I have never in my life left a comment on a video it’s a waste of time but after the time I spent with this radio it was earned thanks man this really helped me out a lot nothing else worked and countless videos watched
use a paper clip or pin and push down on the reset pin hole for 5 minutes. It just does a soft reset. For a hard reset remove your battery negative cable for 15 seconds.
Thank 2lb 3oz baby Jesus. Saved me almost ripped it out the truck n just went bought a new one. First time it's done the black screen in3 years of having it. It was on but black screen and only play song for 2 sec then shut off. Thank you big dawg
@@aminoaacid4113 As long as u have the key turned forward to give the radio power it should work. The radio still works right? Even with a black screen?
I don't know about you brother but you are awesome I was about ready to take my stereo into the shop to get it fixed and what you said on CZcams totally fixed it thank you so much have a wonderful day
So what happened was most likely we either reversed the polarity when hooking up the camera to the 12v+ / trigger with the ground or more than likely just switched the setting by accident under “system” -> camera settings->camera polarity. Should be set to “Battery “ :)
@@vegetto109 use a paper clip or pin and push down on the reset pin hole for 5 minutes. It just does a soft reset. For a hard reset remove your battery negative cable for 15 seconds.
I tried everything I just got mine it’s brand new. Worked for a few days hit a button and bam black screen. I removed battery cable I pushed the reset button but didn’t push it for 5 minutes. Guess try that tomorrow. But undoing battery cable should have fixed it. Not looking good for me
I just installed a Pioneer in my F150, got the correct wire harness for it. Well it turns on and the pioneer loading screen comes up, but then it just stays blank. I can see light behind the screen, but nothing else happens. I followed instructions on YT how to install, so will see if this reset helps.
I'm going to try this later. Only had the new radio for a couple months just tweaking my speakers. The one time I decide to not touch the radio no more power smh lol
So in the bottom left of your head unit there is a little pin hole if you push a mechanical pencil or paper clip in and press the button for like 3 secs it rests it and it works amazing
I pressed the reset button & mine is still on a black screen with pioneer across it. This system has only been in for a year. Guess it’s trash idk but it’s frustrating!!
This sadly did not work for me just installed a new unit and was working fine soon as I connected back up camera screen went black. Tried disconnecting the battery. Seen this video and rest my radio but nothing. I’m going to change the fuse tomorrow hopefully that works but fuse looks good. Not sure what to do if the fuse doesn’t work
use a paper clip or pin and push down on the reset pin hole for 5 minutes. It just does a soft reset. For a hard reset remove your battery negative cable for 15 seconds.
Thank you so much man .. I have literally taken this same radio back to wal mart 3 times and I was thinking of making it four and the last one tomorrow.. I wonder what causes this problem ??
@@kelinakay7023 what helped resolve your problem? I noticed Mike was black screen after bass was too high as well. I’ve pushed the reset button but nothing so far
Hey guys I have a pioneer DVD AV Receiver AVH- P5200BT, and the screen isn't working on it, can anyone help with this? I'm a girl, so be easy with me..
use a paper clip or pin and push down on the reset pin hole for 5 minutes. It just does a soft reset. For a hard reset remove your battery negative cable for 15 seconds.
And I checked the fuses they’re not blown, just installed today and it was working fine although i made the mistake of connecting the grounds 🥴 but it was still working went to put in reinforcement bolts for the bracket and the screen just went out
From personal experience ove owned this radio for quite some time and have only reset it once. If that isnt the solution for your black screen then you may have a faulty head unit or a cable isnt plugged in correctly would be my guess...
use a paper clip or pin and push down on the reset pin hole for 5 minutes. It just does a soft reset. For a hard reset remove your battery negative cable for 15 seconds.
use a paper clip or pin and push down on the reset pin hole for 5 minutes. It just does a soft reset. For a hard reset remove your battery negative cable for 15 seconds.
You just saved me from driving my car straight off a bridge..... thank you sir you’re a true American hero 💪🏽👏🏽
I have never in my life left a comment on a video it’s a waste of time but after the time I spent with this radio it was earned thanks man this really helped me out a lot nothing else worked and countless videos watched
Dude if i could hear what u said maybe it would help me fix mine
use a paper clip or pin and push down on the reset pin hole for 5 minutes. It just does a soft reset. For a hard reset remove your battery negative cable for 15 seconds.
@@glenw9048 thanks babe
@@glenw9048 five min or 5 sec
@@marcomartinez9181 ⁵ hours
@@marcomartinez9181 5 sec
Aside from the audio issue midway through your video, this definitely helped me fix my black screen of frustration. Thank you very much! 🤙🏼
3 years later and this video is still paying off. Thanks for the info.
