SC500-V3 - Folding Power Wheelchair & Scooter Carrier - Assembly & Installation
Vložit
- čas přidán 26. 07. 2012
- www.discountramps.com/wheelcha...
The SC500-V3 deluxe wheelchair and scooter carrier has all the premium features offered at a super low introductory affordable price! The main features of this mobility carrier are the folding design and extra long 59" loading ramp allowing for this carrier to be used on just about any vehicle with a 2" trailer hitch. With the pull of a hitch pin your carrier can be folded up vertical to the back of your vehicle to save space when parking in car ports, garages, or parking lots! The wheelchair and scooter carrier is constructed of steel, has a thick black powder coat to protect from the elements, and has a massive 500 lb weight capacity! The surface of the carrier is a heavy duty steel mesh with 1" square support tubes underneath which won't bend or flex from the weight of your scooter or wheelchair. The mobility carrier has everything you need for loading and hauling your expensive mobility device. Also available is a heavy duty anti-tilt locking device which will prevent carrier wobble during transportation. The hitch tube has a 5/8" hitch pin hole for included hitch pin and 1/2" hole for pinch bolt (if anti tilt can not be used) for securing the carrier to your vehicle and will work on Class III or IV hitches. Includes a 1 year warranty!
www.DiscountRamps.com - Auta a dopravní prostředky
Good visual , vocal and option with words you read as you go
Thank you for this much better instructive video than what came with the ramp.
I liked it a lot and very good material.
Thank you. Great information
Thanks. I will buy now ✅
I have this same unit. However, it is VERY heavy and not as easy as this video may appear. I don't use it for a wheelchair, but I am glad I am not disabled, because it is way to heavy for a disabled person.
Do you have an assembly & Installation video for the UC500 XL??
Has anyone figure out about license plate if you decide to leave the carrier permanently. Sometimes you fold the carrier and it cover the plate. May get a ticket when driving with the carrier folded. it is not easy to remove plate from the car often.
Any ideas appreciated. A little wabbly but a minor issue . I use a strap.
Have to paint the metal if there is a scratch to prevent rust.
Are these available in Australia
Cuanto cuesta y lo venden en Las Vegas bb.?
HI ka1133,
We are currently in the process of shooting video for the SC400-V2, SC500-AF, SC500-V3, and the UC500-XL carriers. It might be a while before the video is available for the UC500-XL. If you watched the SC500-V3 video, the UC500-XL is almost the exact same assembly and installation. You can also find step by step instructions for the UC500-XL on the product page at Discount Ramps . com
Said it wasn't compatible...
How much is it
Can you get these in the UK
I’m also interested if it is available in the UK👌
Didn't see how to attach to truck.
This was very hard to install. The holes didn't line up to put the hitch pins in. We had to drill to make holes wider the carrier shakes too much when in upright position on the swing away arm. Went to Harbor Freight to try to get something to stop the gate from shaking no luck. Do anyone have any suggestions that can stop my gate from shaking so much when it's in the upright position it seems like it's going to smack right into the back of my pickup truck
Tracy, we're sorry to hear you had difficulties with installing this carrier. Have you reached out to one of our customer service representatives? Please call them at 888-651-3431
Yeah I have a suggestion. Stop bitching and deal with it
I used a bungee cord to keep the right side from rattling
The rear license plate is not visible. Back to the drawing board.
Hi John, we recommend moving your license plate and mounting it to the carrier if it is not visible.
Where can you get spare spring pull pins ?
Ok how much are we talking for the ramp displayed in euros please do you ship to Spain
I already installed my ramp but it doesn’t look straight, or it doesn’t have to be straight?
Mine is not level ether
@@Bearlake1624 last week I was driving and omg the ramp almost got stock in a hole
Same issue so crooked and low..this winter I'm taking my time and see if it helps to be straighter going to lube and readjust the bolts
This carrier is VERY heavy! God help a person with a disability who has to use it alone. The spring pull pins need lubricated weekly or they'll stick and rust. Don't get me wrong, it's a very nice carrier but not without it's faults.