Infinit G35 possible starting issues?
Vložit
- čas přidán 25. 08. 2024
- Couldn't start my car, just kept cranking over and over, then I noticed that specific ground wire was free and loose. After I pinched it under the bracket, car fired right up. So if your having an issue starting your infinit or 350, and your not getting any codes, check this wire. Make sure it is grounded securely.
I know this is an old video but I just wanted to say THANK YOU. My car literally ran fine, then the next day it would crank but wouldn’t start. No check engine lights so I wasn’t going to change any sensors. I watched this video and went back to check that wire, the bolt was lose (hand tight) and I was thinking it couldn’t be that simple. I tightened the bolt all the way down and the car fired right up. I was pissed and happy at the same time 😂
Not a problem. Again I'm glad this video has helped another fellow G owner keep their baby running.. thank you for your reply it makes this all the more better. Every time I see on fb or on the forums of it not starting I send them this and about 8 out of 10 ish it fixes the issue. I'm glad and happy it fixed yours my friend. Enjoy
i so hope this fix my issue lol i dont understand why my g wont start lol
@@djwhytashofficial6502 i hope you had success with this and hopefully your baby is back on the street. if not then maybe we can go over a few things to try and help you out
@@LoneReble06 hey there update.... the battery was leaking so i got a new battery in n she started up :-) just hoping now this overheatng issue dont start up again cause i just changed the headgasket
@@djwhytashofficial6502 im glad you were able to figure it out, one tip for you. if you just did a headgasket, these cars are horrible for bleeding the coolant system. i re did my radiator along with all the hoses, it took me burping my system several times over, so if you have overheating issues, dont panic, www.amazon.com/EPAuto-Radiator-Coolant-Filling-Funnel/dp/B01I40ZQWE/ref=sr_1_3_sspa?crid=QJPHWGUYJ08V&keywords=radiator+fill+kit&qid=1655935466&sprefix=radiator+fill+kit%2Caps%2C95&sr=8-3-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExWk5RQk5GMTMyMkpNJmVuY3J5cHRlZElkPUEwNjU1MDQwMzEzMUlEUzBNVlcxQiZlbmNyeXB0ZWRBZElkPUEwMzU4MzkyMjRBN1MzV1BCTjJZSyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
go grab this kit for your car it will help
park and raise the front end of your car as high your car jack can go. use the kit i suggested and let your car run for awhile, give it some revs and hold it for a few minutes at a time. soone enough it will burp itself out of air
Bruhhhh, I just saw this and was like “oh I know mines fine and connected”. Turns out that was the whole ass problem, mine was broken too. Jerry rigged it and now it runs again!
Glad to hear that. Glad to hear another G is back on the road again
Damnnn I spent overnight $400 dollars buying parts trying to figure out whats the problem.. just to find out the problem was a easy fix with no cost lol my car crank right up thanks man
I'm glad to hear it, sorry you had to spend money that might have been needed but st least you have your car back on the road where it belongs
You just solved my problem, thanks for keeping it short and sweet
Glad it helped
For real tho? Did it really....
Damn everyone needs to see this. I gotta try this on my G.
Been trying to get the word out. Alot of people who own z and gs think it's the sensors in the back. But this is the true culprit I've come to find out. Hope this works and helps you out. This small wire will not throw any codes. But this small wire will cause all 99 problems
@@LoneReble06 My wires are fine but it's an easy first thing to check
Man I just changed my valved covers after putting everything back it didn’t want to start. I watched your video and saw I had pulled off that ground cable, I connected it and fired right up. I owe you some beers message me so I can send you an electronic gift card just pick the place or store of your choice.
I appreciate the gesture brother I really do but it's not necessary. I'm glad that another g or z is still on the road because of this video.
Mission accomplished my reward is seeing other people's love pride and joy staying on the road. Makes me happy to hear another good ending my friend. Thank you for sharing
Seen this video and got the idea 💡
Bro I been working on it for 3 weeks I change spark plugs and injectors and coils then I saw this I walked up to it and it’s cut in half Reconnected it and started right up
I'm glad this video helped out. Another G or Z is back on the road I'm glad I made this video for that reason
Just fixed my car cuz of this
Good I'm glad to hear it, glad to see another car has been saved from the junkyard
Omfg thankyou so much i amost left my car at a tire shot had me stressed
You are most welcome I'm glad it helped another person keep their car on the road.
Easy fix because of you. Thanks.
Glad I was able to help. Glad another car is back on the road again and not heading for the scrapper.
