Video

Thanks, figuring out where this maintenance cartridge was in the online manual was impossible!

Unable to open the door. What am I doing wrong???

I watched several videos to try to get my ET-2850 printer working again. Yours was very clear and easy to follow. I cleaned all 4 printheads as I wasn't able to get any of the colors to print. After following the process, I now have yellow printing, but not the other colors. I am purchasing another kit and will go through it again with the 3 stubborn colors. I am praying it works....2 printers having the issues and my customers await!

Thank you Printer Guy!

Hi, last time I tried to do that. I broke my other printer so I have to get a new one, but it’s still giving me the same issue for some reason the cayman blue is the only one that gets messed up even in my other one is any other way that you can clean up without going through all this I bought my printer two months ago and it’s already gave me the same issue as my old one, and the other one only had it for five months

Black would barely print. Watched the video and got the kit. Lots of resistance on injection that has gotten slightly better (and soaks the towel underneath). Tried to print after allowing 24 hour dry. Now no black ink prints. Heated fluid and flushed again and will leave tube attached with fluid (still have to use force to inject). Now I need to buy more cleaning fluid. Also bought new cartridges because my colors are also out (after doing self cleaning). Magenta is equally difficult to inject but still prints. Should I keep trying?

WOW!!! @2:30 you finally BEGIN to give printer eval. Talk about stringing-us-along. Elementary, cheap and comical. Shocking you have 54k subs who have allowed you (and ads) to pull their attention. smh...

ok, this was the ANSWER I had been looking for. Ordered your kit, removed print head, flushed the yellow as that nozzle was my main issue. THANK YOU! Saved me from having to buy a new printer after just purchasing new inks thinking that the cheaper inks were to blame.

hello Thank you for your tutorial. I purchased a product identical to the one you present. I followed the instructions. but there is a problem when I push on the syringe the liquid comes out through the cartridge inlet nozzles. I can see the circulation of the ink very clearly in the pipes but everything comes back to the cartridge access and almost nothing comes out through the heads. Do you think this is normal and what do you think is the solution?

Can I use the cleaning kit for sublimation printing?

I’m having a hard time deciding between this printer and the 8500 for my art prints

How do I print out the spec sheets when I need to buy a printer 😮

I have an Epson Workforce pro WF-4820 printer it has a problem like that (The ReadyPrint service is unavailable due to an account issue. Log into your ReadyPrint account to resolve. After resolving the issue, select "Reconnect". Error code :950141 Reconnect or dismiss) Can you help me please how can resolve this issue please

what about if the solution is not going through even if is hot ?

@kingfarofaro 0 seconds ago after 2 weeks i have to throw it nothing except lost money ink very expensive even if you do wait few day to buy the ink cartridge the printer become disables wasting money junk

@kingfarofaro 0 seconds ago after 2 weeks i have to throw it nothing except lost money ink very expensive even if you do wait few day to buy the ink cartridge the printer become disables wasting money junk

Ok I followed all the steps ( I have converted mine to eco solvent) and now it’s printing blank I did the power cleaning after also .. so do I need to repeat the cleaning solution process ? or just do another power cleaning or print head cleanings ? Also had a question.. when pushing the solution through magenta it came out through the yellow. Does that mean it’s still clogged ? Cause when I did yellow it came out through magenta also instead of flushing out under the print head but black and cyan did not do that. Thank you !🙏🏻

What about changing size of paper, how you load photo size into tray?

My Epson ET-2850 printer prints double, it is not a continuous line but rather one appears next to the other. I did what you indicated but I still haven't corrected it, I would like to send you a sample but I don't know how to do it, I don't know if you have Instagram and thank you

Thanks for the video! Really appreciate it. However once I reinstalled I am now getting errors that the cartridges are not genuine or the printer head is not detected. Thoughts?

is there avideo like that for G3000

Thank you!!

Thank you! Super helpful!

I need this and a tutorial for the Epson WP-4025, please. Thank you so much! Greetings from Germany.

I can't get the syringe attached to the nozzle. Hints?

Hey Printer Guy - thank you for answeriing my email - The part about the no name brand ink really made me feel great - for all I have been hearing is no don't buy that or it will ruin your printer, thank you for the prices of name brand Epson is outrageous, I haven;'t used the no name yet but you are the best in my book, I will watch you and enjoy your comments. What is your opinion about the GEEK Squad??

could I use IPA to clean the head, sir?

I hate hate my epson printer

Hey, thank you very much!

Very useful! Thanks ❤

My black and magenta is not printing, saw your video and follow the instructions on the black and magenta but noting is coming out just the blue and yellow is coming out on the tissue, the magenta keep blowing out the syringe not sure why.

My ink spilled inside of my printer because it was turned upside down and now it won't work helppp

Thank you so much!!

thank. for video work your thumbnails vidéo i m graphic designer i make thumbnail. 10$

merci pour la vidéos

améliorer vos miniature vous allez attirer plus d'audience

merci ameliorer votre contenu surtout vos miniature CZcams travaillé les ou embocher une personne pour ça moi par exemple 10$ thumbnails

Canon products are inferior. They're going bankruptcy the next 12 months. If you have one dump it it's not worth the aggravation it creates.

Printer GUY - I want to thank you for your comments and understanding, I am so glad I purchased the Epson 2400 Eco Tank printer, a little confusing right now but as with anythng , it takes time to get use to new items. I just don't understand why there isn't a printer icon on th bottom along with the volume control. I will watch more of your tutorials. Thank you Printer Guy you are # 1 for me !

Canon is going bankrupt their products have gone downhill over the last 10 years and the TS6420 is the latest disgrace sell your stock and throw that printer in the trash and get a real one

This worked for me, but once I cleaned the print head with the cleaning kit... I had to run the "Head Cleaner" multiple times.... and Voila!!!. Again I tried the "Head Cleaner" multiple times prior to buying the kit. Also I made sure that I flushed the ink tank from all cleaning solution by flusing it just air using the syringe, which will make a holy mess......

This was a really good video! It helped me out a lot! Idk if you still look at comments but I think I made a mistake and didn't unlock the print head before opening everything up. I ended up just pushing the block out of the way, but now I can't get it back in place. Will this damage the printer if I turn it back on without locking it place? Is there a way to get it back in?

ALOT messier than you made it look! Had to run cleaner and nozzle check multiple times (7) until it printed fine. Now will wait and see if it stays working fine. will update

Thank you, I fixed my printer!! :D

Thank you for the video, but unfortunately my printer still won’t print black. What should I do next. Thank you for advice

You mentioned double-sided scanning in the video but I can't figure out how to set that up. Help?

My ET7700 started throwing blank sheets. I had been working on the ink pad which was saturated and had tilted it 45 deg. The data ribbon was wet with ink when I checked. Does ink short out electricity?

Hi. I cleaned and serviiced my printhead changed with new cartridges and the printer still gives me message " one or more cartridges appears to be damaged etc...". Any hint? Thanks

Did you load the sticker paper backwards for making stickers?