, my printer is printing as if it was brand new! Thank you SO much for your product and your video!!!
Awesome! Consistency is the key!
Thanks a lot for the video. It helped me to solve the problem of air in the hoses!
Thank you very much from Brazil!!
Great! Brazil I love it!
Nice man, Let me try... if print head is open and cleaned up, i was expected, anyway you shown me the shortest route. Thank you.
Glad I could help
Dude, thank you so much for this video, really helpful !!!!
Glad it helped!
I have a ST- M1000 which is slightly different with just black ink and no read out screen. It is only 1 year old used lightly. With no read out window, how do I run a nozzle report, etc? I bought the kit to do a cleaning and making sure I understand everything before. Thank you!
I'm in the printing blank pages category and NOTHING has fixed it (head cleaning, nozzle check, power cleaning, etc, uninstall/reinstall drivers (thought maybe software glitch). My tank is about a third full and the ink in it is from the first bottle I bought with the printer two years ago. I have a new bottle of ink already on the way, and I just ordered your cleaning kit. My question is, should I be concerned about mixing new ink with the old ink? should I try to get the old ink out? or should cleaning the nozzles work? and the ink is ok? It was printing fine up till a few days ago when blanks started. PS Epson overseas "tech" support was useless. When the head cleaning and power cleaning process did nothing, that was the end of their options to try and went straight to "send it to an authorized repair center". Thank you so much for this video!!
Hi Kimberly, so you can definitely use other types of ink as long as, ( obviously) its the same color. I hope this helps, please create a new comment if you have any additional questions, (its the only way I can see the comment, if it is new)
Any tips on how to fix the paper crunching as it feeds in to print I been getting a lot of this issue not sure how to fix it ?? please help
Make sure there's no obstruction in the rollers
Thanks, your method works.
But I used 1ml cleaning liquid in each tube, this is enough and the printer stays dry.
I need a service manual for this printer, where can I find it?
Great, you can find a service manual on Google.
Thanks, I did.
Do make videos on paper jam
we have the same error but no paper is found to be stuck,,please help
I have this model of printer, when I am doing the installation the interface to load the ink does not appear, causing that when I want to print the sheet comes out blank.Does anyone else have the same problem and how can I fix it?
Hmm
Hi sir I need head cleaning liquid
Yes, it is for sale in the description,
Epson m2170 printer give balnk printe when i do head clean some page give proper and after some time same balnk page and after same process head clean after work properly some time and same problem after some time blank page ..i do also all settings (driver update paper setting ink resset etc.) Pls help find out this error
Проблема в помпе
Yes, make sure you are using new ink.