How to Pin the Crankshaft in your 2001-2016 Duramax | XDP Tech Tips
Vložit
- čas přidán 23. 07. 2024
- In this episode of XDP Tech Tips, we talk with our tech expert Mike to find out everything we need to know on what the XDP Duramax Crankshaft Pin Kit does, how it can prevent catastrophic damage, and keep your 2001-2016 GM 6.6L Duramax harmonic balancer in balance!
Get the XDP Duramax Crankshaft Pin kit HERE: www.xtremediesel.com/xdp-dura...
0:00 - Introduction
0:30 - Tech Q&A
3:25 - Required Tools
3:50 - Installation
www.xtremediesel.com/ - Auta a dopravní prostředky
I love XDP. All good experiences so far when ordering.
Thanks for the support Cesar!
Makes me mad that gm cheaped out on this critical area, they could have spent a few more dollars to key the crankshaft
Recommendations on reusing the crank bolt? To my understanding they were torture to yield, specifically on the lml? Though I’ve hear they’re ok to reuse?
I love you guys
Do you have tool for the dowel pin on cam shaft?
We do not have a camshaft pin tool available at this time but please check back often as we are always adding parts and tools to our inventory
Why 1 3/4 inch drilled when the pin isn't that long?
Good ?
Any idea why
How hard is it to pull off balancer after this kit is installed?
L Cazier, the pin is not permanent. The balancer can still be easily removed.
Definitely have to use a puller
Does this kit only work with the stock wheel or would it work with a fluidamper or ppe damper?
Yes, the XDP Crankshaft Dowel Pin Kit XD331 can be installed on a truck with a PPE, ATI, or a Super Damper but the counterweight must be removed before installing the drill collar. It's also not currently compatible with Fluidamprs made in 2020 or later that have six bolt-holes on the face of the damper
@@XDPDiesel thank you. Makes my part research a lot easier. Doing this out of my garage so I can’t easily remove a crank so I want to take every precaution I can.
Why not make the tool longer to cut a longer pin slot and cover both pins?? Eliminating both pins for one is better.
can this be done for an L5P?
this kit is only for the 2001-2016 GM 6.6L LB7, LLY, LBZ, LMM, and LML
@@XDPDiesel right on thank you
L5P doesn’t have this problem yet.
@@atx-cvpi_99 I hope your right!