Thank you I had the same exact problem I cleaned my throttle body and learned how thanks to your video and it fixed it I in about 93 close to 100 and it was bad and I removed gunk build up
Throttle bodies never get any attention. That ring of gunk restricts air flow at idle and sticks at first acceleration. Glad you were able to get your car back up and running brother. Thank you for the comment.
Throttle bodies never get any attention. That ring of gunk restricts air flow at idle and sticks at first acceleration. Glad you were able to get your car back up and running brother. Thank you for the comment.
I have this same exact car , I bought it brand new and it has something called auto stop where it turns off the car at stop lights to save gas. It doesn’t do it all the time but the dealer told me when the parameters are met then it shuts off to save gas but starts back when I lift on the brakes.
Can you make a new video on Chevy Malibu 2014 showing exactly which screws to remove (POV) please? My throttle body needs cleaning bc my Malibu is starting to kick/hesitate..
When you disconnect the battery to remove the throttle body, once u reconnected the battery after the install, did the computer resent the throttle body?
It would have been nice if you showed us how to actually remove the air box. I'm still trying to figure out how to do it and I can't mess with the throttle body unless that's removed first. Thanks for the video but it was no help to me
Anthony Jarrah 1/4 12 inch extension with 8mm socket. Reach in from the right side. It has a hose clamp that has to be loosened. Sorry I didn’t show that part.
If u can't reach it (it's not easy) use a quarter but hold it tight, you can break it loose that way like using a screwdriver, then just put your socket head on it with your fingers and turn till it's loose enough for u to pull the hose off
Throttle body (as it sits) on engine. You have 2 bolts in back (firewall side) and 2 in front (towards engine). The one that’s a little hard to get too is engine side (drivers side). The other ones are pretty easy. I can’t recall removing coolant hose.
Color me Beautiful I wish I could’ve found the problem with this one. The owner was a car dealership and decided to auction it off. I didn’t get to find what the issue was.
These engines are known for the intake manifold bolts backing out a bit or a lot. I had to tighten all my intake bolts down 2 1/2 turns, they backed out a bit. My car had the same issue, it's a vacuum leak on the intake, it helped my car out with this problem.
Thank you I had the same exact problem I cleaned my throttle body and learned how thanks to your video and it fixed it I in about 93 close to 100 and it was bad and I removed gunk build up
I have a 2014 chevy malibu lt 2.5 engine
Throttle bodies never get any attention. That ring of gunk restricts air flow at idle and sticks at first acceleration. Glad you were able to get your car back up and running brother. Thank you for the comment.
Throttle bodies never get any attention. That ring of gunk restricts air flow at idle and sticks at first acceleration. Glad you were able to get your car back up and running brother. Thank you for the comment.
How did you disconnect center clip from of the air box (near oil compartment) in order to get to the throttle body?
Small advice I was given was to always replace the throttle body mounting gasket everytime you service the throttle body.
Jon Crutt Got it bro. Owner just wanted throttle body cleaned.
But there is no gasket
@@jakensdieudonne3505 www.rockauto.com/en/catalog/chevrolet,2014,malibu,2.5l+l4,3305824,fuel+&+air,throttle+body+gasket,6474
I have an 2015 Malibu that has a bad IAC valve I looked everywhere for a replacement part I can’t find nothing any advice ?
Tengo un Passat VW 3.6 v6 2006 y quiero cambiar el aceite de trasmisión pero no encuentro donde
I have this same exact car , I bought it brand new and it has something called auto stop where it turns off the car at stop lights to save gas. It doesn’t do it all the time but the dealer told me when the parameters are met then it shuts off to save gas but starts back when I lift on the brakes.
When I was trying to clean my throttle body the butterfly wouldn’t fully open when pressing the gas I had to push it open to clean it
How did you get the middle hose off to pcv valves?? Would appreciate feedback. Thank you.
Man.. it really would have been great to do a how to video with instructions! We couldn't see one thing on the removal or the install!
Useless video !
Was there any codes that indicated it could be fuel pump?
is that the IACV on the side of the throttle body? have you ever replaced the IACV ?
Can you make a new video on Chevy Malibu 2014 showing exactly which screws to remove (POV) please? My throttle body needs cleaning bc my Malibu is starting to kick/hesitate..
It’s pretty hard to reach or see
Did you ever figure it out
If I remove the throttle body would I have to do a relearn
Yes. Ignition on for 30 seconds should do it
When you disconnect the battery to remove the throttle body, once u reconnected the battery after the install, did the computer resent the throttle body?
The car will reboot after but it’ll have a very hard idle. Just drive again and it should be fine after you let it rest
It would have been nice if you showed us how to actually remove the air box. I'm still trying to figure out how to do it and I can't mess with the throttle body unless that's removed first. Thanks for the video but it was no help to me
Anthony Jarrah 1/4 12 inch extension with 8mm socket. Reach in from the right side. It has a hose clamp that has to be loosened. Sorry I didn’t show that part.
If u can't reach it (it's not easy) use a quarter but hold it tight, you can break it loose that way like using a screwdriver, then just put your socket head on it with your fingers and turn till it's loose enough for u to pull the hose off
No sé descalibra cunado lo quita uno
No. Pero uno mismo lo puede calibrar. Vuelta a la llave sin arrancar (que no de matcha). Espere 10 segundos. Repita 3 veces y listo.
Solo a la primera vuelta de la llave
@@JoesBusBarn a la primera vuelta pero que no de marcha
Ignition on. Pero el motor apagado.
@@JoesBusBarn gracias me sirvió mucho siga subiendo más vídeos a su canal de CZcams.. mi carro jalo bien
You said hopefully, did he fix the issue or not?
Jakens Dieudonne Cleaning the throttle body got that car running and not stalling.
@@JoesBusBarn What kind of cleaner did you use ?
Theorle body cleaner.
@@JoesBusBarn Thanks .
Hey bro I took everything out but can’t take the throttle body out took out the three screws and don’t see anymore
Throttle body has 4 bolts holding it down. They are on a square pattern.
If you remove the coolant hose, that would make it easier for u to see
Throttle body (as it sits) on engine. You have 2 bolts in back (firewall side) and 2 in front (towards engine). The one that’s a little hard to get too is engine side (drivers side). The other ones are pretty easy. I can’t recall removing coolant hose.
I am having the same issue with the same vehicle, cleaned the throttle body but the dealer doesn’t think it’s the fuel pump
Color me Beautiful I wish I could’ve found the problem with this one. The owner was a car dealership and decided to auction it off. I didn’t get to find what the issue was.
Okay, thank you!
These engines are known for the intake manifold bolts backing out a bit or a lot. I had to tighten all my intake bolts down 2 1/2 turns, they backed out a bit. My car had the same issue, it's a vacuum leak on the intake, it helped my car out with this problem.
@@EXTRA_TUBO-i6u but with that issue you'll have a CEL. A fuel one that this one has most likely wont throw a code.
@@JoesBusBarn I thought you said on a different comment the fuel pump resolved it. So did it or didn't it?
Tengo uno pero yo quiero limpiarlo
Can't hear you at all
Did it fix the problem?
Hey there mark. I wish I could say yes but car had several issues. Car dealer decided to auction it off and I didn’t get a chance to finish.
Thanks Joe!
You gotta show people step by step. What screw to unscrew or what tools to use etc. At least make it POV .
Self explanatory when your there
bad video want to see how you do it