Just want to say a BIG THNAK YOU. This fixed my problem
Thank 2lb 3oz baby Jesus. Saved me almost ripped it out the truck n just went bought a new one. First time it's done the black screen in3 years of having it. It was on but black screen and only play song for 2 sec then shut off. Thank you big dawg
Bro! Ty! I’m an AV tech and was getting pretty frustrated trying to flash firmware and all kinds of nonsense
Thanks brother i was able to fix my buddies new truck at work this morning after watching your video!!! Have a good one man
How did you do if exactly? Mine doesn’t reset after pushing the button for 5s
Make sure u have it powered on and hold it for 5 seconds and it should work.
@@JoshA85 have the car powered on or the stereo? Or both? My stereo doesn’t turn on. Just black screen as if it’s off
@@aminoaacid4113 As long as u have the key turned forward to give the radio power it should work. The radio still works right? Even with a black screen?
Thank you but Jesus Christ my ears
I don't know about you brother but you are awesome I was about ready to take my stereo into the shop to get it fixed and what you said on CZcams totally fixed it thank you so much have a wonderful day
Your a life saver. My plan was going to unplug my battery to reset it
Thank you so much after watching many videos this one helped me out
Thanks, I was able to get my radio working again!
Much love bro 😭😂 you saved me from a heart attack
Worked for me , had just installed a back up camera, taught I short something. Wewwww. Thanks for your vid.
Great video! got the points straight across and definitely understood what you said!!
So what happened was most likely we either reversed the polarity when hooking up the camera to the 12v+ / trigger with the ground or more than likely just switched the setting by accident under “system” -> camera settings->camera polarity.
Should be set to “Battery “
:)
Life saver video 👍 saved a ton of hassle
You beautiful soul!!!! Same exact problem happened to me with the same radio and also installing a backup camera
Thanks so much worked like a charm 👍🏻
Omg your a huge help 😩 seriously I’ve been battling this radio for a full month
Tanayija Saunders ain’t no problem glad the video helped
@@pennington5355 what brand was that radio u had?
@@nellygarcia1941 avh-110BT pioneer
Bro you really helped me I was thinking that I had to get a new
Glad to hear it. Thats what its all about spread the knowledge
Thanks for sharing your video. This worked like a charm. I have a Pioneer AVH-600EX.
Such a simple fix who would have thought
Thank you! This helped so much
Thank you 😊 make my day i almost took out the radio to return it , 👍🎧👍👍🎶🎶👍
Whst did he say???
@@vegetto109 use a paper clip or pin and push down on the reset pin hole for 5 minutes. It just does a soft reset. For a hard reset remove your battery negative cable for 15 seconds.
I tried everything I just got mine it’s brand new. Worked for a few days hit a button and bam black screen. I removed battery cable I pushed the reset button but didn’t push it for 5 minutes. Guess try that tomorrow. But undoing battery cable should have fixed it. Not looking good for me
Thanks bud, worked like a champ
bro thank you so much ur a hero this was actually helpful 😂
Bro thank you lol I ripped everything apart but this fixed it
Np. Sorry the audio was trash. Many people have complained, but glad you could figure it out
Tkz bro it really helps me out
Thanks I was looking for this
Yes it worked, thaaaaaaaank you🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾
I’ve held the reset button for five minutes and nothing
Thank you very much you are genius
This helped me save alot of money
so glad i found this video
I just installed a Pioneer in my F150, got the correct wire harness for it. Well it turns on and the pioneer loading screen comes up, but then it just stays blank. I can see light behind the screen, but nothing else happens. I followed instructions on YT how to install, so will see if this reset helps.
Good shit that definitely worked thank you
Dude saved my ass would have never saw that
I'm going to try this later. Only had the new radio for a couple months just tweaking my speakers. The one time I decide to not touch the radio no more power smh lol
That does not fix the problem this head unit has. It only resets the radio. It will occur again.
Thank you so much ❤️ your a life saver I could kiss you😘
😊 there you go happy you got it working enjoy
@Pennington...Where's the reset button on the AVIC- 8500NEX ?
Bottom right.
Life saver!
Thank you so much!!
Will this work for me I kept disconnect and connecting my battery because I was working on my truck and now the radio won’t turn on
He help me fix mine look at ur use go at its a lil button push it for 5 seconds
Shit still workin til dis day b 🤣💯
Sheet hell yaaa brotha. Good shit.
Thanks I appreciate it that did trick
Bro! I'm gonna dance at your fucking wedding! You, sir, are the man.