Having same issue ,my car cranks but not firing plugs ,I suspect it's Grounding wire ,I checked everything is okay but don't know the issue, tomorrow I'm gonna try a luck.ECU okay, IPDM and that happened the day I lost my Coil through shortened wires😢😢,my car ever since is cranking non stop
Know where i can find the screws that fit there, had somebody working on it and they didn’t keep up with them 🤦🏽♂️
Your local hardware store should have them . Find a similar bolt or screw take it down to the hardware store and match up the bolts or screws
I have the same problem but I cranked it and it popped while trying to start it and I put a brand new timing chain on and still doing the same thing, I need some help
Having same issue ,it popped and smell Gas ,I think it's grounding wires to ECU,if you had Coils blown sometimes back ,I will give you feedback ,tomorrow I'm tracing ECU GROUNDING
My ignition is stuck any suggestions? I just replaced the camshaft sensors. I also got water in my car from rain.
Can you go into further details please. Like what's the car doing or not. Do you have power? Does it crank, does it not crank. Stuff like that
@@LoneReble06 when I put the key in the ignition it will not turn. The ignition is locked I tried everything I might need a new ignition cylinder but no really a sign of that being broken. I could be wrong. If I can do something temporary to turn the key that would be ideal for now. It’s at my job I need it home.
My car is a nissan v35 as to the g35 and it aint wont start up, so i cycle the key on the on a few times to prime and after three to 4 it would start and runs fine but when i turn off the car it wont start back like it suppose to.. ask suggestions
Just from the brief description it sounds like your fuel pump has gone out. It's a common problem between the g,z and v platforms as they use the same parts between them all. I suggest you start there with a new pump and filter kit, rockauto is a good source for parts, but if you can also look up how to check for fuel pressure as well that is a clear way to determine if it is a fuel pump issue before buying a new pump. Hopefully this starts you down a good path
Okay.. thanks
Whats that ground wire connected to ? The whole wire harness ?
To be honest I'm not sure I do know that if this ground is not attached it either takes out the ignition and or the fuel injectors. Or both. Causing a crank but no start, even hooked up to my computer, my comp still read the ecu but it couldn't tell me if the ignition or fuel was working at the time.
Sooo uhh lately ive been having issues where if i dont drive my G for more then 1 day sometimes on cold morning it cranks for like 5 seconds then barely catches on. I get a loud squel for a quick 2 seconds then it goes away. That’s expected bc i changed both belts w/o torque wrench so im sure theyre loose. But i went ahead and checked the ground wire and i have like 6 🤣. Is that normal ?
Yea sometimes the previous owners will add a grounding kit to the battery system to help with the electric system but this ground coming from the harness is a direct tie into your ecu and it will not start. This is important. But it never hurts to have more grounds. Sorry for the late reply
Mine does the same thing did you find out the problem?
My car is having a starting issue it’ll crank after 6 seconds of turning the key
Wait o got the g35 high rev I know I know trash but I don’t see that golden tube
The golden tube is heat wrap I did myself so that the harness doesn't become more brittle and cracked.
How you found out it was the ground wire? I'm gonna make sure my is connected ... what year is your G?
It was just out of the blue that I noticed that it wasnt connected anymore. It was kind of one of those checks we all do, where we shake everything grab everything making sure everything was tight and by chance my finger just runs across it. So I stripped the wire so I have some lead for it unbolted the nearest bracket, and slipped it underneath and tightened down the bracket and it fired right up after that. And I did take it off while running and it killed the car in the driveway.
@@LoneReble06 interesting to know this , thanks man!
You have that one I got 2 on mines can u help
If you have it or more going to it, it's a common ground for all de, uprev, and hr harnesses. Make sure both are making good contacts. If not strip back the wires and remake the connection and make sure it's grounded secured
czcams.com/video/prch4pMGJ_E/video.html this is what my car is doing but i saw no fix,can anybody suggest what this problem is?
Ok let's try and figure this out. 1st did you go through all, and I mean every fuse you have? 2 did you check the relays for the starter, swap them to see if they are bad. 3 Have you tried applying direct battery to starter motor power? 4 did you do any other mods or have taken apart the car in anyway?
Yes I checked every fuse in my idpm,fuse block in car and my relay is clicking but no I did not swap them around yet. No mods have been performed and yes I applied direct power to my starter solenoid and it does turn over and start.Still does exactly how it is shown in that video.A friend gave me this car and I have checked almost everything that should be checked for a no crank issue.
😂
If your laughing at my fast attempt to fix this, i have since fixed it and laid it down with a good connector
@@LoneReble06 no can't laugh at no one hear we all learn from each other