Mines still won’t power up unless I pull stereo out and disconnect wires and fuse on the stereo itself. Any clue????
I can't hear the video can somebody comment what he said to do
So in the bottom left of your head unit there is a little pin hole if you push a mechanical pencil or paper clip in and press the button for like 3 secs it rests it and it works amazing
Does it help permanently or temperary
You just saved my life
DUDE IT FREACKIN WORKED
Tell me again, I completely missed how to fix the radio thanks to the Bluetooth audio switching over.
There is a little pin hole on the left side. Just stick a paper clip in there and hold down for a few seconds to reset it.
Thank man big help
Life saver thanks bro
I pressed the reset button & mine is still on a black screen with pioneer across it. This system has only been in for a year. Guess it’s trash idk but it’s frustrating!!
This sadly did not work for me just installed a new unit and was working fine soon as I connected back up camera screen went black. Tried disconnecting the battery. Seen this video and rest my radio but nothing. I’m going to change the fuse tomorrow hopefully that works but fuse looks good. Not sure what to do if the fuse doesn’t work
Thank you. Sure work..
You saved my day buddy
No problem man sorry the video quality wasnt great Bluetooth kicked in. .... glad it helped
Worked thank you
Can somebody help me, didn't understand what he said in the end, when I press in the reset for 5 or longer seconds it doesn't show anything
use a paper clip or pin and push down on the reset pin hole for 5 minutes. It just does a soft reset. For a hard reset remove your battery negative cable for 15 seconds.
Do u reset with car on or off?
Thank you so much man .. I have literally taken this same radio back to wal mart 3 times and I was thinking of making it four and the last one tomorrow.. I wonder what causes this problem ??
Mine was bass. It's a automatic shut down to protect the stereo from blowing or damage
@@kelinakay7023 why the bass?, I was moving the bass in my stereo and the next day the black screen appeared.
@@kelinakay7023 what helped resolve your problem? I noticed Mike was black screen after bass was too high as well. I’ve pushed the reset button but nothing so far
Same issue with my 4mounths old pioneer dmh-zf9350BT model it's 85000rs in india
Hey guys I have a pioneer DVD AV Receiver AVH- P5200BT, and the screen isn't working on it, can anyone help with this? I'm a girl, so be easy with me..
hi after resetting my android 11 radio because of a frozen sreen it wont turn on any more. Any idea?
Thanks dude fucking helped out alot
Thank you
Mine turned black and turned off my car and turn it back on and it worked
Has anyone has the same problem since. Mine also happened right after installing a new rear camera…
Anyone reading this and no solution: set your old radio to radio (fm/am) not Aux, then install the new head unit
I gonna try same issues I’m having
Thank youuuuu👏
Mine just shut off in the first fifteen seconds of the video lmao
I don't have that on mine. Wonder I'd there's another solution
What did he say? Audio fades out
use a paper clip or pin and push down on the reset pin hole for 5 minutes. It just does a soft reset. For a hard reset remove your battery negative cable for 15 seconds.
Thank u 😁😁😁😁
I hit the reset button and my screen is still black
And I checked the fuses they’re not blown, just installed today and it was working fine although i made the mistake of connecting the grounds 🥴 but it was still working went to put in reinforcement bolts for the bracket and the screen just went out
No power or nothing
So, you hit the reset button. Not to be mean, but isn't that a bit of an inconvenient solution?
From personal experience ove owned this radio for quite some time and have only reset it once. If that isnt the solution for your black screen then you may have a faulty head unit or a cable isnt plugged in correctly would be my guess...
the pin hole is just a soft reset. For a Hard reset you need to remove the negative battery terminal for 15 seconds.
Yess!
You barely hear anything what did you do
thank you bro, i ran into the same issue. much love
Wtf did he even say?
🐐 🐐
Saved me $149.00usd 2022 USA
You get an F for audio.
Really don't give a shit 😂
Yeah wtf bruh? Nice audio
That’s Bru 😂
Huh!? What!?!?
use a paper clip or pin and push down on the reset pin hole for 5 minutes. It just does a soft reset. For a hard reset remove your battery negative cable for 15 seconds.
Wtf did you do???? I cant heard shit man come on
use a paper clip or pin and push down on the reset pin hole for 5 minutes. It just does a soft reset. For a hard reset remove your battery negative cable for 15 seconds.
Have you been drinking??
No but I am now ..... watch the video and learn something 😂 ....tired of helping people
I my radio with no power
Just thank you, my God thank you. Just happened looked it up and ok 4 now.
Thank you so much!!!!